Scroll to navigation

XkbDeviceBellEvent(3) XKB FUNCTIONS XkbDeviceBellEvent(3)


XkbDeviceBellEvent - Creates a bell event for an X input extension device or for the keyboard, without ringing the corresponding bell


Bool XkbDeviceBellEvent (Display *display, Window window, unsigned int device_spec, unsigned int bell_class, unsigned int bell_id, int percent, Atom name);


connection to the X server
event window, or None
device ID, or XkbUseCoreKbd
input extension bell class for the event
input extension bell ID for the event
volume for the bell, which can range from -100 to 100 inclusive
a bell name, or NULL


The core X protocol allows only applications to explicitly sound the system bell with a given duration, pitch, and volume. Xkb extends this capability by allowing clients to attach symbolic names to bells, disable audible bells, and receive an event whenever the keyboard bell is rung. For the purposes of this document, the audible bell is defined to be the system bell, or the default keyboard bell, as opposed to any other audible sound generated elsewhere in the system. You can ask to receive XkbBellNotify events when any client rings any one of the following:

  • The default bell
  • Any bell on an input device that can be specified by a bell_class and bell_id pair
  • Any bell specified only by an arbitrary name. (This is, from the server's point of view, merely a name, and not connected with any physical sound-generating device. Some client application must generate the sound, or visual feedback, if any, that is associated with the name.)

    You can also ask to receive XkbBellNotify events when the server rings the default bell or if any client has requested events only (without the bell sounding) for any of the bell types previously listed.

    You can disable audible bells on a global basis. For example, a client that replaces the keyboard bell with some other audible cue might want to turn off the AudibleBell control to prevent the server from also generating a sound and avoid cacophony. If you disable audible bells and request to receive XkbBellNotify events, you can generate feedback different from the default bell.

    You can, however, override the AudibleBell control by calling one of the functions that force the ringing of a bell in spite of the setting of the AudibleBell control - XkbForceDeviceBell or XkbForceBell. In this case the server does not generate a bell event.

    Just as some keyboards can produce keyclicks to indicate when a key is pressed or repeating, Xkb can provide feedback for the controls by using special beep codes. The AccessXFeedback control is used to configure the specific types of operations that generate feedback.

    Bell Names

    You can associate a name to an act of ringing a bell by converting the name to an Atom and then using this name when you call the functions listed in this chapter. If an event is generated as a result, the name is then passed to all other clients interested in receiving XkbBellNotify events. Note that these are arbitrary names and that there is no binding to any sounds. Any sounds or other effects (such as visual bells on the screen) must be generated by a client application upon receipt of the bell event containing the name. There is no default name for the default keyboard bell. The server does generate some predefined bells for the AccessX controls. These named bells are shown in the Table 1 below; the name is included in any bell event sent to clients that have requested to receive XkbBellNotify events.

    Table 1 Predefined Bells
    Action Named Bell
    Indicator turned on AX_IndicatorOn
    Indicator turned off AX_IndicatorOff
    More than one indicator changed state AX_IndicatorChange
    Control turned on AX_FeatureOn
    Control turned off AX_FeatureOff
    More than one control changed state AX_FeatureChange
    SlowKeys and BounceKeys about to be turned on or off AX_SlowKeysWarning
    SlowKeys key pressed AX_SlowKeyPress
    SlowKeys key accepted AX_SlowKeyAccept
    SlowKeys key rejected AX_SlowKeyReject
    Accepted SlowKeys key released AX_SlowKeyRelease
    BounceKeys key rejected AX_BounceKeyReject
    StickyKeys key latched AX_StickyLatch
    StickyKeys key locked AX_StickyLock
    StickyKeys key unlocked AX_StickyUnlock

    Audible Bells

    Using Xkb you can generate bell events that do not necessarily ring the system bell. This is useful if you need to use an audio server instead of the system beep. For example, when an audio client starts, it could disable the audible bell (the system bell) and then listen for XkbBellNotify events. When it receives a XkbBellNotify event, the audio client could then send a request to an audio server to play a sound.

