table of contents
GIT-REV-LIST(1) | Git Manual | GIT-REV-LIST(1) |
NAME¶
git-rev-list - Lists commit objects in reverse chronological order
SYNOPSIS¶
git rev-list [<options>] <commit>... [--] [<path>...]
DESCRIPTION¶
List commits that are reachable by following the parent links from the given commit(s), but exclude commits that are reachable from the one(s) given with a ^ in front of them. The output is given in reverse chronological order by default.
You can think of this as a set operation. Commits reachable from any of the commits given on the command line form a set, and then commits reachable from any of the ones given with ^ in front are subtracted from that set. The remaining commits are what comes out in the command’s output. Various other options and paths parameters can be used to further limit the result.
Thus, the following command:
$ git rev-list foo bar ^baz
means "list all the commits which are reachable from foo or bar, but not from baz".
A special notation "<commit1>..<commit2>" can be used as a short-hand for "^<commit1> <commit2>". For example, either of the following may be used interchangeably:
$ git rev-list origin..HEAD $ git rev-list HEAD ^origin
Another special notation is "<commit1>...<commit2>" which is useful for merges. The resulting set of commits is the symmetric difference between the two operands. The following two commands are equivalent:
$ git rev-list A B --not $(git merge-base --all A B) $ git rev-list A...B
rev-list is an essential Git command, since it provides the ability to build and traverse commit ancestry graphs. For this reason, it has a lot of different options that enable it to be used by commands as different as git bisect and git repack.
OPTIONS¶
Commit Limiting¶
Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit limiting may be applied.
Using more options generally further limits the output (e.g. --since=<date1> limits to commits newer than <date1>, and using it with --grep=<pattern> further limits to commits whose log message has a line that matches <pattern>), unless otherwise noted.
Note that these are applied before commit ordering and formatting options, such as --reverse.
-<number>, -n <number>, --max-count=<number>
--skip=<number>
--since=<date>, --after=<date>
--since-as-filter=<date>
--until=<date>, --before=<date>
--max-age=<timestamp>, --min-age=<timestamp>
--author=<pattern>, --committer=<pattern>
--grep-reflog=<pattern>
--grep=<pattern>
--all-match
--invert-grep
-i, --regexp-ignore-case
--basic-regexp
-E, --extended-regexp
-F, --fixed-strings
-P, --perl-regexp
Support for these types of regular expressions is an optional compile-time dependency. If Git wasn’t compiled with support for them providing this option will cause it to die.
--remove-empty
--merges
--no-merges
--min-parents=<number>, --max-parents=<number>, --no-min-parents, --no-max-parents
--no-min-parents and --no-max-parents reset these limits (to no limit) again. Equivalent forms are --min-parents=0 (any commit has 0 or more parents) and --max-parents=-1 (negative numbers denote no upper limit).
--first-parent
--exclude-first-parent-only
--not
--all
--branches[=<pattern>]
--tags[=<pattern>]
--remotes[=<pattern>]
--glob=<glob-pattern>
--exclude=<glob-pattern>
The patterns given should not begin with refs/heads, refs/tags, or refs/remotes when applied to --branches, --tags, or --remotes, respectively, and they must begin with refs/ when applied to --glob or --all. If a trailing /* is intended, it must be given explicitly.
--exclude-hidden=[fetch|receive|uploadpack]
--reflog
--alternate-refs
--single-worktree
--ignore-missing
--stdin
--quiet
--disk-usage, --disk-usage=human
--cherry-mark
--cherry-pick
For example, if you have two branches, A and B, a usual way to list all commits on only one side of them is with --left-right (see the example below in the description of the --left-right option). However, it shows the commits that were cherry-picked from the other branch (for example, “3rd on b” may be cherry-picked from branch A). With this option, such pairs of commits are excluded from the output.
--left-only, --right-only
For example, --cherry-pick --right-only A...B omits those commits from B which are in A or are patch-equivalent to a commit in A. In other words, this lists the + commits from git cherry A B. More precisely, --cherry-pick --right-only --no-merges gives the exact list.
