!>
!> SDRGEV3 checks the nonsymmetric generalized eigenvalue problem driver
!> routine SGGEV3.
!>
!> SGGEV3 computes for a pair of n-by-n nonsymmetric matrices (A,B) the
!> generalized eigenvalues and, optionally, the left and right
!> eigenvectors.
!>
!> A generalized eigenvalue for a pair of matrices (A,B) is a scalar w
!> or a ratio  alpha/beta = w, such that A - w*B is singular.  It is
!> usually represented as the pair (alpha,beta), as there is reasonable
!> interpretation for beta=0, and even for both being zero.
!>
!> A right generalized eigenvector corresponding to a generalized
!> eigenvalue  w  for a pair of matrices (A,B) is a vector r  such that
!> (A - wB) * r = 0.  A left generalized eigenvector is a vector l such
!> that l**H * (A - wB) = 0, where l**H is the conjugate-transpose of l.
!>
!> When SDRGEV3 is called, a number of matrix  () and a
!> number of matrix  are specified.  For each size ()
!> and each type of matrix, a pair of matrices (A, B) will be generated
!> and used for testing.  For each matrix pair, the following tests
!> will be performed and compared with the threshold THRESH.
!>
!> Results from SGGEV3:
!>
!> (1)  max over all left eigenvalue/-vector pairs (alpha/beta,l) of
!>
!>      | VL**H * (beta A - alpha B) |/( ulp max(|beta A|, |alpha B|) )
!>
!>      where VL**H is the conjugate-transpose of VL.
!>
!> (2)  | |VL(i)| - 1 | / ulp and whether largest component real
!>
!>      VL(i) denotes the i-th column of VL.
!>
!> (3)  max over all left eigenvalue/-vector pairs (alpha/beta,r) of
!>
!>      | (beta A - alpha B) * VR | / ( ulp max(|beta A|, |alpha B|) )
!>
!> (4)  | |VR(i)| - 1 | / ulp and whether largest component real
!>
!>      VR(i) denotes the i-th column of VR.
!>
!> (5)  W(full) = W(partial)
!>      W(full) denotes the eigenvalues computed when both l and r
!>      are also computed, and W(partial) denotes the eigenvalues
!>      computed when only W, only W and r, or only W and l are
!>      computed.
!>
!> (6)  VL(full) = VL(partial)
!>      VL(full) denotes the left eigenvectors computed when both l
!>      and r are computed, and VL(partial) denotes the result
!>      when only l is computed.
!>
!> (7)  VR(full) = VR(partial)
!>      VR(full) denotes the right eigenvectors computed when both l
!>      and r are also computed, and VR(partial) denotes the result
!>      when only l is computed.
!>
!>
!> Test Matrices
!> ---- --------
!>
!> The sizes of the test matrices are specified by an array
!> NN(1:NSIZES); the value of each element NN(j) specifies one size.
!> The  are specified by a logical array DOTYPE( 1:NTYPES ); if
!> DOTYPE(j) is .TRUE., then matrix type  will be generated.
!> Currently, the list of possible types is:
!>
!> (1)  ( 0, 0 )         (a pair of zero matrices)
!>
!> (2)  ( I, 0 )         (an identity and a zero matrix)
!>
!> (3)  ( 0, I )         (an identity and a zero matrix)
!>
!> (4)  ( I, I )         (a pair of identity matrices)
!>
!>         t   t
!> (5)  ( J , J  )       (a pair of transposed Jordan blocks)
!>
!>                                     t                ( I   0  )
!> (6)  ( X, Y )         where  X = ( J   0  )  and Y = (      t )
!>                                  ( 0   I  )          ( 0   J  )
!>                       and I is a k x k identity and J a (k+1)x(k+1)
!>                       Jordan block; k=(N-1)/2
!>
!> (7)  ( D, I )         where D is diag( 0, 1,..., N-1 ) (a diagonal
!>                       matrix with those diagonal entries.)
!> (8)  ( I, D )
!>
!> (9)  ( big*D, small*I ) where  is near overflow and small=1/big
!>
!> (10) ( small*D, big*I )
!>
!> (11) ( big*I, small*D )
!>
!> (12) ( small*I, big*D )
!>
!> (13) ( big*D, big*I )
!>
!> (14) ( small*D, small*I )
!>
!> (15) ( D1, D2 )        where D1 is diag( 0, 0, 1, ..., N-3, 0 ) and
!>                        D2 is diag( 0, N-3, N-4,..., 1, 0, 0 )
!>           t   t
!> (16) Q ( J , J ) Z     where Q and Z are random orthogonal matrices.
!>
!> (17) Q ( T1, T2 ) Z    where T1 and T2 are upper triangular matrices
!>                        with random O(1) entries above the diagonal
!>                        and diagonal entries diag(T1) =
!>                        ( 0, 0, 1, ..., N-3, 0 ) and diag(T2) =
!>                        ( 0, N-3, N-4,..., 1, 0, 0 )
!>
!> (18) Q ( T1, T2 ) Z    diag(T1) = ( 0, 0, 1, 1, s, ..., s, 0 )
!>                        diag(T2) = ( 0, 1, 0, 1,..., 1, 0 )
!>                        s = machine precision.
!>
!> (19) Q ( T1, T2 ) Z    diag(T1)=( 0,0,1,1, 1-d, ..., 1-(N-5)*d=s, 0 )
!>                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0 )
!>
!>                                                        N-5
!> (20) Q ( T1, T2 ) Z    diag(T1)=( 0, 0, 1, 1, a, ..., a   =s, 0 )
!>                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0, 0 )
!>
!> (21) Q ( T1, T2 ) Z    diag(T1)=( 0, 0, 1, r1, r2, ..., r(N-4), 0 )
!>                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0, 0 )
!>                        where r1,..., r(N-4) are random.
!>
!> (22) Q ( big*T1, small*T2 ) Z    diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
!>                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )
!>
!> (23) Q ( small*T1, big*T2 ) Z    diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
!>                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )
!>
!> (24) Q ( small*T1, small*T2 ) Z  diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
!>                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )
!>
!> (25) Q ( big*T1, big*T2 ) Z      diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
!>                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )
!>
!> (26) Q ( T1, T2 ) Z     where T1 and T2 are random upper-triangular
!>                         matrices.
!>
!> 

