NAME¶

ldap - LDAP client

SYNOPSIS¶

package require Tcl 8.5

package require ldap ?1.10.1?

::ldap::connect host ?port?

::ldap::tlsoptions reset

::ldap::tlsoptions ?opt1 val1? ?opt2 val2? ...

::ldap::secure_connect host ?port?

::ldap::secure_connect host ?port? ?verify_cert? ?sni_servername?

::ldap::disconnect handle

::ldap::starttls handle

::ldap::starttls handle ?cafile? ?certfile? ?keyfile? ?verify_cert? ?sni_servername?

::ldap::bind handle ?name? ?password?

::ldap::bindSASL handle ?name? ?password?

::ldap::unbind handle

::ldap::search handle baseObject filterString attributes options

::ldap::searchInit handle baseObject filterString attributes options

::ldap::searchNext handle

::ldap::searchEnd handle

::ldap::modify handle dn attrValToReplace ?attrToDelete? ?attrValToAdd?

::ldap::modifyMulti handle dn attrValToReplace ?attrValToDelete? ?attrValToAdd?

::ldap::add handle dn attrValueTuples

::ldap::addMulti handle dn attrValueTuples

::ldap::delete handle dn

::ldap::modifyDN handle dn newrdn ?deleteOld? ?newSuperior?

::ldap::info ip handle

::ldap::info bound handle

::ldap::info bounduser handle

::ldap::info connections

::ldap::info tls handle

::ldap::info tlsstatus handle

::ldap::info saslmechanisms handle

::ldap::info control handle

::ldap::info extensions extensions

::ldap::info whoami handle

DESCRIPTION¶

The ldap package provides a Tcl-only client library for the LDAPv3 protocol as specified in RFC 4511 (http://www.rfc-editor.org/rfc/rfc4511.txt). It works by opening the standard (or secure) LDAP socket on the server, and then providing a Tcl API to access the LDAP protocol commands. All server errors are returned as Tcl errors (thrown) which must be caught with the Tcl catch command.

TLS SECURITY CONSIDERATIONS¶

This package uses the TLS package to handle the security for LDAPS connections.

Policy decisions like the set of protocols to support and what ciphers to use are not the responsibility of TLS, nor of this package itself however. Such decisions are the responsibility of whichever application is using the package, and are likely influenced by the set of servers the application will talk to as well.

For example, in light of the recent POODLE attack [http://googleonlinesecurity.blogspot.co.uk/2014/10/this-poodle-bites-exploiting-ssl-30.html] discovered by Google many servers will disable support for the SSLv3 protocol. To handle this change the applications using TLS must be patched, and not this package, nor TLS itself. Such a patch may be as simple as generally activating tls1 support, as shown in the example below.

    ldap::tlsoptions -tls1 1 -ssl2 0 -ssl3 0 ;# forcibly activate support for the TLS1 protocol


    ... your own application code ...

COMMANDS¶

::ldap::connect host ?port?

Opens a LDAPv3 connection to the specified host, at the given port, and returns a token for the connection. This token is the handle argument for all other commands. If no port is specified it will default to 389.

The command blocks until the connection has been established, or establishment definitely failed.

::ldap::tlsoptions reset

This command resets TLS options to default values. It returns the set of options. Using this command is incompatible with the obsolete form of ::ldap::secure_connect and ::ldap_starttls.

::ldap::tlsoptions ?opt1 val1? ?opt2 val2? ...

This commands adds one or more options to some value, and may be used more than one time in order to add options in several steps. A complete description of options may be found in the tls package documentation. Valid options and values are:

This command returns the current set of TLS options and values. In particular, one may use this command without any arguments to get the current set of options.

Using this command is incompatible with the obsolete form of ::ldap::secure_connect and ::ldap_starttls (see below).

::ldap::secure_connect host ?port?

Like ::ldap::connect, except that the created connection is secured by SSL. The port defaults to 636. This command depends on the availability of the package TLS, which is a SSL binding for Tcl. If TLS is not available, then this command will fail.

TLS options are specified with ::ldap::tlsoptions.

The command blocks until the connection has been established, or establishment definitely failed.

