table of contents
MSTFLINT(1) | User Commands | MSTFLINT(1) |
NAME¶
mstflint - Flash Interface
DESCRIPTION¶
NAME mstflint - Flash Interface
SYNOPSIS¶
- mstflint [OPTIONS] <command> [Parameters]
- [-d|--device <device>] [-i|--image <image>] [--latest_fw] [--ir] [-h|--help] [--hh] [-y|--yes] [--no] [--guid <GUID>] [--guids <GUIDS...>] [--mac <MAC>] [--macs <MACs...>] [--uid <UID>] [--blank_guids] [--clear_semaphore] [--qq] [--low_cpu] [--flashed_version] [--nofs] [--allow_rom_change] [--override_cache_replacement] [--no_flash_verify] [--use_fw] [-s|--silent] [--vsd <string>] [--use_image_ps] [--use_image_guids] [--use_image_rom] [--use_dev_rom] [--ignore_dev_data] [--no_fw_ctrl] [--dual_image] [--striped_image] [--banks <bank>] [--log <log_file>] [--flash_params <type, log2size, num_of_flashes>] [-v|--version] [--private_key <key_file>] [--key_uuid <uuid_file>] [--private_key2 <key_file>] [--hmac_key <hmac_key>] [--key_uuid2 <uuid_file>]
DESCRIPTION
- flint is a FW (firmware) burning and flash memory operations tool for Mellanox Infiniband HCAs,Ethernet NIC cards, and switch devices.
OPTIONS¶
- -d|--device <device>
- Device flash is connected to. Commands affected: all
- -i|--image <image>
- Binary image file. Commands affected: burn, verify
- --latest_fw
- : Commands affected: burn
- --ir
- : Commands affected: burn
- -h|--help
- Prints this message and exits
- --hh
- Prints extended command help
- -y|--yes
- Non interactive mode - assume answer "yes" to all questions. Commands affected: all
- --no
- Non interactive mode - assume answer "no" to all questions. Commands affected: all
- --guid <GUID>
- GUID base value. 4 GUIDs are automatically assigned to the following values:
- guid
- -> node GUID
- guid+1 -> port1
- guid+2 -> port2 guid+3 -> system image GUID.
- Note: port2 guid will be assigned even for a
- single port HCA - The HCA ignores this value.
- Commands affected: burn, sg
- --guids <GUIDS...>
- 4 GUIDs must be specified here. The specified GUIDs are assigned to the following fields, respectively: node, port1, port2 and system image GUID.
- Note: port2 guid must be specified even for
- a single port HCA - The HCA ignores this value. It can be set to 0x0.
- Commands affected: burn, sg
- --mac <MAC>
- MAC address base value. 2 MACs are automatically assigned to the following values:
- mac
- -> port1
- mac+1
- -> port2
- Commands affected: burn, sg
- --macs <MACs...>
- 2 MACs must be specified here. The specified MACs are assigned to port1, port2, respectively. Commands affected: burn, sg
- Note: -mac/-macs flags are applicable only
- for Mellanox
- Technologies ethernet products.
- --uid <UID>
- ConnectIB/SwitchIB only. Derive and set the device UIDs (GUIDs, MACs, WWNs). UIDs are derived from the given base UID according to Mellanox Methodology Commands affected: burn, sg
- --blank_guids
- Burn the image with blank GUIDs and MACs (where applicable). These values can be set later using the "sg" command (see details below).
- Commands affected: burn
- --clear_semaphore
- Force clear the flash semaphore on the device. No command is allowed when this flag is used. NOTE: May result in system instability or flash corruption if the device or another application is currently using the flash. Exercise caution.
- Run a quick query. When specified, flint will not perform full image integrity checks during the query operation. This may shorten execution time when running over slow interfaces (e.g., I2C, MTUSB-1). Commands affected: query
- --low_cpu
- : When specified, cpu usage will be reduced. Run time might be increased Commands affected: query
- --flashed_version
- : When specified, only flashed fw version is fetched Commands affected: query
- --nofs
- Burn image in a non failsafe manner.
- --allow_rom_change
- Allow burning/removing a ROM to/from FW image when product version is present. Use only if you know what you are doing
- --override_cache_replacement
- On SwitchX/ConnectIB devices: Allow accessing the flash even if the cache replacement mode is enabled. NOTE: This flag is intended for advanced users only. Running in this mode may cause the firmware to hang.
- --no_flash_verify
- Do not verify each write on the flash.
- --use_fw
- Flash access will be done using FW (ConnectX-3/ConnectX-3Pro only).
- -s|--silent
- Do not print burn progress flyer. Commands affected: burn
- --vsd <string>
- Write this string, of up to 208 characters, to VSD when burn.
