1. Manuals
  2. Tumbleweed
  3. nvme-cli
  4. nvme-copy(1)

Scroll to navigation

NVME-COPY(1) NVMe Manual NVME-COPY(1)

NAME

nvme-copy - Send an NVMe Simple Copy command, provide results

SYNOPSIS

nvme-copy <device> [--sdlba=<sdlba> | -d <sdlba>]


                        [--blocks=<nlb-list,> | -b <nlb-list,>]


                        [--slbs=<slbas,> | -s <slbas,>]


                        [--snsids=<snsids,> | -N <snsids,>]


                        [--sopts=<sopts,> | -O <sopts,>]


                        [--limited-retry | -l]


                        [--force-unit-access | -f]


                        [--prinfow=<prinfow> | -p <prinfow>]


                        [--prinfor=<prinfor> | -P <prinfor>]


                        [--ref-tag=<reftag> | -r <reftag>]


                        [--expected-ref-tags=<reftag,> | -R <reftag,>]


                        [--app-tag=<apptag> | -a <apptag>]


                        [--expected-app-tags=<apptag,> | -A <apptag,>]


                        [--app-mask=<appmask> | -m <appmask>]


                        [--expected-app-masks=<appmask,> | -M <appmask,>]


                        [--dir-type=<type> | -T <type>]


                        [--dir-spec=<spec> | -S <spec>]


                        [--format=<entry-format> | -F <entry-format>]


                        [--output-format=<fmt> | -o <fmt>] [--verbose | -v]

DESCRIPTION

The Copy command is used by the host to copy data from one or more source logical block ranges to a single consecutive destination logical block range.

OPTIONS

-d <sdlba>, --sdlba=<sdlba>

64-bit addr of first destination logical block

-b <nlb-list,>, --blocks=<nlb-list,>

Comma separated list of the number of blocks in each range

-s <slbas,>, --slbs=<slbas,>

Comma separated list of the starting blocks in each range

--snsids=<snsids,>, -N <snsids,>

Comma separated list of the source namespace identifiers in each range

--sopts=<sopts,>, -O <sopts,>

Comma separated list of the source options in each range

-l, --limited-retry

Sets the limited retry flag.

-f, --force-unit-access

Set the force-unit access flag.

-p <prinfow>, --prinfow=<prinfow>

Protection Information field write definition.

-P <prinfor>, --prinfor=<prinfor>

Protection Information field read definition.

-r <reftag>, --ref-tag=<reftag>

initial lba reference tag.

-R <reftag,>, --expected-ref-tags=<reftag,>

expected lba reference tags (comma-separated list).

-a <apptag>, --app-tag=<apptag>

lba app tag

-A <apptag,>, --expected-app-tags=<apptag,>

expected lba app tags (comma-separated list)

-m <appmask>, --app-mask=<appmask>

lba tag mask

-M <appmask,>, --expected-app-masks=<appmask,>

expected lba tag masks (comma-separated list)

-T <type>, --dir-type=<type>

Optional directive type. The nvme-cli only enforces the value be in the defined range for the directive type, though the NVMe specification (1.3a) defines only one directive, 01h, for write stream identifiers.

-S <spec>, --dir-spec=<spec>

Optional field for directive specifics. When used with write streams, this value is defined to be the write stream identifier. The nvme-cli will not validate the stream requested is within the controller’s capabilities.

-F <entry-format>, --format=<entry-format>

source range entry format

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, json or binary. Only one output format can be used at a time.

-v, --verbose

Increase the information detail in the output.

EXAMPLES

No examples yet.

NVME

Part of the nvme-user suite

02/14/2024 NVMe