User Contributed Perl Documentation

NAME¶

Inline - Write Perl Subroutines in Other Programming Languages

VERSION¶

This document describes Inline version 0.86.

SYNOPSIS¶

    use Inline C;
    print "9 + 16 = ", add(9, 16), "\n";
    print "9 - 16 = ", subtract(9, 16), "\n";
    __END__
    __C__
    int add(int x, int y) {
      return x + y;
    }
    int subtract(int x, int y) {
      return x - y;
    }

DESCRIPTION¶

The Inline module allows you to put source code from other programming languages directly "inline" in a Perl script or module. The code is automatically compiled as needed, and then loaded for immediate access from Perl.

Inline saves you from the hassle of having to write and compile your own glue code using facilities like XS or SWIG. Simply type the code where you want it and run your Perl as normal. All the hairy details are handled for you. The compilation and installation of your code chunks all happen transparently; all you will notice is the delay of compilation on the first run.

The Inline code only gets compiled the first time you run it (or whenever it is modified) so you only take the performance hit once. Code that is Inlined into distributed modules (like on the CPAN) will get compiled when the module is installed, so the end user will never notice the compilation time.

Best of all, it works the same on both Unix and Microsoft Windows. See Inline- Support for support information.

Why Inline?¶

Do you want to know "Why would I use other languages in Perl?" or "Why should I use Inline to do it?"? I'll try to answer both.

Why would I use other languages in Perl?

The most obvious reason is performance. For an interpreted language, Perl is very fast. Many people will say "Anything Perl can do, C can do faster". (They never mention the development time :-) Anyway, you may be able to remove a bottleneck in your Perl code by using another language, without having to write the entire program in that language. This keeps your overall development time down, because you're using Perl for all of the non-critical code.

Another reason is to access functionality from existing API-s that use the language. Some of this code may only be available in binary form. But by creating small subroutines in the native language, you can "glue" existing libraries to your Perl. As a user of the CPAN, you know that code reuse is a good thing. So why throw away those Fortran libraries just yet?

If you are using Inline with the C language, then you can access the full internals of Perl itself. This opens up the floodgates to both extreme power and peril.

Maybe the best reason is "Because you want to!". Diversity keeps the world interesting. TMTOWTDI!

Why should I use Inline to do it?

There are already two major facilities for extending Perl with C. They are XS and SWIG. Both are similar in their capabilities, at least as far as Perl is concerned. And both of them are quite difficult to learn compared to Inline.

There is a big fat learning curve involved with setting up and using the XS environment. You need to get quite intimate with the following docs:

perlxs
perlxstut
perlapi
perlguts
perlmod
h2xs
xsubpp
ExtUtils::MakeMaker

With Inline you can be up and running in minutes. There is a C Cookbook with lots of short but complete programs that you can extend to your real-life problems. No need to learn about the complicated build process going on in the background. You don't even need to compile the code yourself. Inline takes care of every last detail except writing the C code.

Perl programmers cannot be bothered with silly things like compiling. "Tweak, Run, Tweak, Run" is our way of life. Inline does all the dirty work for you.

Another advantage of Inline is that you can use it directly in a script. You can even use it in a Perl one-liner. With XS and SWIG, you always set up an entirely separate module. Even if you only have one or two functions. Inline makes easy things easy, and hard things possible. Just like Perl.

Finally, Inline supports several programming languages (not just C and C++). As of this writing, Inline has support for C, C++, Java, Python, Ruby, Tcl, Assembler, Basic, Guile, Befunge, Octave, Awk, BC, TT (Template Toolkit), WebChat and even PERL. New Inline Language Support Modules (ILSMs) are regularly being added. See Inline-API for details on how to create your own ILSM.

USING THE INLINE.PM MODULE¶

Inline is a little bit different than most of the Perl modules that you are used to. It doesn't import any functions into your namespace and it doesn't have any object oriented methods. Its entire interface (with two minor exceptions) is specified through the 'use Inline ...' command.

This section will explain all of the different ways to "use Inline". If you want to begin using C with Inline immediately, see Inline::C-Cookbook.

