1. Manuals
  2. Tumbleweed
  3. rygel
  4. rygel.conf(5)

Scroll to navigation

RYGEL.CONF(5) Rygel User Manual RYGEL.CONF(5)

NAME

rygel.conf - Rygel configuration file

SYNOPSIS

$XDG_CONFIG_DIR/rygel.conf

/etc/rygel.conf

DESCRIPTION

rygel reads its configuration values from the file $XDG_CONFIG_DIR/rygel.conf or a file given on command line with the --config option. If that file does not exist it uses the file /etc/rygel.conf.

Most of the options may be overriden by commandline arguments or envronment variables. See rygel(1) for details on those.

GENERAL DIRECTIVES

Lists in the configuration files are separated by a semicolon (;). Boolean values may be either true or false.

ipv6

Set to false to disable binding to IPv6 addresses

interface=INTERFACE

Semicolon separated list separated of the network interfaces rygel should listen on. May be an IP, an interface name or on Linux even the ESSID of a wireless network.

port=PORT

Set the listen-port.

enable-transcoding

Set to true to enable transcoding in general.

log-level=DOMAIN:LEVEL[,DOMAIN:LEVEL,...]

Comma-separated list of DOMAIN:LEVEL pairs, allowing to set the log level individually for each domain, where DOMAIN is eiher "*", "rygel" or the name of a plugin. Allowed log levels are 1=error, 2=critical, 3=warning, 4=message/info, 5=debug. Note that on recent versions of GLib (>= 2.36) it is required to set the environment variable G_MESSAGES_DEBUG to all to get any debug output.

plugin-path=PATH

Set the plugin search path.

engine-path=PATH

Set the engine search path.

media-engine=ENGINE

Name of the loadable module to use as media engine back-end.

allow-upload

Allow uploading of media files via UPnP.

allow-deletion

Allow remote media file deletion via UPnP.

video-upload-folder

If allow-upload is true, use this folder to store uploaded videos. It defaults to @VIDEOS@ which expands to the default directory for video files (usually $HOME/Videos).

music-upload-folder

If allow-upload is true, use this folder to store uploaded music files. It defaults to @MUSIC@ which expands to the default directory for music files (usually $HOME/Music).

picture-upload-folder

If allow-upload is true, use this folder to store uploaded pictures. It defaults to @PICTURES@ which expands to the default directory for picture files (usually $HOME/Pictures).

force-downgrade-for

Semicolon-separated list of device user-agents (or parts thereof) which need a forced downgrade to MediaServer:1 and/or ContentDirectory:1.


Warning
Only use this parameter if you know what your're doing or are being told to do so; overriding the default value might cause incompatibilites. If you find that adding your device here enables its usage with Rygel, please file an IOP bug[1] so we can include it into the default configuration.

acl-fallback-policy

This is the default policy that is used if no access control provider is found on the D-Bus. Use true to allow access from every peer, false to deny all access. If it is not specified, the default fall-back policy is true.

strict-dlna

Disabled by default. Use true to disable a set of features that improve compatibility with many clients, but break standard conformance

DATABASE SETTINGS

The settings in the [Database]section are for the database support library.

debug

Set to true to show the SQL statements used.

GSTREAMER MEDIA ENGINE SETTINGS

The settings in the [GstMediaEngine] section are specific to the GStreamer media engine, which is the default media engine. See the media-engine setting. These following options are available for the GStreamer[2] media engine.

transcoders

A semicolon-separated list of the active transcoders. This setting has no effect if enable-transcoding is set to false. Possible values are: lpcm,mp3,mp2ts,aac,avc or wmv. Its default value is lpcm;mp3;mp2ts;aac;wmv.

PLUGIN-SPECIFIC SETTINGS

Sections for plugins are denoted with [PluginName] and can contain options specific to a plugin (see below) as well these common options:

title=TITLE

Title of the device implemented by this plugin. There are some variables which will be replaced by rygel. @REALNAME@ will be subsituted by the user's real name, @USERNAME@ by the user's login id and @HOSTNAME@ by the name of the machine rygel runs on.

enabled

You can individually enable or disable plugins by setting this to true or false.

energy-management

Set to true to if you would like the UPnP device to contain a EnergyManagement service. Note that additional configuration is required, see EnergyManagement settings.

diagnostics

Set to true if you would like the UPnP device to contain a BasicManagement:2 service that allows running tools like ping, nslookup and traceroute remotely.

server-name

A string that will be sent as the "Server:" header in a HTTP response.

ENERGYMANAGEMENT SETTINGS

The settings in [EnergyManagement-IFACENAME] sections specify the settings that relate to EnergyManagement services on this interface. Example: [EnergyManagement-eth0].

mode-on-suspend

The NetworkInterfaceMode that should be used when suspended. Default is "Unimplemented", other valid values are "IP-up-Periodic”, "IP-down-no-Wake", "IP-down-with-WakeOn", "IP-down-with-WakeAuto", "IP-down-with-WakeOnAuto".

supported-transport

Optional WakeSupportedTransport that the service should advertize. Valid values are "UDP-Broadcast", "UDP-Unicast", "TCP-Unicast", "Other".

password

Optional hexadecimal password that will be used to build the WakeOnPattern.

TRACKER PLUGIN

The tracker plugin uses the centralized database of meta information from the tracker project. See the tracker project website[3] for more information about tracker.

share-pictures

Enable or disable sharing of all pictures in the Tracker database.

share-videos

Enable or disable sharing of all videos in the Tracker database.

share-music

Enable or disable sharing of all music in the Tracker database.

