| NUT-RECORDER(8) | NUT Manual | NUT-RECORDER(8) |
NAME¶
nut-recorder - utility to record device status and values changes
SYNOPSIS¶
nut-recorder device-name [output-file] [interval]
DESCRIPTION¶
nut-recorder is an utility to record sequences from running devices (such as power failures, or any other value changes) from upsd, and dump it in a .seq format.
The .seq file can then be used by the dummy-ups(8) driver to replay the sequence.
OPTIONS¶
device-name
Record the changes of this device. The format for this
option is devname[@hostname[:port]]. The default hostname is
"localhost".
output-file
Optional. Data will be saved to this file. The default is
dummy-device.seq.
interval
Optional. The status of the device will be checked every
interval. The default is 5 seconds.
EXAMPLES¶
To record data from ups1@host1 every 10 seconds:
$ nut-recorder ups1@host1' ups1-output.seq 10 . . . battery.charge: 100.0 battery.voltage: 13.9 battery.voltage.nominal: 13.6 ups.status: OL . . . battery.charge: 90.0 ups.status: OB . . .
You can then define a dummy device in ups.conf(5):
[ups-test]
driver = dummy-ups
port = ups1-output.seq
AUTHOR¶
Arnaud Quette
SEE ALSO¶
The dummy-ups driver:¶
Internet resources:¶
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/
| 09/29/2024 | Network UPS Tools 2.8.2 |