The Basics¶

The most basic form for using Inline is:

    use Inline X => "X source code";

where 'X' is one of the supported Inline programming languages. The second parameter identifies the source code that you want to bind to Perl. The source code can be specified using any of the following syntaxes:

The DATA Keyword.

    use Inline Java => 'DATA';
    # Perl code goes here ...
    __DATA__
    __Java__
    /* Java code goes here ... */

The easiest and most visually clean way to specify your source code in an Inline Perl program is to use the special "DATA" keyword. This tells Inline to look for a special marker in your "DATA" filehandle's input stream. In this example the special marker is "__Java__", which is the programming language surrounded by double underscores.

In case you've forgotten, the "DATA" pseudo file is comprised of all the text after the "__END__" or "__DATA__" section of your program. If you're working outside the "main" package, you'd best use the "__DATA__" marker or else Inline will not find your code.

Using this scheme keeps your Perl code at the top, and all the ugly Java stuff down below where it belongs. This is visually clean and makes for more maintainable code. An excellent side benefit is that you don't have to escape any characters like you might in a Perl string. The source code is verbatim. For these reasons, I prefer this method the most.

The only problem with this style is that since Perl can't read the "DATA" filehandle until runtime, it obviously can't bind your functions until runtime. The net effect of this is that you can't use your Inline functions as barewords (without predeclaring them) because Perl has no idea they exist during compile time.

The FILE and BELOW keywords.

    use Inline::Files;
    use Inline Java => 'file';
    # Perl code goes here ...
    __JAVA__
    /* Java code goes here ... */

This is the newest method of specifying your source code. It makes use of the Perl module "Inline::Files" written by Damian Conway. The basic style and meaning are the same as for the "DATA" keyword, but there are a few syntactic and semantic twists.

First, you must say 'use Inline::Files' before you 'use Inline' code that needs those files. The special '"DATA"' keyword is replaced by either '"file"' or '"below"'. This allows for the bad pun idiom of:

    use Inline C => 'below';

You can omit the "__DATA__" tag now. Inline::Files is a source filter that will remove these sections from your program before Perl compiles it. They are then available for Inline to make use of. And since this can all be done at compile time, you don't have to worry about the caveats of the 'DATA' keyword.

This module has a couple small gotchas. Since Inline::Files only recognizes file markers with capital letters, you must specify the capital form of your language name. Also, there is a startup time penalty for using a source code filter.

At this point Inline::Files is alpha software and use of it is experimental. Inline's integration of this module is also fledgling at the time being. One of things I plan to do with Inline::Files is to get line number info so when an extension doesn't compile, the error messages will point to the correct source file and line number.

My best advice is to use Inline::Files for testing (especially as support for it improves), but use DATA for production and distributed/CPAN code.

Strings

    use Inline Java => <<'END';
    /* Java code goes here ... */
    END
    # Perl code goes here ...

You also just specify the source code as a single string. A handy way to write the string is to use Perl's "here document" style of quoting. This is ok for small functions but can get unwieldy in the large. On the other hand, the string variant probably has the least startup penalty and all functions are bound at compile time.

If you wish to put the string into a scalar variable, please be aware that the "use" statement is a compile time directive. As such, all the variables it uses must also be set at compile time, "before" the 'use Inline' statement. Here is one way to do it:

    my $code;
    BEGIN {
        $code = <<END;
    /* Java code goes here ... */
    END
    }
    use Inline Java => $code;
    # Perl code goes here ...

The bind() Function

An alternative to using the BEGIN block method is to specify the source code at run time using the 'Inline->bind()' method. (This is one of the interface exceptions mentioned above) The bind() method takes the same arguments as 'use Inline ...'.

    my $code = <<END;
    /* Java code goes here ... */
    END
    Inline->bind(Java => $code);

You can think of bind() as a way to eval() code in other programming languages.

Although bind() is a powerful feature, it is not recommended for use in Inline based modules. In fact, it won't work at all for installable modules. See instructions below for creating modules with Inline.

Other Methods

The source code for Inline can also be specified as an external filename, a reference to a subroutine that returns source code, or a reference to an array that contains lines of source code. (Note that if the external source file is in the current directory it must be specified with a leading '.' - ie '.file.ext' instead of simply 'file.ext'.) These methods are less frequently used but may be useful in some situations.