--cherry
-g, --walk-reflogs
With --pretty format other than oneline and reference (for obvious reasons), this causes the output to have two extra lines of information taken from the reflog. The reflog designator in the output may be shown as ref@{<Nth>} (where <Nth> is the reverse-chronological index in the reflog) or as ref@{<timestamp>} (with the <timestamp> for that entry), depending on a few rules:
Under --pretty=oneline, the commit message is prefixed with this information on the same line. This option cannot be combined with --reverse. See also git-reflog(1).
Under --pretty=reference, this information will not be shown at all.
--merge
--boundary
--use-bitmap-index
--progress=<header>
History Simplification¶
Sometimes you are only interested in parts of the history, for example the commits modifying a particular <path>. But there are two parts of History Simplification, one part is selecting the commits and the other is how to do it, as there are various strategies to simplify the history.
The following options select the commits to be shown:
<paths>
--simplify-by-decoration
Note that extra commits can be shown to give a meaningful history.
The following options affect the way the simplification is performed:
Default mode
--show-pulls
--full-history
--dense
--sparse
--simplify-merges
--ancestry-path[=<commit>]
A more detailed explanation follows.
Suppose you specified foo as the <paths>. We shall call commits that modify foo !TREESAME, and the rest TREESAME. (In a diff filtered for foo, they look different and equal, respectively.)
In the following, we will always refer to the same example history to illustrate the differences between simplification settings. We assume that you are filtering for a file foo in this commit graph:
.-A---M---N---O---P---Q
/ / / / / /
I B C D E Y
\ / / / / /
`-------------' X
The horizontal line of history A---Q is taken to be the first parent of each merge. The commits are:
rev-list walks backwards through history, including or excluding commits based on whether --full-history and/or parent rewriting (via --parents or --children) are used. The following settings are available.
Default mode
This results in:
.-A---N---O
/ / /
I---------D
Note how the rule to only follow the TREESAME parent, if one is available, removed B from consideration entirely. C was considered via N, but is TREESAME. Root commits are compared to an empty tree, so I is !TREESAME.
Parent/child relations are only visible with --parents, but that does not affect the commits selected in default mode, so we have shown the parent lines.
--full-history without parent rewriting
I A B N D O P Q
M was excluded because it is TREESAME to both parents. E, C and B were all walked, but only B was !TREESAME, so the others do not appear.
Note that without parent rewriting, it is not really possible to talk about the parent/child relationships between the commits, so we show them disconnected.
--full-history with parent rewriting
Merges are always included. However, their parent list is rewritten: Along each parent, prune away commits that are not included themselves. This results in
.-A---M---N---O---P---Q
/ / / / /
I B / D /
\ / / / /
`-------------'
Compare to --full-history without rewriting above. Note that E was pruned away because it is TREESAME, but the parent list of P was rewritten to contain E's parent I. The same happened for C and N, and X, Y and Q.
In addition to the above settings, you can change whether TREESAME affects inclusion:
--dense
--sparse
Note that without --full-history, this still simplifies merges: if one of the parents is TREESAME, we follow only that one, so the other sides of the merge are never walked.
--simplify-merges
Then simplify each commit C to its replacement C' in the final history according to the following rules:
The effect of this is best shown by way of comparing to --full-history with parent rewriting. The example turns into:
.-A---M---N---O
/ / /
I B D
\ / /
`---------'
Note the major differences in N, P, and Q over --full-history:
There is another simplification mode available:
--ancestry-path[=<commit>]
As an example use case, consider the following commit history:
D---E-------F
/ \ \
B---C---G---H---I---J
/ \
A-------K---------------L--M
A regular D..M computes the set of commits that are ancestors of M, but excludes the ones that are ancestors of D. This is useful to see what happened to the history leading to M since D, in the sense that “what does M have that did not exist in D”. The result in this example would be all the commits, except A and B (and D itself, of course).
When we want to find out what commits in M are contaminated with the bug introduced by D and need fixing, however, we might want to view only the subset of D..M that are actually descendants of D, i.e. excluding C and K. This is exactly what the --ancestry-path option does. Applied to the D..M range, it results in:
E-------F
\ \
G---H---I---J
\
L--M
We can also use --ancestry-path=D instead of --ancestry-path which means the same thing when applied to the D..M range but is just more explicit.