::ldap::secure_connect host ?port? ?verify_cert? ?sni_servername?

Note: this form of the command is deprecated, since TLS options had to be specified with a combination of parameters to this command (verify_cert and sni_servername) and arguments to ::tls::init (from package tls) for example to setup defaults for trusted certificates. Prefer the above form (without the verify_cert and sni_servername parameters) and set TLS options with ::ldap::tlsoptions.

If verify_cert is set to 1, the default, this checks the server certificate against the known hosts. If sni_servername is set, the given hostname is used as the hostname for Server Name Indication in the TLS handshake.

Use ::tls::init to setup defaults for trusted certificates.

TLS supports different protocol levels. In common use are the versions 1.0, 1.1 and 1.2. By default all those versions are offered. If you need to modify the acceptable protocols, you can change the ::ldap::tlsProtocols list (deprecated).

::ldap::disconnect handle

Closes the ldap connection refered to by the token handle. Returns the empty string as its result.

::ldap::starttls handle

Start TLS negotiation on the connection denoted by handle, with TLS parameters set with ::ldap::tlsoptions.

::ldap::starttls handle ?cafile? ?certfile? ?keyfile? ?verify_cert? ?sni_servername?

Note: this form of the command is deprecated, since TLS options had to be specified with a combination of parameters to this command (cafile, certfile, keyfile, verify_cert and sni_servername) and arguments to ::tls::init (from package tls). Prefer the above form (without specific TLS arguments) and set TLS options with ::ldap::tlsoptions.

Start TLS negotiation on the connection denoted by handle. You need to set at least the cafile argument to a file with trusted certificates, if verify_cert is 1, which is the default. The sni_servername can be used to signal a different hostname during the TLS handshake. The announced protocols are determined in the same way as ::ldap::secure_connect. You can specify a TLS client certificate with the certfile and keyfile options.

::ldap::bind handle ?name? ?password?

This command authenticates the ldap connection refered to by the token in handle, with a user name and associated password. It blocks until a response from the ldap server arrives. Its result is the empty string. Both name and passwd default to the empty string if they are not specified. By leaving out name and passwd you can make an anonymous bind to the ldap server. You can issue ::ldap::bind again to bind with different credentials.

::ldap::bindSASL handle ?name? ?password?

This command uses SASL authentication mechanisms to do a multistage bind. Its otherwise identical to the standard ::ldap::bind. This feature is currently experimental and subject to change. See the documentation for the SASL and the "SASL.txt" in the tcllib CVS repository for details how to setup and use SASL with openldap.

::ldap::unbind handle

This command asks the ldap server to release the last bind done for the connection refered to by the token in handle. The handle is invalid after the unbind, as the server closes the connection. So this is effectivly just a more polite disconnect operation.

::ldap::search handle baseObject filterString attributes options

This command performs a LDAP search below the baseObject tree using a complex LDAP search expression filterString and returns the specified attributes of all matching objects (DNs). If the list of attributes was empty all attributes are returned. The command blocks until it has received all results. The valid options are identical to the options listed for ::ldap::searchInit.

An example of a search expression is

    set filterString "|(cn=Linus*)(sn=Torvalds*)"

The return value of the command is a list of nested dictionaries. The first level keys are object identifiers (DNs), second levels keys are attribute names. In other words, it is in the form

    {dn1 {attr1 {val11 val12 ...} attr2 {val21...} ...}} {dn2 {a1 {v11 ...} ...}} ...

::ldap::searchInit handle baseObject filterString attributes options

This command initiates a LDAP search below the baseObject tree using a complex LDAP search expression filterString. The search gets the specified attributes of all matching objects (DNs). The command itself just starts the search, to retrieve the actual results, use ::ldap::searchNext. A search can be terminated at any time by ::ldap::searchEnd. This informs the server that no further results should be sent by sending and ABANDON message and cleans up the internal state of the search. Only one ::ldap::search can be active at a given time, this includes the introspection commands ::ldap::info saslmechanisms, ldap::info control and ldap::info extensions, which invoke a search internally. Error responses from the server due to wrong arguments or similar things are returned with the first ::ldap::searchNext call and should be checked and dealed with there. If the list of requested attributes is empty all attributes will be returned. The parameter options specifies the options to be used in the search, and has the following format:

