!>
!>    ZDRVVX  checks the nonsymmetric eigenvalue problem expert driver
!>    ZGEEVX.
!>
!>    ZDRVVX uses both test matrices generated randomly depending on
!>    data supplied in the calling sequence, as well as on data
!>    read from an input file and including precomputed condition
!>    numbers to which it compares the ones it computes.
!>
!>    When ZDRVVX is called, a number of matrix  () and a
!>    number of matrix  are specified in the calling sequence.
!>    For each size () and each type of matrix, one matrix will be
!>    generated and used to test the nonsymmetric eigenroutines.  For
!>    each matrix, 9 tests will be performed:
!>
!>    (1)     | A * VR - VR * W | / ( n |A| ulp )
!>
!>      Here VR is the matrix of unit right eigenvectors.
!>      W is a diagonal matrix with diagonal entries W(j).
!>
!>    (2)     | A**H  * VL - VL * W**H | / ( n |A| ulp )
!>
!>      Here VL is the matrix of unit left eigenvectors, A**H is the
!>      conjugate transpose of A, and W is as above.
!>
!>    (3)     | |VR(i)| - 1 | / ulp and largest component real
!>
!>      VR(i) denotes the i-th column of VR.
!>
!>    (4)     | |VL(i)| - 1 | / ulp and largest component real
!>
!>      VL(i) denotes the i-th column of VL.
!>
!>    (5)     W(full) = W(partial)
!>
!>      W(full) denotes the eigenvalues computed when VR, VL, RCONDV
!>      and RCONDE are also computed, and W(partial) denotes the
!>      eigenvalues computed when only some of VR, VL, RCONDV, and
!>      RCONDE are computed.
!>
!>    (6)     VR(full) = VR(partial)
!>
!>      VR(full) denotes the right eigenvectors computed when VL, RCONDV
!>      and RCONDE are computed, and VR(partial) denotes the result
!>      when only some of VL and RCONDV are computed.
!>
!>    (7)     VL(full) = VL(partial)
!>
!>      VL(full) denotes the left eigenvectors computed when VR, RCONDV
!>      and RCONDE are computed, and VL(partial) denotes the result
!>      when only some of VR and RCONDV are computed.
!>
!>    (8)     0 if SCALE, ILO, IHI, ABNRM (full) =
!>                 SCALE, ILO, IHI, ABNRM (partial)
!>            1/ulp otherwise
!>
!>      SCALE, ILO, IHI and ABNRM describe how the matrix is balanced.
!>      (full) is when VR, VL, RCONDE and RCONDV are also computed, and
!>      (partial) is when some are not computed.
!>
!>    (9)     RCONDV(full) = RCONDV(partial)
!>
!>      RCONDV(full) denotes the reciprocal condition numbers of the
!>      right eigenvectors computed when VR, VL and RCONDE are also
!>      computed. RCONDV(partial) denotes the reciprocal condition
!>      numbers when only some of VR, VL and RCONDE are computed.
!>
!>    The  are specified by an array NN(1:NSIZES); the value of
!>    each element NN(j) specifies one size.
!>    The  are specified by a logical array DOTYPE( 1:NTYPES );
!>    if DOTYPE(j) is .TRUE., then matrix type  will be generated.
!>    Currently, the list of possible types is:
!>
!>    (1)  The zero matrix.
!>    (2)  The identity matrix.
!>    (3)  A (transposed) Jordan block, with 1's on the diagonal.
!>
!>    (4)  A diagonal matrix with evenly spaced entries
!>         1, ..., ULP  and random complex angles.
!>         (ULP = (first number larger than 1) - 1 )
!>    (5)  A diagonal matrix with geometrically spaced entries
!>         1, ..., ULP  and random complex angles.
!>    (6)  A diagonal matrix with  entries 1, ULP, ..., ULP
!>         and random complex angles.
!>
!>    (7)  Same as (4), but multiplied by a constant near
!>         the overflow threshold
!>    (8)  Same as (4), but multiplied by a constant near
!>         the underflow threshold
!>