If we instead are interested in a given topic within this range, and all commits affected by that topic, we may only want to view the subset of D..M which contain that topic in their ancestry path. So, using --ancestry-path=H D..M for example would result in:
E
\
G---H---I---J
\
L--M
Whereas --ancestry-path=K D..M would result in
K---------------L--M
Before discussing another option, --show-pulls, we need to create a new example history.
A common problem users face when looking at simplified history is that a commit they know changed a file somehow does not appear in the file’s simplified history. Let’s demonstrate a new example and show how options such as --full-history and --simplify-merges works in that case:
.-A---M-----C--N---O---P
/ / \ \ \/ / /
I B \ R-'`-Z' /
\ / \/ /
\ / /\ /
`---X--' `---Y--'
For this example, suppose I created file.txt which was modified by A, B, and X in different ways. The single-parent commits C, Z, and Y do not change file.txt. The merge commit M was created by resolving the merge conflict to include both changes from A and B and hence is not TREESAME to either. The merge commit R, however, was created by ignoring the contents of file.txt at M and taking only the contents of file.txt at X. Hence, R is TREESAME to X but not M. Finally, the natural merge resolution to create N is to take the contents of file.txt at R, so N is TREESAME to R but not C. The merge commits O and P are TREESAME to their first parents, but not to their second parents, Z and Y respectively.
When using the default mode, N and R both have a TREESAME parent, so those edges are walked and the others are ignored. The resulting history graph is:
I---X
When using --full-history, Git walks every edge. This will discover the commits A and B and the merge M, but also will reveal the merge commits O and P. With parent rewriting, the resulting graph is:
.-A---M--------N---O---P
/ / \ \ \/ / /
I B \ R-'`--' /
\ / \/ /
\ / /\ /
`---X--' `------'
Here, the merge commits O and P contribute extra noise, as they did not actually contribute a change to file.txt. They only merged a topic that was based on an older version of file.txt. This is a common issue in repositories using a workflow where many contributors work in parallel and merge their topic branches along a single trunk: many unrelated merges appear in the --full-history results.
When using the --simplify-merges option, the commits O and P disappear from the results. This is because the rewritten second parents of O and P are reachable from their first parents. Those edges are removed and then the commits look like single-parent commits that are TREESAME to their parent. This also happens to the commit N, resulting in a history view as follows:
.-A---M--.
/ / \
I B R
\ / /
\ / /
`---X--'
In this view, we see all of the important single-parent changes from A, B, and X. We also see the carefully-resolved merge M and the not-so-carefully-resolved merge R. This is usually enough information to determine why the commits A and B "disappeared" from history in the default view. However, there are a few issues with this approach.
The first issue is performance. Unlike any previous option, the --simplify-merges option requires walking the entire commit history before returning a single result. This can make the option difficult to use for very large repositories.
The second issue is one of auditing. When many contributors are working on the same repository, it is important which merge commits introduced a change into an important branch. The problematic merge R above is not likely to be the merge commit that was used to merge into an important branch. Instead, the merge N was used to merge R and X into the important branch. This commit may have information about why the change X came to override the changes from A and B in its commit message.
--show-pulls
When a merge commit is included by --show-pulls, the merge is treated as if it "pulled" the change from another branch. When using --show-pulls on this example (and no other options) the resulting graph is:
I---X---R---N
Here, the merge commits R and N are included because they pulled the commits X and R into the base branch, respectively. These merges are the reason the commits A and B do not appear in the default history.
When --show-pulls is paired with --simplify-merges, the graph includes all of the necessary information:
.-A---M--. N
/ / \ /
I B R
\ / /
\ / /
`---X--'
Notice that since M is reachable from R, the edge from N to M was simplified away. However, N still appears in the history as an important commit because it "pulled" the change R into the main branch.
The --simplify-by-decoration option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME (in other words, kept after history simplification rules described above) if (1) they are referenced by tags, or (2) they change the contents of the paths given on the command line. All other commits are marked as TREESAME (subject to be simplified away).
Bisection Helpers¶
--bisect
$ git rev-list --bisect foo ^bar ^baz
outputs midpoint, the output of the two commands
$ git rev-list foo ^midpoint
$ git rev-list midpoint ^bar ^baz
would be of roughly the same length. Finding the change which introduces a regression is thus reduced to a binary search: repeatedly generate and test new 'midpoint’s until the commit chain is of length one.