    You can control the audible bells feature by passing the XkbAudibleBellMask to XkbChangeEnabledControls. If you set XkbAudibleBellMask on, the server rings the system bell when a bell event occurs. This is the default. If you set XkbAudibleBellMask off and a bell event occurs, the server does not ring the system bell unless you call XkbForceDeviceBell or XkbForceBell.

    Audible bells are also part of the per-client auto-reset controls.

    Bell Functions

    Use the functions described in this section to ring bells and to generate bell events.

    The input extension has two types of feedbacks that can generate bells - bell feedback and keyboard feedback. Some of the functions in this section have bell_class and bell_id parameters; set them as follows: Set bell_class to BellFeedbackClass or KbdFeedbackClass. A device can have more than one feedback of each type; set bell_id to the particular bell feedback of bell_class type.

    Table 2 shows the conditions that cause a bell to sound or an XkbBellNotifyEvent to be generated when a bell function is called.

    Table 2 Bell Sounding and Bell Event Generating
    Function called AudibleBell Server sounds a bell Server sends an
    XkbDeviceBell On Yes Yes
    XkbDeviceBell Off No Yes
    XkbBell On Yes Yes
    XkbBell Off No Yes
    XkbDeviceBellEvent On or Off No Yes
    XkbBellEvent On or Off No Yes
    XkbDeviceForceBell On or Off Yes No
    XkbForceBell On or Off Yes No

    If a compatible keyboard extension isn't present in the X server, XkbDeviceBellEvent immediately returns False. Otherwise, XkbDeviceBellEvent causes an XkbBellNotify event to be sent to all interested clients and returns True. Set percent to be the volume relative to the base volume for the keyboard as described for XBell.

    In addition, XkbDeviceBellEvent may generate Atom protocol errors as well as XkbBellNotify events. You can call XkbBell without first initializing the keyboard extension.


The XkbDeviceBellEvent sends an XkbBellNotify event to to all interested clients and returns True.
If a compatible keyboard extension isn't present in the X server, XkbDeviceBellEvent immediately returns False


calls to XkbForceDeviceBell and XkbForceBell. To receive XkbBellNotify events under all possible conditions, pass XkbBellNotifyMask in both the bits_to_change and values_for_bits parameters to XkbSelectEvents.

The XkbBellNotify event has no event details. It is either selected or it is not. However, you can call XkbSelectEventDetails using XkbBellNotify as the event_type and specifying XkbAllBellEventsMask in bits_to_change and values_for_bits. This has the same effect as a call to XkbSelectEvents.

The structure for the XkbBellNotify event type contains:

typedef struct _XkbBellNotify {
int type; /* Xkb extension base event code */
unsigned long serial; /* X server serial number for event */
Bool send_event; /* True => synthetically generated */
Display * display; /* server connection where event generated */
Time time; /* server time when event generated */
int xkb_type; /* XkbBellNotify */
unsigned int device; /* Xkb device ID, will not be XkbUseCoreKbd */
int percent; /* requested volume as % of max */
int pitch; /* requested pitch in Hz */
int duration; /* requested duration in microseconds */
unsigned int bell_class; /* X input extension feedback class */
unsigned int bell_id; /* X input extension feedback ID */
Atom name; /* "name" of requested bell */
Window window; /* window associated with event */
Bool event_only; /* False -> the server did not produce a beep */
} XkbBellNotifyEvent;
If your application needs to generate visual bell feedback on the screen when it receives a bell event, use the window ID in the XkbBellNotifyEvent, if present.


XBell(3), XkbBellNotify(3), XkbChangeEnabledControls(3), XkbDeviceBell(3), XkbForceBell(3), XkbForceDeviceBell(3), XkbSelectEvents(3), XkbSelectEventDetails(3), XkbUseCoreKbd(3)

libX11 1.8.9 X Version 11