!>    (9)  A matrix of the form  U' T U, where U is unitary and
!>         T has evenly spaced entries 1, ..., ULP with random complex
!>         angles on the diagonal and random O(1) entries in the upper
!>         triangle.
!>
!>    (10) A matrix of the form  U' T U, where U is unitary and
!>         T has geometrically spaced entries 1, ..., ULP with random
!>         complex angles on the diagonal and random O(1) entries in
!>         the upper triangle.
!>
!>    (11) A matrix of the form  U' T U, where U is unitary and
!>         T has  entries 1, ULP,..., ULP with random
!>         complex angles on the diagonal and random O(1) entries in
!>         the upper triangle.
!>
!>    (12) A matrix of the form  U' T U, where U is unitary and
!>         T has complex eigenvalues randomly chosen from
!>         ULP < |z| < 1   and random O(1) entries in the upper
!>         triangle.
!>
!>    (13) A matrix of the form  X' T X, where X has condition
!>         SQRT( ULP ) and T has evenly spaced entries 1, ..., ULP
!>         with random complex angles on the diagonal and random O(1)
!>         entries in the upper triangle.
!>
!>    (14) A matrix of the form  X' T X, where X has condition
!>         SQRT( ULP ) and T has geometrically spaced entries
!>         1, ..., ULP with random complex angles on the diagonal
!>         and random O(1) entries in the upper triangle.
!>
!>    (15) A matrix of the form  X' T X, where X has condition
!>         SQRT( ULP ) and T has  entries 1, ULP,..., ULP
!>         with random complex angles on the diagonal and random O(1)
!>         entries in the upper triangle.
!>
!>    (16) A matrix of the form  X' T X, where X has condition
!>         SQRT( ULP ) and T has complex eigenvalues randomly chosen
!>         from ULP < |z| < 1 and random O(1) entries in the upper
!>         triangle.
!>
!>    (17) Same as (16), but multiplied by a constant
!>         near the overflow threshold
!>    (18) Same as (16), but multiplied by a constant
!>         near the underflow threshold
!>
!>    (19) Nonsymmetric matrix with random entries chosen from |z| < 1
!>         If N is at least 4, all entries in first two rows and last
!>         row, and first column and last two columns are zero.
!>    (20) Same as (19), but multiplied by a constant
!>         near the overflow threshold
!>    (21) Same as (19), but multiplied by a constant
!>         near the underflow threshold
!>
!>    In addition, an input file will be read from logical unit number
!>    NIUNIT. The file contains matrices along with precomputed
!>    eigenvalues and reciprocal condition numbers for the eigenvalues
!>    and right eigenvectors. For these matrices, in addition to tests
!>    (1) to (9) we will compute the following two tests:
!>
!>   (10)  |RCONDV - RCDVIN| / cond(RCONDV)
!>
!>      RCONDV is the reciprocal right eigenvector condition number
!>      computed by ZGEEVX and RCDVIN (the precomputed true value)
!>      is supplied as input. cond(RCONDV) is the condition number of
!>      RCONDV, and takes errors in computing RCONDV into account, so
!>      that the resulting quantity should be O(ULP). cond(RCONDV) is
!>      essentially given by norm(A)/RCONDE.
!>
!>   (11)  |RCONDE - RCDEIN| / cond(RCONDE)
!>
!>      RCONDE is the reciprocal eigenvalue condition number
!>      computed by ZGEEVX and RCDEIN (the precomputed true value)
!>      is supplied as input.  cond(RCONDE) is the condition number
!>      of RCONDE, and takes errors in computing RCONDE into account,
!>      so that the resulting quantity should be O(ULP). cond(RCONDE)
!>      is essentially given by norm(A)/RCONDV.
!> 