For instance, to load your C++ code from a file named the same as your perl module with a swapped file extension, you can use:

    use Inline CPP => (__FILE__ =~ s/\.pm$/.cpp/r);

Shorthand

If you are using the 'DATA' or 'file' methods described above and there are no extra parameters, you can omit the keyword altogether. For example:

    use Inline 'Java';
    # Perl code goes here ...
    __DATA__
    __Java__
    /* Java code goes here ... */

    use Inline::Files;
    use Inline 'Java';
    # Perl code goes here ...
    __JAVA__
    /* Java code goes here ... */

More about the DATA Section¶

If you are writing a module, you can also use the DATA section for POD and AutoLoader subroutines. Just be sure to put them before the first Inline marker. If you install the helper module "Inline::Filters", you can even use POD inside your Inline code. You just have to specify a filter to strip it out.

You can also specify multiple Inline sections, possibly in different programming languages. Here is another example:

    # The module Foo.pm
    package Foo;
    use AutoLoader;
    use Inline C;
    use Inline C => DATA => filters => 'Strip_POD';
    use Inline Python;
    1;
    __DATA__
    sub marine {
        # This is an autoloaded subroutine
    }
    =head1 External subroutines
    =cut
    __C__
    /* First C section */
    __C__
    /* Second C section */
    =head1 My C Function
    Some POD doc.
    =cut
    __Python__
    """A Python Section"""

An important thing to remember is that you need to have one "use Inline Foo => 'DATA'" for each "__Foo__" marker, and they must be in the same order. This allows you to apply different configuration options to each section.

Configuration Options¶

Inline tries to do the right thing as often as possible. But sometimes you may need to override the default actions. This is easy to do. Simply list the Inline configuration options after the regular Inline parameters. All configuration options are specified as (key, value) pairs.

    use Inline (C => 'DATA',
                directory => './inline_dir',
                libs => '-lfoo',
                inc => '-I/foo/include',
                prefix => 'XXX_',
                warnings => 0,
               );

You can also specify the configuration options on a separate Inline call like this:

    use Inline (C => Config =>
                directory => './inline_dir',
                libs => '-lfoo',
                inc => '-I/foo/include',
                prefix => 'XXX_',
                warnings => 0,
               );
    use Inline C => <<'END_OF_C_CODE';

The special keyword 'Config' tells Inline that this is a configuration-only call. No source code will be compiled or bound to Perl.

If you want to specify global configuration options that don't apply to a particular language, just leave the language out of the call. Like this:

    use Inline Config => warnings => 0;

The Config options are inherited and additive. You can use as many Config calls as you want. And you can apply different options to different code sections. When a source code section is passed in, Inline will apply whichever options have been specified up to that point. Here is a complex configuration example:

    use Inline (Config =>
                directory => './inline_dir',
               );
    use Inline (C => Config =>
                libs => '-lglobal',
               );
    use Inline (C => 'DATA',         # First C Section
                libs => ['-llocal1', '-llocal2'],
               );
    use Inline (Config =>
                warnings => 0,
               );
    use Inline (Python => 'DATA',    # First Python Section
                libs => '-lmypython1',
               );
    use Inline (C => 'DATA',         # Second C Section
                libs => [undef, '-llocal3'],
               );

The first "Config" applies to all subsequent calls. The second "Config" applies to all subsequent "C" sections (but not "Python" sections). In the first "C" section, the external libraries "global", "local1" and "local2" are used. (Most options allow either string or array ref forms, and do the right thing.) The "Python" section does not use the "global" library, but does use the same "DIRECTORY", and has warnings turned off. The second "C" section only uses the "local3" library. That's because a value of "undef" resets the additive behavior.

The "directory" and "warnings" options are generic Inline options. All other options are language specific. To find out what the "C" options do, see "Inline::C".

