NAME¶

syslog.conf - syslogd(8) configuration file

DESCRIPTION¶

The syslog.conf file is the main configuration file for the syslogd(8) which logs system messages on *nix systems. This file specifies rules for logging. For special features see the sysklogd(8) manpage.

Every rule consists of two fields, a selector field and an action field. These two fields are separated by one or more spaces or tabs. The selector field specifies a pattern of facilities and priorities belonging to the specified action.

Lines starting with a hash mark (``#'') and empty lines are ignored.

This release of syslogd is able to understand an extended syntax. One rule can be divided into several lines if the leading line is terminated with an backslash (``\'').

SELECTORS¶

The selector field itself again consists of two parts, a facility and a priority, separated by a period (``.''). Both parts are case insensitive and can also be specified as decimal numbers, but don't do that, you have been warned. Both facilities and priorities are described in syslog(3). The names mentioned below correspond to the similar LOG_-values in /usr/include/syslog.h.

The facility is one of the following keywords: auth, authpriv, cron, daemon, ftp, kern, lpr, mail, mark, news, security (same as auth), syslog, user, uucp and local0 through local7. The keyword security should not be used anymore and mark is only for internal use and therefore should not be used in applications. Anyway, you may want to specify and redirect these messages here. The facility specifies the subsystem that produced the message, i.e. all mail programs log with the mail facility (LOG_MAIL) if they log using syslog.

In most cases anyone can log to any facility, so we rely on convention for the correct facility to be chosen. However, generally only the kernel can log to the "kern" facility. This is because the implementation of openlog() and syslog() in glibc does not allow logging to the "kern" facility. Klogd circumvents this restriction when logging to syslogd by reimplementing those functions itself.

The priority is one of the following keywords, in ascending order: debug, info, notice, warning, warn (same as warning), err, error (same as err), crit, alert, emerg, panic (same as emerg). The keywords warn, error and panic are deprecated and should not be used anymore. The priority defines the severity of the message

The behavior of the original BSD syslogd is that all messages of the specified priority and higher are logged according to the given action. This syslogd(8) behaves the same, but has some extensions.

In addition to the above mentioned names the syslogd(8) understands the following extensions: An asterisk (``*'') stands for all facilities or all priorities, depending on where it is used (before or after the period). The keyword none stands for no priority of the given facility.

You can specify multiple facilities with the same priority pattern in one statement using the comma (``,'') operator. You may specify as many facilities as you want. Please note that only the facility part from such a statement is taken, a priority part would be skipped.

Multiple selectors may be specified for a single action using the semicolon (``;'') separator. Please note that each selector in the selector field is capable of overwriting the preceding ones. Using this behavior you can exclude some priorities from the pattern.

This syslogd(8) has a syntax extension to the original BSD source, which makes its use more intuitive. You may precede every priority with an equation sign (``='') to specify that syslogd should only refer to this single priority and not this priority and all higher priorities.

You may also precide the priority with an exclamation mark (``!'') if you want syslogd to ignore this priority and all higher priorities. You may even use both, the exclamation mark and the equation sign if you want syslogd to ignore only this single priority. If you use both extensions than the exclamation mark must occur before the equation sign, just use it intuitively.

ACTIONS¶

The action field of a rule describes the abstract term ``logfile''. A ``logfile'' need not to be a real file, btw. The syslogd(8) provides the following actions.

EXAMPLES¶

Here are some example, partially taken from a real existing site and configuration. Hopefully they rub out all questions on the configuration, if not, drop me (Joey) a line.

# Store critical stuff in critical
#
*.=crit;kern.none            /var/adm/critical

This will store all messages with the priority crit in the file /var/adm/critical, except for any kernel message.

# Kernel messages are first, stored in the kernel
# file, critical messages and higher ones also go
# to another host and to the console
#
kern.*                       /var/adm/kernel
kern.crit                    @finlandia
kern.crit                    /dev/console
kern.info;kern.!err          /var/adm/kernel-info

The first rule directs any message that has the kernel facility to the file /var/adm/kernel. (But recall that only the kernel itself can log to this facility.)

The second statement directs all kernel messages of the priority crit and higher to the remote host finlandia. This is useful, because if the host crashes and the disks get irreparable errors you might not be able to read the stored messages. If they're on a remote host, too, you still can try to find out the reason for the crash.

The third rule directs these messages to the actual console, so the person who works on the machine will get them, too.

The fourth line tells the syslogd to save all kernel messages that come with priorities from info up to warning in the file /var/adm/kernel-info. Everything from err and higher is excluded.

# The tcp wrapper logs with mail.info, we display
# all the connections on tty12
#
mail.=info                   /dev/tty12

This directs all messages that uses mail.info (in source LOG_MAIL | LOG_INFO) to /dev/tty12, the 12th console. For example the tcpwrapper tcpd(8) uses this as its default.

# Store all mail concerning stuff in a file
#
mail.*;mail.!=info           /var/adm/mail

This pattern matches all messages that come with the mail facility, except for the info priority. These will be stored in the file /var/adm/mail.

# Log all mail.info and news.info messages to info
#
mail,news.=info              /var/adm/info

This will extract all messages that come either with mail.info or with news.info and store them in the file /var/adm/info.

# Log info and notice messages to messages file
#
*.=info;*.=notice;\
	mail.none  /var/log/messages

This lets the syslogd log all messages that come with either the info or the notice priority into the file /var/log/messages, except for all messages that use the mail facility.

# Log info messages to messages file
#
*.=info;\
	mail,news.none       /var/log/messages

This statement causes the syslogd to log all messages that come with the info priority to the file /var/log/messages. But any message coming either with the mail or the news facility will not be stored.

# Emergency messages will be displayed using wall
#
*.=emerg                     *

This rule tells the syslogd to write all emergency messages to all currently logged in users. This is the wall action.

# Messages of the priority alert will be directed
# to the operator
#
*.alert                      root,joey

This rule directs all messages with a priority of alert or higher to the terminals of the operator, i.e. of the users ``root'' and ``joey'' if they're logged in.

*.*                          @finlandia

This rule would redirect all messages to a remote host called finlandia. This is useful especially in a cluster of machines where all syslog messages will be stored on only one machine.

CONFIGURATION FILE SYNTAX DIFFERENCES¶

Syslogd uses a slightly different syntax for its configuration file than the original BSD sources. Originally all messages of a specific priority and above were forwarded to the log file. The modifiers ``='', ``!'' and ``-'' were added to make the syslogd more flexible and to use it in a more intuitive manner.

The original BSD syslogd doesn't understand spaces as separators between the selector and the action field.

FILES¶

/etc/syslog.conf

Configuration file for syslogd

BUGS¶

The effects of multiple selectors are sometimes not intuitive. For example ``mail.crit,*.err'' will select ``mail'' facility messages at the level of ``err'' or higher, not at the level of ``crit'' or higher.

SEE ALSO¶

sysklogd(8), klogd(8), logger(1), syslog(2), syslog(3).

AUTHORS¶

The syslogd is taken from BSD sources, Greg Wettstein <greg@wind.enjellic.com> performed the port to Linux, Martin Schulze <joey@infodrom.org> fixed some bugs, added several new features and took over maintenance.