NSIZES

!>          NSIZES is INTEGER
!>          The number of sizes of matrices to use.  NSIZES must be at
!>          least zero. If it is zero, no randomly generated matrices
!>          are tested, but any test matrices read from NIUNIT will be
!>          tested.
!> 

NN

!>          NN is INTEGER array, dimension (NSIZES)
!>          An array containing the sizes to be used for the matrices.
!>          Zero values will be skipped.  The values must be at least
!>          zero.
!> 

NTYPES

!>          NTYPES is INTEGER
!>          The number of elements in DOTYPE. NTYPES must be at least
!>          zero. If it is zero, no randomly generated test matrices
!>          are tested, but and test matrices read from NIUNIT will be
!>          tested. If it is MAXTYP+1 and NSIZES is 1, then an
!>          additional type, MAXTYP+1 is defined, which is to use
!>          whatever matrix is in A.  This is only useful if
!>          DOTYPE(1:MAXTYP) is .FALSE. and DOTYPE(MAXTYP+1) is .TRUE. .
!> 

DOTYPE

!>          DOTYPE is LOGICAL array, dimension (NTYPES)
!>          If DOTYPE(j) is .TRUE., then for each size in NN a
!>          matrix of that size and of type j will be generated.
!>          If NTYPES is smaller than the maximum number of types
!>          defined (PARAMETER MAXTYP), then types NTYPES+1 through
!>          MAXTYP will not be generated.  If NTYPES is larger
!>          than MAXTYP, DOTYPE(MAXTYP+1) through DOTYPE(NTYPES)
!>          will be ignored.
!> 

ISEED

!>          ISEED is INTEGER array, dimension (4)
!>          On entry ISEED specifies the seed of the random number
!>          generator. The array elements should be between 0 and 4095;
!>          if not they will be reduced mod 4096.  Also, ISEED(4) must
!>          be odd.  The random number generator uses a linear
!>          congruential sequence limited to small integers, and so
!>          should produce machine independent random numbers. The
!>          values of ISEED are changed on exit, and can be used in the
!>          next call to ZDRVVX to continue the same random number
!>          sequence.
!> 

THRESH

!>          THRESH is DOUBLE PRECISION
!>          A test will count as  if the , computed as
!>          described above, exceeds THRESH.  Note that the error
!>          is scaled to be O(1), so THRESH should be a reasonably
!>          small multiple of 1, e.g., 10 or 100.  In particular,
!>          it should not depend on the precision (single vs. double)
!>          or the size of the matrix.  It must be at least zero.
!> 

NIUNIT

!>          NIUNIT is INTEGER
!>          The FORTRAN unit number for reading in the data file of
!>          problems to solve.
!> 

NOUNIT

!>          NOUNIT is INTEGER
!>          The FORTRAN unit number for printing out error messages
!>          (e.g., if a routine returns INFO not equal to 0.)
!> 

A

!>          A is COMPLEX*16 array, dimension (LDA, max(NN,12))
!>          Used to hold the matrix whose eigenvalues are to be
!>          computed.  On exit, A contains the last matrix actually used.
!> 

LDA

!>          LDA is INTEGER
!>          The leading dimension of A, and H. LDA must be at
!>          least 1 and at least max( NN, 12 ). (12 is the
!>          dimension of the largest matrix on the precomputed
!>          input file.)
!> 

H

!>          H is COMPLEX*16 array, dimension (LDA, max(NN,12))
!>          Another copy of the test matrix A, modified by ZGEEVX.
!> 

W

!>          W is COMPLEX*16 array, dimension (max(NN,12))
!>          Contains the eigenvalues of A.
!> 

W1

!>          W1 is COMPLEX*16 array, dimension (max(NN,12))
!>          Like W, this array contains the eigenvalues of A,
!>          but those computed when ZGEEVX only computes a partial
!>          eigendecomposition, i.e. not the eigenvalues and left
!>          and right eigenvectors.
!> 

VL

!>          VL is COMPLEX*16 array, dimension (LDVL, max(NN,12))
!>          VL holds the computed left eigenvectors.
!> 

LDVL

!>          LDVL is INTEGER
!>          Leading dimension of VL. Must be at least max(1,max(NN,12)).
!> 

VR

!>          VR is COMPLEX*16 array, dimension (LDVR, max(NN,12))
!>          VR holds the computed right eigenvectors.
!> 

LDVR

!>          LDVR is INTEGER
!>          Leading dimension of VR. Must be at least max(1,max(NN,12)).
!> 