On and Off¶

If a particular config option has value options of 1 and 0, you can use the 'enable' and 'disable' modifiers. In other words, this:

    use Inline Config =>
               force_build => 1,
               clean_after_build => 0;

could be reworded as:

    use Inline Config =>
               enable => force_build =>
               disable => clean_after_build;

Playing 'with' Others¶

Inline has a special configuration syntax that tells it to get more configuration options from other Perl modules. Here is an example:

    use Inline with => 'Event';

This tells Inline to load the module "Event.pm" and ask it for configuration information. Since "Event" has a C API of its own, it can pass Inline all of the information it needs to be able to use "Event" C callbacks seamlessly.

That means that you don't need to specify the typemaps, shared libraries, include files and other information required to get this to work.

You can specify a single module or a list of them. Like:

    use Inline with => qw(Event Foo Bar);

Currently, modules that works with Inline include "Event", "PDL", and those that use "Alien::Build".

In order to make your module work with Inline in this way, your module needs to provide a class method called "Inline" that takes an Inline language as a parameter (e.g. "C"), and returns a reference to a hash with configuration information that is acceptable to the relevant ILSM. For C, see C Configuration Options. E.g.:

    my $confighashref = Event->Inline('C'); # only supports C in 1.21
    # hashref contains keys INC, TYPEMAPS, MYEXTLIB, AUTO_INCLUDE, BOOT

If your module uses ExtUtils::Depends version 0.400 or higher, your module only needs this:

    package Module;
    use autouse Module::Install::Files => qw(Inline);

Inline Shortcuts¶

Inline lets you set many configuration options from the command line. These options are called 'shortcuts'. They can be very handy, especially when you only want to set the options temporarily, for say, debugging.

For instance, to get some general information about your Inline code in the script "Foo.pl", use the command:

    perl -MInline=info Foo.pl

If you want to force your code to compile, even if its already done, use:

    perl -MInline=force Foo.pl

If you want to do both, use:

    perl -MInline=info -MInline=force Foo.pl

or better yet:

    perl -MInline=info,force Foo.pl

The Inline 'directory'¶

Inline needs a place to build your code and to install the results of the build. It uses a single directory named '.Inline/' under normal circumstances. If you create this directory in your home directory, the current directory or in the directory where your program resides, Inline will find and use it. You can also specify it in the environment variable "PERL_INLINE_DIRECTORY" or directly in your program, by using the "directory" keyword option. If Inline cannot find the directory in any of these places it will create a '_Inline/' directory in either your current directory or the directory where your script resides.

One of the key factors to using Inline successfully, is understanding this directory. When developing code it is usually best to create this directory (or let Inline do it) in your current directory. Remember that there is nothing sacred about this directory except that it holds your compiled code. Feel free to delete it at any time. Inline will simply start from scratch and recompile your code on the next run. If you have several programs that you want to force to recompile, just delete your '.Inline/' directory.

It is probably best to have a separate '.Inline/' directory for each project that you are working on. You may want to keep stable code in the <.Inline/> in your home directory. On multi-user systems, each user should have their own '.Inline/' directories. It could be a security risk to put the directory in a shared place like "/tmp/".

Debugging Inline Errors¶

All programmers make mistakes. When you make a mistake with Inline, like writing bad C code, you'll get a big error report on your screen. This report tells you where to look to do the debugging. Some languages may also dump out the error messages generated from the build.

When Inline needs to build something it creates a subdirectory under your "DIRECTORY/build/" directory. This is where it writes all the components it needs to build your extension. Things like XS files, Makefiles and output log files.

If everything goes OK, Inline will delete this subdirectory. If there is an error, Inline will leave the directory intact and print its location. The idea is that you are supposed to go into that directory and figure out what happened.

Read the doc for your particular Inline Language Support Module for more information.

The 'config' Registry File¶

Inline keeps a cached file of all of the Inline Language Support Module's meta data in a file called "config". This file can be found in your "directory" directory. If the file does not exist, Inline creates a new one. It will search your system for any module beginning with "Inline::". It will then call that module's register() method to get useful information for future invocations.

Whenever you add a new ILSM, you should delete this file so that Inline will auto-discover your newly installed language module. (This should no longer be necessary as of Inline-0.49.)

CONFIGURATION OPTIONS¶

This section lists all of the generic Inline configuration options. For language specific configuration, see the doc for that language.

"directory"

The "directory" config option is the directory that Inline uses to both build and install an extension.