--bisect-vars
--bisect-all
This is useful because it makes it easy to choose a good commit to test when you want to avoid to test some of them for some reason (they may not compile for example).
This option can be used along with --bisect-vars, in this case, after all the sorted commit objects, there will be the same text as if --bisect-vars had been used alone.
Commit Ordering¶
By default, the commits are shown in reverse chronological order.
--date-order
--author-date-order
--topo-order
For example, in a commit history like this:
---1----2----4----7
\ \
3----5----6----8---
where the numbers denote the order of commit timestamps, git rev-list and friends with --date-order show the commits in the timestamp order: 8 7 6 5 4 3 2 1.
With --topo-order, they would show 8 6 5 3 7 4 2 1 (or 8 7 4 2 6 5 3 1); some older commits are shown before newer ones in order to avoid showing the commits from two parallel development track mixed together.
--reverse
Object Traversal¶
These options are mostly targeted for packing of Git repositories.
--objects
--in-commit-order
--objects-edge
--objects-edge-aggressive
--indexed-objects
--unpacked
--object-names
--no-object-names
--filter=<filter-spec>
The form --filter=blob:none omits all blobs.
The form --filter=blob:limit=<n>[kmg] omits blobs of size at least n bytes or units. n may be zero. The suffixes k, m, and g can be used to name units in KiB, MiB, or GiB. For example, blob:limit=1k is the same as blob:limit=1024.
The form --filter=object:type=(tag|commit|tree|blob) omits all objects which are not of the requested type.
The form --filter=sparse:oid=<blob-ish> uses a sparse-checkout specification contained in the blob (or blob-expression) <blob-ish> to omit blobs that would not be required for a sparse checkout on the requested refs.
The form --filter=tree:<depth> omits all blobs and trees whose depth from the root tree is >= <depth> (minimum depth if an object is located at multiple depths in the commits traversed). <depth>=0 will not include any trees or blobs unless included explicitly in the command-line (or standard input when --stdin is used). <depth>=1 will include only the tree and blobs which are referenced directly by a commit reachable from <commit> or an explicitly-given object. <depth>=2 is like <depth>=1 while also including trees and blobs one more level removed from an explicitly-given commit or tree.
Note that the form --filter=sparse:path=<path> that wants to read from an arbitrary path on the filesystem has been dropped for security reasons.
Multiple --filter= flags can be specified to combine filters. Only objects which are accepted by every filter are included.
The form --filter=combine:<filter1>+<filter2>+...<filterN> can also be used to combined several filters, but this is harder than just repeating the --filter flag and is usually not necessary. Filters are joined by + and individual filters are %-encoded (i.e. URL-encoded). Besides the + and % characters, the following characters are reserved and also must be encoded: ~!@#$^&*()[]{}\;",<>?'` as well as all characters with ASCII code <= 0x20, which includes space and newline.
Other arbitrary characters can also be encoded. For instance, combine:tree:3+blob:none and combine:tree%3A3+blob%3Anone are equivalent.
--no-filter
--filter-provided-objects
--filter-print-omitted
--missing=<missing-action>
The form --missing=error requests that rev-list stop with an error if a missing object is encountered. This is the default action.
The form --missing=allow-any will allow object traversal to continue if a missing object is encountered. Missing objects will silently be omitted from the results.
The form --missing=allow-promisor is like allow-any, but will only allow object traversal to continue for EXPECTED promisor missing objects. Unexpected missing objects will raise an error.
The form --missing=print is like allow-any, but will also print a list of the missing objects. Object IDs are prefixed with a “?” character.
If some tips passed to the traversal are missing, they will be considered as missing too, and the traversal will ignore them. In case we cannot get their Object ID though, an error will be raised.
--exclude-promisor-objects
--no-walk[=(sorted|unsorted)]
--do-walk
Commit Formatting¶
Using these options, git-rev-list(1) will act similar to the more specialized family of commit log tools: git-log(1), git-show(1), and git-whatchanged(1)
--pretty[=<format>], --format=<format>
See the "PRETTY FORMATS" section for some additional details for each format. When =<format> part is omitted, it defaults to medium.
Note: you can specify the default pretty format in the repository configuration (see git-config(1)).
--abbrev-commit
This should make "--pretty=oneline" a whole lot more readable for people using 80-column terminals.
