General Options¶

--version

Display the version of UFRaw and exit.

--help

Display a brief description of how to use UFRaw and exit.

--maximize-window

Force window to be maximized.

--silent

Do not display any messages during conversion. This option is only valid with 'ufraw-batch'.

--conf=<ID-filename>

Load all parameters from an ID-file. This feature can be used to tweak the parameters for one file using the GUI and using those parameters as the starting point for other images as well.

Image Manipulation Options¶

These command-line options override settings from the default configuration of UFRaw and from any loaded ID-file. The best way to learn about how these parameters work is to experiment with the GUI. All parameters correspond exactly to a setting available in the GUI. Not all parameters in the GUI have corresponding command-line options.

--wb=camera|auto

White balance setting. "camera" means that UFRaw tries to read the color-temperature and green color component that the camera recorded in the meta-information in the raw-file. This does not work for all cameras. If UFRaw fails to read the white-balance information from the meta-information, it falls back to "auto".

"auto" means that UFRaw calculates the color-temperature and green color component automatically from the image data.

The white-balance can also be set manually with the --temperature and --green options.

--temperature=TEMP

Manually set the color temperature in Kelvin.

--green=GREEN

Green color component. Range 0.20 to 2.50.

--gamma=GAMMA

Gamma adjustment of the base curve. Range 0.10 to 1.00. Default 0.45.

--linearity=LINEARITY

Linearity of the base curve. Range 0.00 to 1.00. Default 0.10.

--exposure=auto|EXPOSURE

Auto exposure or exposure correction in EV. Range -3.00 to 3.00. Default 0.

--restore=clip|lch|hsv

Control how highlights are restored when applying negative EV. 'clip' restores nothing and is therefore safe from any artifacts. 'lch' restores in LCH space, resulting in restored highlights with soft details (good for clouds). 'hsv' restores in HSV space, resulting in restored highlights with sharp details. The default is 'lch'.

--clip=digital|film

Control how highlights are clipped when applying positive EV. 'digital' corresponds to using a linear response, emulating the harsh behaviour of the digital sensor. 'film' emulate the soft film response. The default is 'digital'.

--saturation=SAT

Adjust the color saturation. Range 0.00 to 8.00. Default 1.0, use 0 for black & white output.

--wavelet-denoising-threshold=THRESHOLD

Wavelet denoising threshold (default 0.0).

--hotpixel-sensitivity=VALUE

Sensitivity for detecting and shaving hot pixels (default 0.0).

--base-curve=manual|linear|custom|camera|CURVE

Type of tone curve to use. The base curve is a combination of the gamma curve corrected by the curve specified here. The base curve is applied to each channel of the raw data after the white balance and color matrix, but before the ICC transformation.

"manual" means that a manual tone curve is used. This is probably not very useful as a command-line option, since there is no way to specify what the curve should look like.

"linear" means that no tone curve corrections is performed.

"custom" means that UFRaw shall use the curve supplied by the camera in the meta-information in the raw-file.

"camera" means that UFRaw shall use the "custom" curve only if the camera was set to use it (according to the meta-information). Otherwise the "linear" curve is used.

CURVE can be the filename (without path) of any curve that was previously loaded in the GUI.

The default is "camera" if such a curve exists, linear otherwise.

--base-curve-file=<curve-file>

Load the base curve from a file. The curve file format can be either UFRaw's XML format or Nikon's NTC/NCV format.

--curve=manual|linear|CURVE

Type of luminosity curve to use. This curve is applied in HSV space and therefore hue and saturation should not be effected by it.

"manual" means that a manual luminosity curve is used. This is probably not very useful as a command-line option, since there is no way to specify what the curve should look like.

"linear" means that no luminosity correction is performed.

CURVE can be the filename (without path) of any curve that was previously loaded in the GUI.

The default is "linear".

--curve-file=<curve-file>

Load the luminosity curve from a file. The curve file format can be either UFRaw's XML format or Nikon's NTC/NCV format.

--black-point=auto|BLACK

Black-point value. Range 0.0 to 1.0, default 0.0.

--interpolation=ahd|vng|four-color|ppg|bilinear

Interpolation algorithm to use when converting from the color filter array to normal RGB values. AHD (Adaptive Homogeneity Directed) interpolation is the best, but also the slowest. VNG (Variable Number Gradients) is second best and a bit faster. Bilinear is the simplest yet fastest interpolation.

"four-color" is a variation of the VNG interpolation that should only be used if you see strange square patterns in the VNG interpolation, See <http://www.cybercom.net/~dcoffin/dcraw/>.

AHD is the default interpolation. AHD interpolation is not supported for cameras with four color filters, such as the Sony-828 RGBE filter. In such cases, VNG interpolation will be used instead.

--color-smoothing

Apply color smoothing.

--grayscale=none|lightness|luminance|value|mixer

Grayscale conversion algorithm to use (default none).

--grayscale-mixer=RED,GREEN,BLUE

Grayscale mixer values to use (default 1,1,1).

--darkframe=FILE

Use FILE for raw darkframe subtraction.

Output Options¶

The options which are related to the final output are:

--shrink=FACTOR

Shrink the image by FACTOR (default 1).

--size=SIZE

Downsize max(height,width) to SIZE.

--rotate=camera|ANGLE|no

Rotate image to camera's setting, by ANGLE degrees clockwise, or do not rotate the image (default camera)

--crop-(left|right|top|bottom)=PIXELS

Crop the output to the given pixel range, relative to the raw image after rotation but before any scaling.

--auto-crop

Crop the output automatically.

--aspect-ratio X:Y

Set crop area aspect ratio.

--lensfun=none|auto

Do not apply lens correction or try to apply correction by auto-detecting the lens (default auto).

--out-type=ppm|tiff|tif|png|jpeg|jpg|fits

Output file-format to use. The default output file-format is ppm.

--out-depth=8|16

Output bit depth per channel. ppm, tiff, png and fits output formats can uses either 8 bits or 16 bits to encode each of the Red, Green and Blue components of each pixel. The jpeg format only allows for 8 bits for each color component.

The raw-files contain more than eight bits of information for each color component. This means that by using an eight bit format, you are actually discarding some of the information supplied by the camera. This is not a problem if you only plan to view the image on screen. For prints you should consider a 16 bits workflow.

--compression=VALUE

JPEG quality factor. Range 0-100 with a higher number giving a higher quality at the cost of a larger file. Default 85. The --compression parameter is only relevant if the output file-format is jpeg.

--[no]exif

Embed exif in output. Default embed exif. Exif is currently embedded in JPEG, PNG and TIFF output.

--[no]zip

Enable [disable] TIFF zip compression. The zip-compression is loss-less. Default nozip. The --zip parameter is only relevant if the output file-format if tiff8 or tiff16.

--out-path=PATH

PATH for output file. In batch mode by default, output-files are placed in the same directory as the input-files. In interactive mode UFRaw tries to ''guess'' if you have a favorite output directory.

--output=FILE

Output file name to use. This is only relevant if a single raw-file is supplied on the command-line. . Use '-' to output to stdout. The default is to name the output-file the same as the input-file but with the extension given by the output file-format.

--overwrite

Overwrite existing files without asking. Default is to ask before deleting an existing file.

--create-id=no|also|only

Control whether UFRaw ID files are created for the output image. (Default is no).

--embedded-image

Extract the preview image embedded in the raw file instead of converting the raw image. This option is only valid with 'ufraw-batch'.