Normally Inline will search in a bunch of known places for a directory called '.Inline/'. Failing that, it will create a directory called '_Inline/'

If you want to specify your own directory, use this configuration option.

Note that you must create the "directory" directory yourself. Inline will not do it for you.

"name"

You can use this option to set the name of your Inline extension object module. For example:

    use Inline C => 'DATA',
               name => 'Foo::Bar';

would cause your C code to be compiled in to the object:

    lib/auto/Foo/Bar/Bar.so
    lib/auto/Foo/Bar/Bar.inl

(The .inl component contains dependency information to make sure the source code is in sync with the executable)

If you don't use "name", Inline will pick a name for you based on your program name or package name. In this case, Inline will also enable the "autoname" option which mangles in a small piece of the MD5 fingerprint into your object name, to make it unique.

"autoname"

This option is enabled whenever the "name" parameter is not specified. To disable it say:

    use Inline C => 'DATA',
               disable => 'autoname';

"autoname" mangles in enough of the MD5 fingerprint to make your module name unique. Objects created with "autoname" will never get replaced. That also means they will never get cleaned up automatically.

"autoname" is very useful for small throw away scripts. For more serious things, always use the "name" option.

"version"

Specifies the version number of the Inline extension object. It is used only for modules, and it must match the global variable $VERSION. Additionally, this option should used if (and only if) a module is being set up to be installed permanently into the Perl sitelib tree using Inline::MakeMaker (NOT used by Inline::Module). Inline will croak if you use it otherwise.

The presence of the "version" parameter is the official way to let Inline know that your code is an installable/installed module. Inline will never generate an object in the temporary cache ("_Inline/" directory) if "version" is set. It will also never try to recompile a module that was installed into someone's Perl site tree.

So the basic rule is develop without "version", and deliver with "version".

"with"

"with" can also be used as a configuration option instead of using the special 'with' syntax. Do this if you want to use different sections of Inline code with different modules. (Probably a very rare usage)

    use Event;
    use Inline C => DATA => with => 'Event';

Modules specified using the config form of "with" will not be automatically required. You must "use" them yourself.

"using"

You can override modules that get used by ILSMs with the "using" option. This is typically used to override the default parser for Inline::C, but might be used by any ILSM for any purpose.

    use Inline config => using => '::Parser::RecDescent';
    use Inline C => '...';

This would tell Inline::C to use Inline::C::Parser::RecDescent.

"global_load"

This option is for compiled languages only. It tells Inline to tell DynaLoader to load an object file in such a way that its symbols can be dynamically resolved by other object files. May not work on all platforms. See the "global" shortcut below.

"untaint"

You can use this option whenever you use Perl's "-T" switch, for taint checking. This option tells Inline to blindly untaint all tainted variables. (This is generally considered to be an appallingly insecure thing to do, and not to be recommended - but the option is there for you to use if you want. Please consider using something other than Inline for scripts that need taint checking.) It also turns on "safemode" by default. See the "untaint" shortcut below. You will see warnings about blindly untainting fields in both %ENV and Inline objects. If you want to silence these warnings, set the Config option "no_untaint_warn" => 1. There can be some problems untainting Inline scripts where older versions of Cwd, such as those that shipped with early versions of perl-5.8 (and earlier), are installed. Updating Cwd will probably solve these problems.

safemode

Perform extra safety checking, in an attempt to thwart malicious code. This option cannot guarantee security, but it does turn on all the currently implemented checks. (Currently, the only "currently implemented check" is to ensure that the "directory" option has also been used.)

There is a slight startup penalty by using "safemode". Also, using "untaint" automatically turns this option on. If you need your code to start faster under "-T" (taint) checking, you'll need to turn this option off manually. Only do this if you are not worried about security risks. See the "unsafe" shortcut below.

"force_build"

Makes Inline build (compile) the source code every time the program is run. The default is 0. See the "force" shortcut below.

"build_noisy"

Tells ILSMs that they should dump build messages to the terminal rather than be silent about all the build details.

"build_timers"

Tells ILSMs to print timing information about how long each build phase took. Usually requires "Time::HiRes".

