| RICHCOMM_USB(8) | NUT Manual | RICHCOMM_USB(8) |
NAME¶
richcomm_usb - Driver UPS equipment using Richcomm dry-contact to USB solution
SYNOPSIS¶
richcomm_usb -h
richcomm_usb -a UPS_NAME [OPTIONS]
Note
This man page only documents the specific features of the richcomm_usb driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE¶
The Richcomm dry-contact to USB solution is a generic interface that is used to upgrade an existing (RS-232) contact closure UPS interface to USB. As such, all the limitations of the underlying contact closure interface apply. This means that you will only get the essentials in ups.status: OL, OB, and LB. See also genericups(8).
BUGS¶
Most contact-closure UPSes will not power down the load if the line power is present. This can create a race when using secondary upsmon(8) systems. See the upsmon(8) man page for more information.
The solution to both of these problems is to upgrade to a smart protocol UPS of some kind that allows detection and proper load cycling on command.
AUTHORS¶
SEE ALSO¶
The core driver:¶
The generic serial driver:¶
Internet resources:¶
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/
| 09/29/2024 | Network UPS Tools 2.8.2 |