Name¶

gxditview - display groff intermediate output files in X11

Synopsis¶

Description¶

gxditview interprets and displays the intermediate output format of groff(1) on an X11 display. It uses the standard X11 fonts, so it does not require access to the server machine for font loading. There are several ways to use gxditview.

The intermediate output format of groff, documented in groff_out(5), is produced by troff or the -Z option to groff. It can be viewed by explicitly calling “gxditview file”. If the file operand is “-”, gxditview will read the standard input stream; file cannot be omitted. The intermediate output format of groff is device-independent but not device-agnostic. gxditview can view it for all typesetter devices, but the quality is device-dependent. gxditview will not display output for terminal (nroff) devices.

The best results are achieved with the X* devices for groff's -T option, of which there are four: -TX75, -TX75-12, -TX100, and -TX100-12. They differ by the X resolution (75 or 100 dots per inch) and the base point size (10 or 12 points). They are especially built for gxditview. When using one of these, groff generates the intermediate output for this device and calls gxditview automatically for viewing.

-X produces good results only with -Tps, -TX75, -TX75-12, -TX100, and -TX100-12. The default resolution for previewing -Tps output is 75dpi; this can be changed with the -resolution option.

While gxditview is running, the left mouse button brings up a menu with several entries.

Next Page

Display the next page.

Previous Page

Display the previous page.

Select Page

Select a particular numbered page specified by a dialog box.

Print

Print the groff intermediate output using a command specified by a dialog box. The default command initially displayed is controlled by the printCommand application resource, and by the -printCommand option.

Open

Open for display a new file specified by a dialog box. The file should contain groff intermediate output. If the filename starts with a bar or pipe symbol, “|” it will be interpreted as a command from which to read.

Quit

Exit from gxditview.

The menu entries correspond to actions with similar but not identical names, which can also be accessed with keyboard accelerators. The n, Space, Return, and Next (PgDn) keys are bound to the NextPage action. The p, b, BackSpace, Delete, and Prior (PgUp) keys are bound to the PreviousPage action. The g key is bound to the SelectPage action. The o key is bound to the OpenFile action. The q key is bound to the Quit action. The r key is bound to a Rerasterize action which rereads the current file, and redisplays the current page; if the current file is a command, the command will be re-executed. Vertical scrolling can be done with the k and j keys; horizontal scrolling is bound to the h and l keys. The arrow keys (up, down, left, and right) are also bound to the obvious scrolling actions.

The paperlength and paperwidth commands in the DESC file describing a groff output device specify the length and width in machine units of the virtual page displayed by gxditview; see groff_font(5).

TR  -adobe-times-medium-r-normal--*-100-*-*-*-*-iso8859-1\n\
TI  -adobe-times-medium-i-normal--*-100-*-*-*-*-iso8859-1\n\
TB  -adobe-times-bold-r-normal--*-100-*-*-*-*-iso8859-1\n\
TBI -adobe-times-bold-i-normal--*-100-*-*-*-*-iso8859-1\n\
CR  -adobe-courier-medium-r-normal--*-100


        -*-*-*-*-iso8859-1\n\
CI  -adobe-courier-medium-o-normal


        --*-100-*-*-*-*-iso8859-1\n\
CB  -adobe-courier-bold-r-normal--*-100-*-*-*-*-iso8859-1\n\
CBI -adobe-courier-bold-o-normal--*-100-*-*-*-*-iso8859-1\n\
HR  -adobe-helvetica-medium-r-normal


        --*-100-*-*-*-*-iso8859-1\n\
HI  -adobe-helvetica-medium-o-normal


        --*-100-*-*-*-*-iso8859-1\n\
HB  -adobe-helvetica-bold-r-normal


        --*-100-*-*-*-*-iso8859-1\n\
HBI -adobe-helvetica-bold-o-normal


        --*-100-*-*-*-*-iso8859-1\n\
NR  -adobe-new century schoolbook-medium-r-normal--*-100


        -*-*-*-*-iso8859-1\n\
NI  -adobe-new century schoolbook-medium-i-normal--*-100


        -*-*-*-*-iso8859-1\n\
NB  -adobe-new century schoolbook-bold-r-normal--*-100


        -*-*-*-*-iso8859-1\n\
NBI -adobe-new century schoolbook-bold-i-normal--*-100


        -*-*-*-*-iso8859-1\n\
S   -adobe-symbol-medium-r-normal--*-100


        -*-*-*-*-adobe-fontspecific\n\
SS  -adobe-symbol-medium-r-normal--*-100


        -*-*-*-*-adobe-fontspecific\n\

Options¶

-help and --help display a usage message, while -version and --version show version information; all exit afterward.

gxditview accepts all of the standard X Toolkit command-line options along with the additional options listed below.