"clean_after_build"

Tells Inline to clean up the current build area if the build was successful. Sometimes you want to "disable" this for debugging. Default is 1. See the "noclean" shortcut below.

"clean_build_area"

Tells Inline to clean up the old build areas within the entire Inline "directory". Default is 0. See the "clean" shortcut below.

"print_info"

Tells Inline to print various information about the source code. Default is 0. See the "info" shortcut below.

"print_version"

Tells Inline to print version info about itself. Default is 0. See the "version" shortcut below.

"reportbug"

Puts Inline into 'reportbug' mode, which is what you want if you desire to report a bug.

"rewrite_config_file"

Default is 0, but setting "rewrite_config_file => 1" will mean that the existing configuration file in the Inline "directory" will be overwritten. (This is useful if the existing config file is not up to date as regards supported languages.)

"warnings"

This option tells Inline whether to print certain warnings. Default is 1.

INLINE CONFIGURATION SHORTCUTS¶

This is a list of all the shortcut configuration options currently available for Inline. Specify them from the command line when running Inline scripts.

    perl -MInline=noclean inline_script.pl

    perl -MInline=info,force,noclean inline_script.pl

You can specify multiple shortcuts separated by commas. They are not case sensitive. You can also specify shortcuts inside the Inline program like this:

    use Inline 'info', 'force', 'noclean';

NOTE: If a 'use Inline' statement is used to set shortcuts, it can not be
used for additional purposes.

"clean": Tells Inline to remove any build directories that may be lying around in your build area. Normally these directories get removed immediately after a successful build. Exceptions are when the build fails, or when you use the "noclean" or "reportbug" options.
"force": Forces the code to be recompiled, even if everything is up to date.
"global": Turns on the "global_load" option.
"info": This is a very useful option when you want to know what's going on under the hood. It tells Inline to print helpful information to "STDERR". Among the things that get printed is a list of which Inline functions were successfully bound to Perl.
"noclean": Tells Inline to leave the build files after compiling.
"noisy": Use the "build_noisy" option to print messages during a build.
"reportbug": Puts Inline into "reportbug" mode, which does special processing when you want to report a bug. "reportbug" also automatically forces a build, and doesn't clean up afterwards. This is so that you can tar and mail the build directory to me. "reportbug" will print exact instructions on what to do. Please read and follow them carefully.
NOTE: "reportbug" informs you to use the tar command. If your system does not
have tar, please use the equivalent "zip" command.
"safe": Turns "safemode" on. "untaint" will turn this on automatically. While this mode performs extra security checking, it does not guarantee safety.
"site_install": This parameter used to be used for creating installable Inline modules. It has been removed from Inline altogether and replaced with a much simpler and more powerful mechanism, "Inline::MakeMaker". See the section below on how to create modules with Inline.
"_testing": Used internally by Ct09parser.t and Ct10callback.t(in the Inline::C test suite). Setting this option with Inline::C will mean that files named "parser_id" and "void_test" are created in the "./Inline_test" directory, creating that directory if it doesn't already exist. The files (but not the "./Inline_test directory") are cleaned up by calling Inline::C::_testing_cleanup(). Also used by "t/06rewrite_config.t" to trigger a warning.
"timers": Turn on "build_timers" to get extra diagnostic info about builds.
"unsafe": Turns "safemode" off. Use this in combination with "untaint" for slightly faster startup time under "-T". Only use this if you are sure the environment is safe.
"untaint": Turn the "untaint" option on. Used with "-T" switch. In terms of secure practices, this is definitely not a recommended way of dealing with taint checking, but it's the only option currently available with Inline. Use it at your own risk.
"version": Tells Inline to report its release version.

WRITING MODULES WITH INLINE¶

The current preferred way to author CPAN modules with Inline is to use Inline::Module (distributed separately). Inline ships with Inline::MakeMaker, which helps you set up a Makefile.PL that invokes Inline at install time to compile all the code before it gets installed, but the resulting module still depends on Inline and the language support module like Inline::C. In order to avoid this dependency, what you really want to do is convert your distribution to plain XS before uploading it to CPAN. Inline::Module fills that role, and also integrates well with more modern authoring tools.

See Inline::Module for details on that approach, or continue reading below for the older Inline::MakeMaker technique.