    {-option1 value1 -option2 value2 ... }

Following options are available:

::ldap::searchNext handle

This command returns the next entry from a LDAP search initiated by ::ldap::searchInit. It returns only after a new result is received or when no further results are available, but takes care to keep the event loop alive. The returned entry is a list with two elements: the first is the DN of the entry, the second is the list of attributes and values, under the format:

    dn {attr1 {val11 val12 ...} attr2 {val21...} ...}

The ::ldap::searchNext command returns an empty list at the end of the search.

::ldap::searchEnd handle

This command terminates a LDAP search initiated by ::ldap::searchInit. It also cleans up the internal state so a new search can be initiated. If the client has not yet received all results, the client sends an ABANDON message to inform the server that no further results for the previous search should to be sent.

::ldap::modify handle dn attrValToReplace ?attrToDelete? ?attrValToAdd?

This command modifies the object dn on the ldap server we are connected to via handle. It replaces attributes with new values, deletes attributes, and adds new attributes with new values. All arguments are dictionaries mapping attribute names to values. The optional arguments default to the empty dictionary, which means that no attributes will be deleted nor added.

The command blocks until all modifications have completed. Its result is the empty string.

::ldap::modifyMulti handle dn attrValToReplace ?attrValToDelete? ?attrValToAdd?

This command modifies the object dn on the ldap server we are connected to via handle. It replaces attributes with new values, deletes attributes, and adds new attributes with new values. All arguments are lists with the format:

    attr1 {val11 val12 ...} attr2 {val21...} ...

where each value list may be empty for deleting all attributes. The optional arguments default to empty lists of attributes to delete and to add.

The command blocks until all modifications have completed. Its result is the empty string.

::ldap::add handle dn attrValueTuples

This command creates a new object using the specified dn. The attributes of the new object are set to the values in the list attrValueTuples. Multiple valuated attributes may be specified using multiple tuples. The command blocks until the operation has completed. Its result is the empty string.

::ldap::addMulti handle dn attrValueTuples

This command is the preferred one to create a new object using the specified dn. The attributes of the new object are set to the values in the dictionary attrValueTuples (which is keyed by the attribute names). Each tuple is a list containing multiple values. The command blocks until the operation has completed. Its result is the empty string.

::ldap::delete handle dn

This command removes the object specified by dn, and all its attributes from the server. The command blocks until the operation has completed. Its result is the empty string.

::ldap::modifyDN handle dn newrdn ?deleteOld? ?newSuperior?

This command moves or copies the object specified by dn to a new location in the tree of object. This location is specified by newrdn, a relative designation, or by newrdn and newSuperior, a absolute designation. The optional argument deleteOld defaults to true, i.e. a move operation. If deleteOld is not set, then the operation will create a copy of dn in the new location. The optional argument newSuperior defaults an empty string, meaning that the object must not be relocated in another branch of the tree. If this argument is given, the argument deleteOld must be specified also. The command blocks until the operation has completed. Its result is the empty string.

::ldap::info ip handle

This command returns the IP address of the remote LDAP server the handle is connected to.

::ldap::info bound handle

This command returns 1 if a handle has successfully completed a ::ldap::bind. If no bind was done or it failed, a 0 is returned.

::ldap::info bounduser handle

This command returns the username used in the bind operation if a handle has successfully completed a ::ldap::bind. If no bound was done or it failed, an empty string is returned.

::ldap::info connections

This command returns all currently existing ldap connection handles.

::ldap::info tls handle

This command returns 1 if the ldap connection handle used TLS/SSL for connection via ldap::secure_connect or completed ldap::starttls, 0 otherwise.

::ldap::info tlsstatus handle

This command returns the current security status of an TLS secured channel. The result is a list of key-value pairs describing the connected peer (see the TLS package documentation for the returned values). If the connection is not secured with TLS, an empty list is returned.