-page

This option specifies the page number of the document to be displayed.

-backingStore backing-store-type

Because redisplay of the groff intermediate output window can take a perceiptible amount of time, this option causes the server to save the window contents so that when it is scrolled around the viewport, the window is painted from contents saved in backing store. backing-store-type can be one of Always, WhenMapped or NotUseful.

-printCommand command

The default command displayed in the dialog box for the Print menu entry will be command.

-resolution res

The groff intermediate output file will be displayed at a resolution of res dots per inch, unless the DESC file contains the X11 command, in which case the device resolution will be used. This corresponds to the Dvi widget's resolution resource. The default is 75.

-filename string

The default filename displayed in the dialog box for the Open menu entry will be string. This can be either a filename, or a command starting with “|”.

The following standard X Toolkit command-line arguments are commonly used with gxditview.

-bg color

This option specifies the color to use for the background of the window. The default is “white”.

-bd color

This option specifies the color to use for the border of the window. The default is “black”.

-bw number

This option specifies the width in pixels of the border surrounding the window.

-fg color

This option specifies the color to use for displaying text. The default is “black”.

-fn font

This option specifies the font to be used for displaying widget text. The default is “fixed”.

-rv

This option indicates that reverse video should be simulated by swapping the foreground and background colors.

-geometry geometry

This option specifies the preferred size and position of the window.

-display host:display

This option specifies the X server to contact.

-xrm resourcestring

This option specifies a resource string to be used.

Environment¶

GROFF_FONT_PATH

A list of directories in which to seek the selected output device's directory of device and font description files. See troff(1) and groff_font(5).

Files¶

/usr/share/X11/app-defaults/GXditview

/usr/share/X11/app-defaults/GXditview-color

define X application defaults for gxditview. Users can override these values in the .Xdefaults file, normally located in the user's home directory. See appres(1) and xrdb(1).

/usr/share/groff/1.23.0/font/devX100/DESC

describes the X100 output device.

/usr/share/groff/1.23.0/font/devX100/F

describes the font known as F on device X100.

/usr/share/groff/1.23.0/font/devX100-12/DESC

describes the X100-12 output device.

/usr/share/groff/1.23.0/font/devX100-12/F

describes the font known as F on device X100-12.

/usr/share/groff/1.23.0/font/devX75/DESC

describes the X75 output device.

/usr/share/groff/1.23.0/font/devX75/F

describes the font known as F on device X75.

/usr/share/groff/1.23.0/font/devX75-12/DESC

describes the X75-12 output device.

/usr/share/groff/1.23.0/font/devX75-12/F

describes the font known as F on device X75-12.

/usr/share/groff/1.23.0/tmac/X.tmac

defines macros for use with the X100, X100-12, X75, and X75-12 output devices. It is automatically loaded by troffrc when any of those output devices is selected.

/usr/share/groff/1.23.0/tmac/Xps.tmac

sets up troff to use gxditview as a previewer for device-independent output targeting the ps output device. It is automatically loaded by troffrc when troff is given the options -X and -Tps.

Examples¶

The following command views this man page with a base point size of 12.

groff -TX100-12 -man gxditview.1

The quality of the result depends mainly on the chosen point size and display resolution; for rapid previewing, however, something like

groff -X -P-resolution -P100 document

Authors¶

gxditview and its predecessor xditview were written by Keith Packard (MIT X Consortium), Richard L. Hyde (Purdue), David Slattengren (Berkeley), Malcolm Slaney (Schlumberger Palo Alto Research), Mark Moraes (University of Toronto), and James Clark.

This program is derived from xditview; portions of xditview originated in xtroff, which was derived from suntroff.

See also¶

“X Logical Font Description Conventions”, by Jim Flowers and Stephen Gildea.

X(7), xrdb(1), xditview(1), groff(1), groff_out(5)