Let's say that you wanted to write a module called "Math::Simple". Start by using the following command:

    h2xs -PAXn Math::Simple

This will generate a bunch of files that form a skeleton of what you need for a distributable module. (Read the h2xs manpage to find out what the options do) Next, modify the "Simple.pm" file to look like this:

    package Math::Simple;
    $VERSION = '1.23';
    use base 'Exporter';
    @EXPORT_OK = qw(add subtract);
    use strict;
    use Inline C => 'DATA',
               version => '1.23',
               name => 'Math::Simple';
    # The following Inline->init() call is optional - see below for more info.
    #Inline->init();
    1;
    __DATA__
    =pod
    =cut
    __C__
    int add(int x, int y) {
      return x + y;
    }
    int subtract(int x, int y) {
      return x - y;
    }

The important things to note here are that you must specify a "name" and "version" parameter. The "name" must match your module's package name. The "version" parameter must match your module's $VERSION variable and they must be considered valid by "version::parse".

NOTE: These are Inline's sanity checks to make sure you know what you're doing
before uploading your code to CPAN. They insure that once the module has
been installed on someone's system, the module would not get
automatically recompiled for any reason. This makes Inline based modules
work in exactly the same manner as XS based ones.

Finally, you need to modify the Makefile.PL. Simply change:

    use ExtUtils::MakeMaker;

    use Inline::MakeMaker;

And, in order that the module build work correctly in the cpan shell, add the following directive to the Makefile.PL's WriteMakefile():

    CONFIGURE_REQUIRES  =>  {
        'Inline::MakeMaker'     => 0.45,
        'ExtUtils::MakeMaker'   => 6.52,
    },

This "CONFIGURE_REQUIRES" directive ensures that the cpan shell will install Inline on the user's machine (if it's not already present) before building your Inline-based module. Specifying of "ExtUtils::MakeMaker => 6.52," is optional, and can be omitted if you like. It ensures only that some harmless warnings relating to the "CONFIGURE_REQUIRES" directive won't be emitted during the building of the module. It also means, of course, that ExtUtils::Makemaker will first be updated on the user's machine unless the user already has version 6.52 or later.

If the "Inline->init();" is not done then, having installed Math::Simple, a warning that "One or more DATA sections were not processed by Inline" will appear when (and only when) Math::Simple is loaded by a "require call. It's a harmless warning - and if you're prepared to live with it, then there's no need to make the "Inline->init();" call.

When the person installing "Math::Simple" does a ""make"", the generated Makefile will invoke Inline in such a way that the C code will be compiled and the executable code will be placed into the "./blib" directory. Then when a ""make install"" is done, the module will be copied into the appropriate Perl sitelib directory (which is where an installed module should go).

Now all you need to do is:

    perl Makefile.PL
    make dist

That will generate the file "Math-Simple-0.20.tar.gz" which is a distributable package. (It will also generate some harmless warnings in relation to "CONFIGURE_REQUIRES" unless the version of your ExtUtils::MakeMaker is 6.52 or later.) That's all there is to it.

IMPORTANT NOTE: Although the above steps will produce a workable module, you still have a few more responsibilities as a budding new CPAN author. You need to write lots of documentation and write lots of tests. Take a look at some of the better CPAN modules for ideas on creating a killer test harness. Actually, don't listen to me, go read these:

perldoc perlnewmod
<http://www.cpan.org/modules/04pause.html>
<http://www.cpan.org/modules/00modlist.long.html>

HOW INLINE WORKS¶

In reality, Inline just automates everything you would need to do if you were going to do it by hand (using XS, etc).

Inline performs the following steps:

Receive the Source Code
Inline gets the source code from your script or module with a statements like the following:
```
    use Inline C => "Source-Code";
    
```
or
```
    use Inline;
    bind Inline C => "Source-Code";
    
```
where "C" is the programming language of the source code, and "Source- Code" is a string, a file name, an array reference, or the special 'DATA' keyword.

Since Inline is coded in a ""use"" statement, everything is done during Perl's compile time. If anything needs to be done that will affect the "Source- Code", it needs to be done in a "BEGIN" block that is before the ""use Inline ..."" statement. If you really need to specify code to Inline at runtime, you can use the bind() method.