::ldap::info saslmechanisms handle

Return the supported SASL mechanisms advertised by the server. Only valid in a bound state (anonymous or other).

::ldap::info control handle

Return the supported controls advertised by the server as a list of OIDs. Only valid in a bound state. This is currently experimental and subject to change.

::ldap::info extensions extensions

Returns the supported LDAP extensions as list of OIDs. Only valid in a bound state. This is currently experimental and subject to change.

::ldap::info whoami handle

Returns authzId for the current connection. This implements the RFC 4532 protocol extension.

EXAMPLES¶

A small example, extracted from the test application coming with this code.

    package require ldap


    # Connect, bind, add a new object, modify it in various ways


    set handle [ldap::connect localhost 9009]


    set dn "cn=Manager, o=University of Michigan, c=US"


    set pw secret


    ldap::bind $handle $dn $pw


    set dn "cn=Test User,ou=People,o=University of Michigan,c=US"


    ldap::add $handle $dn {
	objectClass     OpenLDAPperson
	cn              {Test User}
	mail            test.user@google.com
	uid             testuid
	sn              User
	telephoneNumber +31415926535
	telephoneNumber +27182818285


    }


    set dn "cn=Another User,ou=People,o=University of Michigan,c=US"


    ldap::addMulti $handle $dn {
	objectClass     {OpenLDAPperson}
	cn              {{Anotther User}}
	mail            {test.user@google.com}
	uid             {testuid}
	sn              {User}
	telephoneNumber {+31415926535 +27182818285}


    }


    # Replace all attributes


    ldap::modify $handle $dn [list drink icetea uid JOLO]


    # Add some more


    ldap::modify $handle $dn {} {} [list drink water  drink orangeJuice pager "+1 313 555 7671"]


    # Delete


    ldap::modify $handle $dn {} [list drink water  pager ""]


    # Move


    ldap::modifyDN $handle $dn "cn=Tester"


    # Kill the test object, and shut the connection down.


    set dn "cn=Tester,ou=People,o=University of Michigan,c=US"


    ldap::delete $handle $dn


    ldap::unbind     $handle


    ldap::disconnect $handle

And another example, a simple query, and processing the results.

    package require ldap


    set handle [ldap::connect ldap.acme.com 389]


    ldap::bind $handle


    set results [ldap::search $handle "o=acme,dc=com" "(uid=jdoe)" {}]


    foreach result $results {
	foreach {object attributes} $result break
	# The processing here is similar to what 'parray' does.
	# I.e. finding the longest attribute name and then
	# generating properly aligned output listing all attributes
	# and their values.
	set width 0
	set sortedAttribs {}
	foreach {type values} $attributes {
	    if {[string length $type] > $width} {
		set width [string length $type]
	    }
	    lappend sortedAttribs [list $type $values]
	}
	puts "object='$object'"
	foreach sortedAttrib  $sortedAttribs {
	    foreach {type values} $sortedAttrib break
	    foreach value $values {
		regsub -all "\[\x01-\x1f\]" $value ? value
		puts [format "  %-${width}s %s" $type $value]
	    }
	}
	puts ""


    }


    ldap::unbind $handle


    ldap::disconnect $handle

BUGS, IDEAS, FEEDBACK¶

This document, and the package it describes, will undoubtedly contain bugs and other problems. Please report such in the category ldap of the Tcllib Trackers [http://core.tcl.tk/tcllib/reportlist]. Please also report any ideas for enhancements you may have for either package and/or documentation.

When proposing code changes, please provide unified diffs, i.e the output of diff -u.

Note further that attachments are strongly preferred over inlined patches. Attachments can be made by going to the Edit form of the ticket immediately after its creation, and then using the left-most button in the secondary navigation bar.

KEYWORDS¶

directory access, internet, ldap, ldap client, protocol, rfc 2251, rfc 4511, x.500

CATEGORY¶

Networking

COPYRIGHT¶

Copyright (c) 2004 Andreas Kupries <andreas_kupries@users.sourceforge.net>
Copyright (c) 2004 Jochen Loewer <loewerj@web.de>
Copyright (c) 2006 Michael Schlenker <mic42@users.sourceforge.net>