--no-abbrev-commit
--oneline
--encoding=<encoding>
--expand-tabs=<n>, --expand-tabs, --no-expand-tabs
By default, tabs are expanded in pretty formats that indent the log message by 4 spaces (i.e. medium, which is the default, full, and fuller).
--show-signature
--relative-date
--date=<format>
--date=relative shows dates relative to the current time, e.g. “2 hours ago”. The -local option has no effect for --date=relative.
--date=local is an alias for --date=default-local.
--date=iso (or --date=iso8601) shows timestamps in a ISO 8601-like format. The differences to the strict ISO 8601 format are:
--date=iso-strict (or --date=iso8601-strict) shows timestamps in strict ISO 8601 format.
--date=rfc (or --date=rfc2822) shows timestamps in RFC 2822 format, often found in email messages.
--date=short shows only the date, but not the time, in YYYY-MM-DD format.
--date=raw shows the date as seconds since the epoch (1970-01-01 00:00:00 UTC), followed by a space, and then the timezone as an offset from UTC (a + or - with four digits; the first two are hours, and the second two are minutes). I.e., as if the timestamp were formatted with strftime("%s %z")). Note that the -local option does not affect the seconds-since-epoch value (which is always measured in UTC), but does switch the accompanying timezone value.
--date=human shows the timezone if the timezone does not match the current time-zone, and doesn’t print the whole date if that matches (ie skip printing year for dates that are "this year", but also skip the whole date itself if it’s in the last few days and we can just say what weekday it was). For older dates the hour and minute is also omitted.
--date=unix shows the date as a Unix epoch timestamp (seconds since 1970). As with --raw, this is always in UTC and therefore -local has no effect.
--date=format:... feeds the format ... to your system strftime, except for %s, %z, and %Z, which are handled internally. Use --date=format:%c to show the date in your system locale’s preferred format. See the strftime manual for a complete list of format placeholders. When using -local, the correct syntax is --date=format-local:....
--date=default is the default format, and is based on ctime(3) output. It shows a single line with three-letter day of the week, three-letter month, day-of-month, hour-minute-seconds in "HH:MM:SS" format, followed by 4-digit year, plus timezone information, unless the local time zone is used, e.g. Thu Jan 1 00:00:00 1970 +0000.
--header
--no-commit-header
--commit-header
--parents
--children
--timestamp
--left-right
For example, if you have this topology:
y---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
you would get an output like this:
$ git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbb... 3rd on b
>bbbbbbb... 2nd on b
<aaaaaaa... 3rd on a
<aaaaaaa... 2nd on a
-yyyyyyy... 1st on b
-xxxxxxx... 1st on a
--graph
This enables parent rewriting, see History Simplification above.
This implies the --topo-order option by default, but the --date-order option may also be specified.
--show-linear-break[=<barrier>]
--count
PRETTY FORMATS¶
If the commit is a merge, and if the pretty-format is not oneline, email or raw, an additional line is inserted before the Author: line. This line begins with "Merge: " and the hashes of ancestral commits are printed, separated by spaces. Note that the listed commits may not necessarily be the list of the direct parent commits if you have limited your view of history: for example, if you are only interested in changes related to a certain directory or file.
There are several built-in formats, and you can define additional formats by setting a pretty.<name> config option to either another format name, or a format: string, as described below (see git-config(1)). Here are the details of the built-in formats:
<hash> <title-line>
This is designed to be as compact as possible.
commit <hash> Author: <author>
<title-line>
commit <hash> Author: <author> Date: <author-date>
<title-line>
<full-commit-message>
commit <hash> Author: <author> Commit: <committer>
<title-line>
<full-commit-message>
commit <hash> Author: <author> AuthorDate: <author-date> Commit: <committer> CommitDate: <committer-date>
<title-line>
<full-commit-message>
<abbrev-hash> (<title-line>, <short-author-date>)
This format is used to refer to another commit in a commit message and is the same as --pretty='format:%C(auto)%h (%s, %ad)'. By default, the date is formatted with --date=short unless another --date option is explicitly specified. As with any format: with format placeholders, its output is not affected by other options like --decorate and --walk-reflogs.
From <hash> <date> From: <author> Date: <author-date> Subject: [PATCH] <title-line>
<full-commit-message>
Like email, but lines in the commit message starting with "From " (preceded by zero or more ">") are quoted with ">" so they aren’t confused as starting a new commit.