NSIZES

!>          NSIZES is INTEGER
!>          The number of sizes of matrices to use.  If it is zero,
!>          SDRGEV3 does nothing.  NSIZES >= 0.
!> 

NN

!>          NN is INTEGER array, dimension (NSIZES)
!>          An array containing the sizes to be used for the matrices.
!>          Zero values will be skipped.  NN >= 0.
!> 

NTYPES

!>          NTYPES is INTEGER
!>          The number of elements in DOTYPE.   If it is zero, SDRGEV3
!>          does nothing.  It must be at least zero.  If it is MAXTYP+1
!>          and NSIZES is 1, then an additional type, MAXTYP+1 is
!>          defined, which is to use whatever matrix is in A.  This
!>          is only useful if DOTYPE(1:MAXTYP) is .FALSE. and
!>          DOTYPE(MAXTYP+1) is .TRUE. .
!> 

DOTYPE

!>          DOTYPE is LOGICAL array, dimension (NTYPES)
!>          If DOTYPE(j) is .TRUE., then for each size in NN a
!>          matrix of that size and of type j will be generated.
!>          If NTYPES is smaller than the maximum number of types
!>          defined (PARAMETER MAXTYP), then types NTYPES+1 through
!>          MAXTYP will not be generated. If NTYPES is larger
!>          than MAXTYP, DOTYPE(MAXTYP+1) through DOTYPE(NTYPES)
!>          will be ignored.
!> 

ISEED

!>          ISEED is INTEGER array, dimension (4)
!>          On entry ISEED specifies the seed of the random number
!>          generator. The array elements should be between 0 and 4095;
!>          if not they will be reduced mod 4096. Also, ISEED(4) must
!>          be odd.  The random number generator uses a linear
!>          congruential sequence limited to small integers, and so
!>          should produce machine independent random numbers. The
!>          values of ISEED are changed on exit, and can be used in the
!>          next call to SDRGEV3 to continue the same random number
!>          sequence.
!> 

