NAME¶

nut-upower - Driver for UPower devices via D-Bus

SYNOPSIS¶

nut-upower -h

nut-upower -a UPS_NAME [OPTIONS]

Note

This man page only documents the specific features of the nut-upower driver. For information about the core driver, see nutupsdrv(8).

DESCRIPTION¶

This driver allows the monitoring of power devices (UPS, batteries) that are managed by the UPower daemon via the D-Bus system bus.

It maps UPower properties (state, percentage, voltage, etc.) to standard NUT variables, allowing NUT clients to monitor devices that are natively supported by the OS desktop environment but not directly by other NUT drivers.

EXTRA ARGUMENTS¶

This driver supports the following optional settings in ups.conf(5):

port

The UPower Object Path of the device to monitor.

If set to auto (the default), the driver will scan for the first UPower device whose object path contains the string "ups_".

If set to a specific path (e.g., /org/freedesktop/UPower/devices/ups_hiddev0), the driver will attempt to monitor that specific device.

lowbatt

The battery percentage threshold below which the LB (Low Battery) status flag is set. The default value is 20.0.

INSTALLATION¶

To use this driver, add a section to your ups.conf:

[myups]


    driver = nut-upower


    port = auto


    lowbatt = 20


    desc = "Laptop Battery or generic UPS via UPower"

REQUIREMENTS¶

This driver requires the upower daemon to be running and accessible via the D-Bus system bus. It also requires GLib 2.0 and GIO libraries.

AUTHOR¶

Tim Niemueller <tim@niemueller.de>