The raw format shows the entire commit exactly as stored in the commit object. Notably, the hashes are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and parents information show the true parent commits, without taking grafts or history simplification into account. Note that this format affects the way commits are displayed, but not the way the diff is shown e.g. with git log --raw. To get full object names in a raw diff format, use --no-abbrev.
The format:<format-string> format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was >>%s<<%n" would show something like this:
The author of fe6e0ee was Junio C Hamano, 23 hours ago The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
The placeholders are:
%n
%%
%x00
%Cred
%Cgreen
%Cblue
%Creset
%C(...)
%m
%w([<w>[,<i1>[,<i2>]]])
%<( <N> [,trunc|ltrunc|mtrunc])
%<|( <M> )
%>( <N> ), %>|( <M> )
%>>( <N> ), %>>|( <M> )
%><( <N> ), %><|( <M> )
%H
%h
%T
%t
%P
%p
%an
%aN
%ae
%aE
%al
%aL
%ad
%aD
%ar
%at
%ai
%aI
%as
%ah
%cn
%cN
%ce
%cE
%cl
%cL
%cd
%cD
%cr
%ct
%ci
%cI
%cs
%ch
%d
%D
%(decorate[:<options>])
For example, to produce decorations with no wrapping or tag annotations, and spaces as separators:
+ %(decorate:prefix=,suffix=,tag=,separator= )
%(describe[:<options>])
%S
%e
%s
%f
%b
%B
%GG
%G?
%GS
%GK
%GF
%GP
%GT
%gD
%gd
%gn
%gN
%ge
%gE
%gs
%(trailers[:<options>])
Note
Some placeholders may depend on other options given to the revision traversal engine. For example, the %g* reflog options will insert an empty string unless we are traversing reflog entries (e.g., by git log -g). The %d and %D placeholders will use the "short" decoration format if --decorate was not already provided on the command line.
The boolean options accept an optional value [=<bool-value>]. The values true, false, on, off etc. are all accepted. See the "boolean" sub-section in "EXAMPLES" in git-config(1). If a boolean option is given with no value, it’s enabled.
If you add a + (plus sign) after % of a placeholder, a line-feed is inserted immediately before the expansion if and only if the placeholder expands to a non-empty string.
If you add a - (minus sign) after % of a placeholder, all consecutive line-feeds immediately preceding the expansion are deleted if and only if the placeholder expands to an empty string.
If you add a ` ` (space) after % of a placeholder, a space is inserted immediately before the expansion if and only if the placeholder expands to a non-empty string.
The tformat: format works exactly like format:, except that it provides "terminator" semantics instead of "separator" semantics. In other words, each commit has the message terminator character (usually a newline) appended, rather than a separator placed between entries. This means that the final entry of a single-line format will be properly terminated with a new line, just as the "oneline" format does. For example:
$ git log -2 --pretty=format:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/' 4da45be 7134973 -- NO NEWLINE $ git log -2 --pretty=tformat:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/' 4da45be 7134973
In addition, any unrecognized string that has a % in it is interpreted as if it has tformat: in front of it. For example, these two are equivalent:
$ git log -2 --pretty=tformat:%h 4da45bef $ git log -2 --pretty=%h 4da45bef
EXAMPLES¶
git rev-list HEAD
git rev-list @{upstream}..HEAD
git rev-list --format=medium HEAD
git rev-list HEAD | git diff-tree --stdin --format=medium -p
git rev-list HEAD -- Documentation/
git rev-list --author=you@example.com --since=1.year.ago --all
git rev-list --objects HEAD
# reachable objects git rev-list --disk-usage --objects --all # plus reflogs git rev-list --disk-usage --objects --all --reflog # total disk size used du -c .git/objects/pack/*.pack .git/objects/??/* # alternative to du: add up "size" and "size-pack" fields git count-objects -v
git for-each-ref --format='%(refname)' | while read branch do
size=$(git rev-list --disk-usage --objects HEAD..$branch)
echo "$size $branch" done | sort -n
git rev-list --disk-usage --objects --remotes=$suspect --not --remotes=origin
GIT¶
Part of the git(1) suite
11/25/2024 | Git 2.47.1 |