MEDIAEXPORT PLUGIN

The MediaExport plugin is an alternative to the tracker-backed media export. It extracts meta-data by itself and stores it in a SQLite[4] database in $XDG_CACHE_DIR/rygel/media-export.db on UNIX platforms.


Note

If both plugins, Tracker as well as MediaExport are enabled, MediaExport will disable itself in favour of the Tracker plugin.

There are several options supported by this plugin:

uris

A list of URIS to expose via UPnP. May be files, folders or anything supported by GVFS. If left emtpy it defaults to export the user's music, video and picture folders as defined per XDG special user directories spec. These default folders can be referenced by @MUSIC@, @PICTURES@ and @VIDEOS@. Locations can be entered as either fully escaped URIS or normal paths.


Note
If you enter a normal path that contains whitespace there is no need to escape them with either a backslash or putting the string in quotes.


Note
It is strongly advised against using an exported folder as a target for downloads when extract-metadata is enabled. Rygel will most likely ignore the files then because they will fail to extract.

Example 1. Possible values for uris

uris=@MUSIC@;/home/user/My Pictures;file:///home/user/My%20Videos

extract-metadata

Set to false if you do not care about duration or any other meta-data like artist. This speeds up the initial crawl of the media a lot. Use it to quickly share some files via UPnP. Make sure to define an include-filter, otherwise you will end up with a lot of files exposed which the client cannot display anyway.

monitor-changes

Set to false if you don't want to have new files picked up automatically by rygel.

monitor-grace-timeout

Time in seconds to wait after a new file has been detected before trying to extract meta-data from it. Useful if you're downloading to a directory watched by rygel. Default is 5 seconds.

virtual-folders

Set to false if you don't need the virtual folder hierarchy.

PLAYBIN PLUGIN

The Playbin plugin implements a media renderer (Digtal Media Renderer, DMR in DLNA terms). This plugin was known as GstRenderer.

It is highly recommended to leave the sink choice to playbin. If, however, the default choices don't work for you they can be reconfigured as follows

audio-sink

Definition of the audio sink to use. Can be a single element or a partial pipeline definition in gst-launch's syntax

video-sink

Definition of the video sink to use. Can be a single element or a partial pipeline definition in gst-launch's syntax

LIGHTMEDIASCANNER PLUGIN

The LightMediaScanner plugin exports the contents of the lightmediascanner daemon[5]

This plugin does not have any special options.

GSTLAUNCH PLUGIN

The GstLaunch plugin allows to expose GStreamer pipelines using the same syntax as the gst-launch utilty. You can configure several items in this plugins.

launch-items

A list of of identifiers for the pipelines to be exposed.

identifier-title

Title of the device represented by this pipeline. Identifier is the identifier as set in launch-items

identifier-mime

Mime-type of the pipeline.

identifier-launch

Definition of the pipeline in gst-launch syntax. For some examples on writing pipelines see gst-launch(1).

identifier-dlnaprofile

DLNA profile for the stream.

An example configuration is available in the distributed configuration file /etc/rygel.conf.

EXTERNAL

The External plugin is an consumer of the MediaServer2 DBus interface specification[6]. This allows external programs to share their data via UPnP by implementing this DBus specification. The plugin picks up any implementation of this interface on the session bus and exposes the presented media via UPnP. Known implementors of this spec are gnome-dvb-daemon[7], Rhythmbox[8] and Grilo[9] via the grilo-ms2 project.

You can disable the whole functionality by setting enabled=false in the [External] section of the configuration file.

Individual peers may be enabled or disabled by creating sections corresponding to the D-Bus names of the peer:

[org.gnome.UPnP.MediaServer2.Rhythmbox]
enabled=false

This plugin has no additional options.

MPRIS

The MPRIS plugin is a consumer of the MPRIS2 DBus interface specification[10]. The implementation conforms to version 2.0 of the standard.

rygel exposes media players that implement the provider side of this DBus specification as DLNA Digital Media Renderers (DMR) similar to the Playbin plugin. This means that you can easily turn your media player into a DMR by implementing this DBus specification.

Players that implement this spec and are known to work with rygel are Banshee[11], Rhythmbox[8] and GNOME Videos (previously known as Totem)[12]

You can disable the whole functionality by setting enabled=false in the [MRPIS] section of the configuration file.

The configuration of this plugin is special. Plugin configuration is not done on the plugin but rather per peer that is found providing the MPRIS2 interface. See the following example to set the title for Banshee on MPRIS:

[org.mpris.MediaPlayer2.banshee]
title=@REALNAME@'s Banshee on @HOSTNAME@

This plugin has no additional options.

SEE ALSO

rygel(1), gst-launch(1)

AUTHOR

Jens Georg <mail@jensge.org>

Wrote this manpage.

NOTES

1.
file an IOP bug
https://gitlab.gnome.org/GNOME/rygel/issues/new/?issuable_template=IOP
2.
GStreamer
http://gstreamer.freedesktop.org
3.
tracker project website
https://wiki.gnome.org/Projects/Tracker
4.
SQLite
http://sqlite.org
5.
lightmediascanner daemon
https://github.com/profusion/lightmediascanner
6.
MediaServer2 DBus interface specification
https://wiki.gnome.org/Projects/Rygel/MediaServer2Spec
7.
gnome-dvb-daemon
https://wiki.gnome.org/Projects/DVBDaemon
8.
Rhythmbox
http://www.rhythmbox.org
9.
Grilo
https://wiki.gnome.org/Projects/Grilo
10.
MPRIS2 DBus interface specification
https://specifications.freedesktop.org/mpris-spec/latest/
11.
Banshee
http://banshee.fm
12.
GNOME Videos (previously known as Totem)
https://wiki.gnome.org/Apps/Videos
10/12/2024 rygel