LRE

!>          LRE is COMPLEX*16 array, dimension (LDLRE, max(NN,12))
!>          LRE holds the computed right or left eigenvectors.
!> 

LDLRE

!>          LDLRE is INTEGER
!>          Leading dimension of LRE. Must be at least max(1,max(NN,12))
!> 

RCONDV

!>          RCONDV is DOUBLE PRECISION array, dimension (N)
!>          RCONDV holds the computed reciprocal condition numbers
!>          for eigenvectors.
!> 

RCNDV1

!>          RCNDV1 is DOUBLE PRECISION array, dimension (N)
!>          RCNDV1 holds more computed reciprocal condition numbers
!>          for eigenvectors.
!> 

RCDVIN

!>          RCDVIN is DOUBLE PRECISION array, dimension (N)
!>          When COMP = .TRUE. RCDVIN holds the precomputed reciprocal
!>          condition numbers for eigenvectors to be compared with
!>          RCONDV.
!> 

RCONDE

!>          RCONDE is DOUBLE PRECISION array, dimension (N)
!>          RCONDE holds the computed reciprocal condition numbers
!>          for eigenvalues.
!> 

RCNDE1

!>          RCNDE1 is DOUBLE PRECISION array, dimension (N)
!>          RCNDE1 holds more computed reciprocal condition numbers
!>          for eigenvalues.
!> 

RCDEIN

!>          RCDEIN is DOUBLE PRECISION array, dimension (N)
!>          When COMP = .TRUE. RCDEIN holds the precomputed reciprocal
!>          condition numbers for eigenvalues to be compared with
!>          RCONDE.
!> 

SCALE

!>          SCALE is DOUBLE PRECISION array, dimension (N)
!>          Holds information describing balancing of matrix.
!> 

SCALE1

!>          SCALE1 is DOUBLE PRECISION array, dimension (N)
!>          Holds information describing balancing of matrix.
!> 

WORK

!>          WORK is COMPLEX*16 array, dimension (NWORK)
!> 

RESULT

!>          RESULT is DOUBLE PRECISION array, dimension (11)
!>          The values computed by the seven tests described above.
!>          The values are currently limited to 1/ulp, to avoid
!>          overflow.
!> 

NWORK

!>          NWORK is INTEGER
!>          The number of entries in WORK.  This must be at least
!>          max(6*12+2*12**2,6*NN(j)+2*NN(j)**2) =
!>          max(    360     ,6*NN(j)+2*NN(j)**2)    for all j.
!> 

RWORK

!>          RWORK is DOUBLE PRECISION array, dimension (2*max(NN,12))
!> 

INFO

!>          INFO is INTEGER
!>          If 0,  then successful exit.
!>          If <0, then input parameter -INFO is incorrect.
!>          If >0, ZLATMR, CLATMS, CLATME or ZGET23 returned an error
!>                 code, and INFO is its absolute value.
!>
!>-----------------------------------------------------------------------
!>
!>     Some Local Variables and Parameters:
!>     ---- ----- --------- --- ----------
!>
!>     ZERO, ONE       Real 0 and 1.
!>     MAXTYP          The number of types defined.
!>     NMAX            Largest value in NN or 12.
!>     NERRS           The number of tests which have exceeded THRESH
!>     COND, CONDS,
!>     IMODE           Values to be passed to the matrix generators.
!>     ANORM           Norm of A; passed to matrix generators.
!>
!>     OVFL, UNFL      Overflow and underflow thresholds.
!>     ULP, ULPINV     Finest relative precision and its inverse.
!>     RTULP, RTULPI   Square roots of the previous 4 values.
!>
!>             The following four arrays decode JTYPE:
!>     KTYPE(j)        The general type (1-10) for type .
!>     KMODE(j)        The MODE value to be passed to the matrix
!>                     generator for type .
!>     KMAGN(j)        The order of magnitude ( O(1),
!>                     O(overflow^(1/2) ), O(underflow^(1/2) )
!>     KCONDS(j)       Selectw whether CONDS is to be 1 or
!>                     1/sqrt(ulp).  (0 means irrelevant.)
!> 

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.