- --use_image_ps
- Burn vsd as appears in the given image - do not keep existing VSD on flash. Commands affected: burn
- --use_image_guids
- Burn (guids/macs) as appears in the given image. Commands affected: burn
- --use_image_rom
- Do not save the ROM which exists in the device. Commands affected: burn
- --use_dev_rom
- Save the ROM which exists in the device. Commands affected: burn
- --ignore_dev_data
- Do not attempt to take device data sections from device(sections will be taken from the image. FS3 Only). Commands affected: burn
- --no_fw_ctrl
- Do not attempt to work with the FW Ctrl update commands
- --dual_image
- Make the burn process burn two images on flash (previously default algorithm). Current default failsafe burn process burns a single image (in alternating locations). Commands affected: burn
- --striped_image
- Use this flag to indicate that the given image file is in a "striped image" format. Commands affected: query verify
- --banks <bank>
- Set the number of attached flash devices (banks)
- --log <log_file>
- Print the burning status to the specified log file
--flash_params <type, log2size,
- num_of_flashes>
- Use the given parameters to access the flash
- instead of reading them from the flash.
- Supported parameters: Type: The type of the flash, such as:M25PXxx, M25Pxx, N25Q0XX, SST25VFxx, W25QxxBV, W25Xxx, W25Qxxx, W25Qxxx, AT25DFxxx, S25FLXXXP, S25FL11xx, MX25L16xxx, MX25Lxxx, S25FLxxx, IS25LPxxx. log2size: The log2 of the flash size.num_of_flashes: the number of the flashes connected to the device.
- -v|--version
- Version info.
- --private_key <key_file>
- path to PEM formatted private key to be used by the sign command
- --key_uuid <uuid_file>
- UUID matching the given private key to be used by the sign command
- --private_key2 <key_file>
- path to PEM formatted private key to be used by the sign command
- --hmac_key <hmac_key>
- path to file containing key (For FS4 image only).
- --key_uuid2 <uuid_file>
- UUID matching the given private key to be used by the sign command
COMMANDS SUMMARY
- burn|b -ir
- Burn flash. Use "-ir burn" flag to perform
- image reactivation prior burning.
- query|q [full]
- Query misc. flash/firmware characteristics,
- use "full" to get more information.
- verify|v [showitoc]
- Verify entire flash, use "showitoc" to see
- ITOC headers in FS3/FS4 image only.
- swreset
- SW reset the target switch device.This
- command is supported only in the In-Band access method.
- brom
- <ROM-file> : Burn the specified ROM file on the flash.
- drom
- Remove the ROM section from the flash.
- rrom
- <out-file> : Read the ROM section from the flash.
- bb
- Burn Block - Burns the given image as is. No
- checks are done.
- sg
- [guids_num=<num|num_port1,num_port2>
- step_size=<size|size_port1,size_port2>] | [nocrc] : Set GUIDs. sv : Set the VSD. ri <out-file> : Read the fw image on the flash. dc [out-file] : Dump Configuration: print fw configuration
- file for the given image.
- dh
- [out-file] : Dump Hash: dump the hash if it is integrated
- in the FW image
- set_key
- [key] : Set/Update the HW access key which is used to
- enable/disable access to HW.
- The key can be provided in the command line or interactively typed after the command is given NOTE: The new key is activated only after the device is reset.
- hw_access
- <enable|disable> [key] : Enable/disable the access to the HW.
- The key can be provided in the command line
- or interactively typed after the command is given
- hw
- query : Query HW info and flash attributes.
- erase|e <addr>
- Erases sector.
- rw
- <addr> : Read one dword from flash
- ww
- <addr> <data> : Write one dword to flash
- wwne
- <addr> <data> : Write one dword to flash without sector
- erase
- wbne
- <addr> <size> <data ...> : Write a data block to flash without sector
- erase.
- wb
- <data-file> <addr> : Write a data block to flash.
- rb
- <addr> <size> [out-file] : Read a data block from flash
- clear_semaphore
- Clear flash semaphore.
- qrom
- query ROM image.
- checksum|cs
- perform MD5 checksum on FW.
- timestamp|ts <set|query|reset> [timestamp] [FW version] : FW time stamping. cache_image|ci : cache FW image(Windows only). sign : Sign firmware image file sign_with_hmac : Sign image with HMAC set_public_keys [public keys binary file] : Set Public Keys (For FS3/FS4 image only). set_forbidden_versions [forbidden versions binary file] : Set Forbidden Versions (For FS3/FS4 image
- only).
- image_reactivate|ir
- : Reactivate previous flash image. For FW
- controlled devices only.
- binary_compare|bc
- : Binary compare between device firmware and
- given BIN file. If there is a silent mode, no progress is displayed.
RETURN VALUES¶
- 0
- Successful completion.
- 1
- An error has occurred.
- 7
- For burn command - FW already updated - burn was aborted.
SEE ALSO¶
March 2020 | mstflint |