THRESH

!>          THRESH is REAL
!>          A test will count as  if the , computed as
!>          described above, exceeds THRESH.  Note that the error is
!>          scaled to be O(1), so THRESH should be a reasonably small
!>          multiple of 1, e.g., 10 or 100.  In particular, it should
!>          not depend on the precision (single vs. double) or the size
!>          of the matrix.  It must be at least zero.
!> 

NOUNIT

!>          NOUNIT is INTEGER
!>          The FORTRAN unit number for printing out error messages
!>          (e.g., if a routine returns IERR not equal to 0.)
!> 

A

!>          A is REAL array,
!>                                       dimension(LDA, max(NN))
!>          Used to hold the original A matrix.  Used as input only
!>          if NTYPES=MAXTYP+1, DOTYPE(1:MAXTYP)=.FALSE., and
!>          DOTYPE(MAXTYP+1)=.TRUE.
!> 

LDA

!>          LDA is INTEGER
!>          The leading dimension of A, B, S, and T.
!>          It must be at least 1 and at least max( NN ).
!> 

B

!>          B is REAL array,
!>                                       dimension(LDA, max(NN))
!>          Used to hold the original B matrix.  Used as input only
!>          if NTYPES=MAXTYP+1, DOTYPE(1:MAXTYP)=.FALSE., and
!>          DOTYPE(MAXTYP+1)=.TRUE.
!> 

S

!>          S is REAL array,
!>                                 dimension (LDA, max(NN))
!>          The Schur form matrix computed from A by SGGEV3.  On exit, S
!>          contains the Schur form matrix corresponding to the matrix
!>          in A.
!> 

T

!>          T is REAL array,
!>                                 dimension (LDA, max(NN))
!>          The upper triangular matrix computed from B by SGGEV3.
!> 

Q

!>          Q is REAL array,
!>                                 dimension (LDQ, max(NN))
!>          The (left) eigenvectors matrix computed by SGGEV3.
!> 

LDQ

!>          LDQ is INTEGER
!>          The leading dimension of Q and Z. It must
!>          be at least 1 and at least max( NN ).
!> 

Z

!>          Z is REAL array, dimension( LDQ, max(NN) )
!>          The (right) orthogonal matrix computed by SGGEV3.
!> 

QE

!>          QE is REAL array, dimension( LDQ, max(NN) )
!>          QE holds the computed right or left eigenvectors.
!> 

LDQE

!>          LDQE is INTEGER
!>          The leading dimension of QE. LDQE >= max(1,max(NN)).
!> 

ALPHAR

!>          ALPHAR is REAL array, dimension (max(NN))
!> 

ALPHAI

!>          ALPHAI is REAL array, dimension (max(NN))
!> 

BETA

!>          BETA is REAL array, dimension (max(NN))
!> \verbatim
!>          The generalized eigenvalues of (A,B) computed by SGGEV3.
!>          ( ALPHAR(k)+ALPHAI(k)*i ) / BETA(k) is the k-th
!>          generalized eigenvalue of A and B.
!> 

ALPHR1

!>          ALPHR1 is REAL array, dimension (max(NN))
!> 

ALPHI1

!>          ALPHI1 is REAL array, dimension (max(NN))
!> 

BETA1

!>          BETA1 is REAL array, dimension (max(NN))
!>
!>          Like ALPHAR, ALPHAI, BETA, these arrays contain the
!>          eigenvalues of A and B, but those computed when SGGEV3 only
!>          computes a partial eigendecomposition, i.e. not the
!>          eigenvalues and left and right eigenvectors.
!> 

WORK

!>          WORK is REAL array, dimension (LWORK)
!> 

LWORK

!>          LWORK is INTEGER
!>          The number of entries in WORK.  LWORK >= MAX( 8*N, N*(N+1) ).
!> 

RESULT

!>          RESULT is REAL array, dimension (2)
!>          The values computed by the tests described above.
!>          The values are currently limited to 1/ulp, to avoid overflow.
!> 

INFO

!>          INFO is INTEGER
!>          = 0:  successful exit
!>          < 0:  if INFO = -i, the i-th argument had an illegal value.
!>          > 0:  A routine returned an error code.  INFO is the
!>                absolute value of the INFO value returned.
!> 

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.