Source code that is stowed in the 'DATA' section of your code, is read in by an "INIT" subroutine in Inline. That's because the "DATA" filehandle is not available at compile time.
Check if the Source Code has been Built
Inline only needs to build the source code if it has not yet been built. It accomplishes this seemingly magical task in an extremely simple and straightforward manner. It runs the source text through the "Digest::MD5" module to produce a 128-bit "fingerprint" which is virtually unique. The fingerprint along with a bunch of other contingency information is stored in a ".inl" file that sits next to your executable object. For instance, the "C" code from a script called "example.pl" might create these files:
```
    example_pl_3a9a.so
    example_pl_3a9a.inl
    
```
If all the contingency information matches the values stored in the ".inl" file, then proceed to step 8. (No compilation is necessary)
Find a Place to Build and Install
At this point Inline knows it needs to build the source code. The first thing to figure out is where to create the great big mess associated with compilation, and where to put the object when it's done.

By default Inline will try to build and install under the first place that meets one of the following conditions:

1.: The DIRECTORY= config option; if specified
2.: The "PERL_INLINE_DIRECTORY" environment variable; if set
3.: ".Inline/" (in current directory); if exists and "$PWD != $HOME"
4.: bin.Inline (in directory of your script); if exists
5.: "~/.Inline/" - if exists
6.: "./_Inline/" - if exists
7.: "bin/_Inline" - if exists
8.: Create "./_Inline/" - if possible
9.: Create "bin/_Inline/" - if possible

Failing that, Inline will croak. This is rare and easily remedied by just making a directory that Inline will use.

If the "PERL_INSTALL_ROOT" Environment Variable has been set, you will need to make special provision for that if the 'make install' phase of your Inline scripts are to succeed.

If the module option is being compiled for permanent installation, then Inline will only use "./_Inline/" to build in, and the $Config{installsitearch} directory to install the executable in. This action is caused by Inline::MakeMaker, and is intended to be used in modules that are to be distributed on the CPAN, so that they get installed in the proper place.

Parse the Source for Semantic Cues
Inline::C uses the module "Parse::RecDescent" to parse through your chunks of C source code and look for things that it can create run-time bindings to. In "C" it looks for all of the function definitions and breaks them down into names and data types. These elements are used to correctly bind the "C" function to a "Perl" subroutine. Other Inline languages like Python and Java actually use the "python" and "javac" modules to parse the Inline code.
Create the Build Environment
Now Inline can take all of the gathered information and create an environment to build your source code into an executable. Without going into all the details, it just creates the appropriate directories, creates the appropriate source files including an XS file (for C) and a "Makefile.PL".
Build the Code and Install the Executable
The planets are in alignment. Now for the easy part. Inline just does what you would do to install a module. "`perl Makefile.PL && make && make test && make install>". If something goes awry, Inline will croak with a message indicating where to look for more info.
Tidy Up
By default, Inline will remove all of the mess created by the build process, assuming that everything worked. If the build fails, Inline will leave everything intact, so that you can debug your errors. Setting the "noclean" shortcut option will also stop Inline from cleaning up.
DynaLoad the Executable
For C (and C++), Inline uses the "DynaLoader::bootstrap" method to pull your external module into "Perl" space. Now you can call all of your external functions like Perl subroutines.

Other languages like Python and Java, provide their own loaders.

BUGS AND DEFICIENCIES¶

When reporting a bug, please do the following:

Put "use Inline 'reportbug';" at the top of your code, or use the command line option "perl -MInline=reportbug ...".
Run your code.
Follow the printed directions.

AUTHOR¶

Ingy döt Net <ingy@cpan.org>

Sisyphus <sisyphus@cpan.org> fixed some bugs and is current co-maintainer.

COPYRIGHT¶

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

See <http://www.perl.com/perl/misc/Artistic.html>

2022-01-14

perl v5.40.0

Source file:	Inline.3pm.en.gz (from perl-Inline 0.86-2.12)
Source last updated:	2022-01-14T14:34:11Z
Converted to HTML:	2024-12-31T00:58:59Z