NAME¶

git-pull - Fetch from and integrate with another repository or a local branch

SYNOPSIS¶

git pull [<options>] [<repository> [<refspec>...]]

DESCRIPTION¶

Incorporates changes from a remote repository into the current branch. If the current branch is behind the remote, then by default it will fast-forward the current branch to match the remote. If the current branch and the remote have diverged, the user needs to specify how to reconcile the divergent branches with --rebase or --no-rebase (or the corresponding configuration option in pull.rebase).

More precisely, git pull runs git fetch with the given parameters and then depending on configuration options or command line flags, will call either git rebase or git merge to reconcile diverging branches.

<repository> should be the name of a remote repository as passed to git-fetch(1). <refspec> can name an arbitrary remote ref (for example, the name of a tag) or even a collection of refs with corresponding remote-tracking branches (e.g., refs/heads/*:refs/remotes/origin/*), but usually it is the name of a branch in the remote repository.

Default values for <repository> and <branch> are read from the "remote" and "merge" configuration for the current branch as set by git-branch(1) --track.

Assume the following history exists and the current branch is "master":

          A---B---C master on origin


         /


    D---E---F---G master


        ^


        origin/master in your repository

Then "git pull" will fetch and replay the changes from the remote master branch since it diverged from the local master (i.e., E) until its current commit (C) on top of master and record the result in a new commit along with the names of the two parent commits and a log message from the user describing the changes.

          A---B---C origin/master


         /         \


    D---E---F---G---H master

See git-merge(1) for details, including how conflicts are presented and handled.

In Git 1.7.0 or later, to cancel a conflicting merge, use git reset --merge. Warning: In older versions of Git, running git pull with uncommitted changes is discouraged: while possible, it leaves you in a state that may be hard to back out of in the case of a conflict.

If any of the remote changes overlap with local uncommitted changes, the merge will be automatically canceled and the work tree untouched. It is generally best to get any local changes in working order before pulling or stash them away with git-stash(1).

OPTIONS¶

-q, --quiet

-v, --verbose

--[no-]recurse-submodules[=(yes|on-demand|no)]

GIT URLS¶

In general, URLs contain information about the transport protocol, the address of the remote server, and the path to the repository. Depending on the transport protocol, some of this information may be absent.

Git supports ssh, git, http, and https protocols (in addition, ftp and ftps can be used for fetching, but this is inefficient and deprecated; do not use them).

The native transport (i.e. git:// URL) does no authentication and should be used with caution on unsecured networks.

The following syntaxes may be used with them:

An alternative scp-like syntax may also be used with the ssh protocol:

This syntax is only recognized if there are no slashes before the first colon. This helps differentiate a local path that contains a colon. For example the local path foo:bar could be specified as an absolute path or ./foo:bar to avoid being misinterpreted as an ssh url.

The ssh and git protocols additionally support ~<username> expansion:

For local repositories, also supported by Git natively, the following syntaxes may be used:

These two syntaxes are mostly equivalent, except when cloning, when the former implies --local option. See git-clone(1) for details.

git clone, git fetch and git pull, but not git push, will also accept a suitable bundle file. See git-bundle(1).

When Git doesn’t know how to handle a certain transport protocol, it attempts to use the remote-<transport> remote helper, if one exists. To explicitly request a remote helper, the following syntax may be used:

where <address> may be a path, a server and path, or an arbitrary URL-like string recognized by the specific remote helper being invoked. See gitremote-helpers(7) for details.

If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you use will be rewritten into URLs that work), you can create a configuration section of the form:

        [url "<actual-url-base>"]


                insteadOf = <other-url-base>

For example, with this:

        [url "git://git.host.xz/"]


                insteadOf = host.xz:/path/to/


                insteadOf = work:

a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any context that takes a URL to be "git://git.host.xz/repo.git".

If you want to rewrite URLs for push only, you can create a configuration section of the form:

        [url "<actual-url-base>"]


                pushInsteadOf = <other-url-base>

For example, with this:

        [url "ssh://example.org/"]


                pushInsteadOf = git://example.org/

a URL like "git://example.org/path/to/repo.git" will be rewritten to "ssh://example.org/path/to/repo.git" for pushes, but pulls will still use the original URL.

REMOTES¶

The name of one of the following can be used instead of a URL as <repository> argument:

All of these also allow you to omit the refspec from the command line because they each contain a refspec which git will use by default.

        [remote "<name>"]


                url = <URL>


                pushurl = <pushurl>


                push = <refspec>


                fetch = <refspec>

        URL: one of the above URL formats


        Push: <refspec>


        Pull: <refspec>

        <URL>#<head>

        refs/heads/<head>:refs/heads/<branch>

        HEAD:refs/heads/<head>

MERGE STRATEGIES¶

The merge mechanism (git merge and git pull commands) allows the backend merge strategies to be chosen with -s option. Some strategies can also take their own options, which can be passed by giving -X<option> arguments to git merge and/or git pull.

ort

recursive

resolve

octopus

ours

subtree

With the strategies that use 3-way merge (including the default, ort), if a change is made on both branches, but later reverted on one of the branches, that change will be present in the merged result; some people find this behavior confusing. It occurs because only the heads and the merge base are considered when performing a merge, not the individual commits. The merge algorithm therefore considers the reverted change as no change at all, and substitutes the changed version instead.

DEFAULT BEHAVIOUR¶

Often people use git pull without giving any parameter. Traditionally, this has been equivalent to saying git pull origin. However, when configuration branch.<name>.remote is present while on branch <name>, that value is used instead of origin.

In order to determine what URL to use to fetch from, the value of the configuration remote.<origin>.url is consulted and if there is not any such variable, the value on the URL: line in $GIT_DIR/remotes/<origin> is used.

In order to determine what remote branches to fetch (and optionally store in the remote-tracking branches) when the command is run without any refspec parameters on the command line, values of the configuration variable remote.<origin>.fetch are consulted, and if there aren’t any, $GIT_DIR/remotes/<origin> is consulted and its Pull: lines are used. In addition to the refspec formats described in the OPTIONS section, you can have a globbing refspec that looks like this:

refs/heads/*:refs/remotes/origin/*

A globbing refspec must have a non-empty RHS (i.e. must store what were fetched in remote-tracking branches), and its LHS and RHS must end with /*. The above specifies that all remote branches are tracked using remote-tracking branches in refs/remotes/origin/ hierarchy under the same name.

The rule to determine which remote branch to merge after fetching is a bit involved, in order not to break backward compatibility.

If explicit refspecs were given on the command line of git pull, they are all merged.

When no refspec was given on the command line, then git pull uses the refspec from the configuration or $GIT_DIR/remotes/<origin>. In such cases, the following rules apply:

EXAMPLES¶

$ git pull
$ git pull origin

$ git pull origin next

$ git fetch origin
$ git merge origin/next

If you tried a pull which resulted in complex conflicts and would want to start over, you can recover with git reset.

SECURITY¶

The fetch and push protocols are not designed to prevent one side from stealing data from the other repository that was not intended to be shared. If you have private data that you need to protect from a malicious peer, your best option is to store it in another repository. This applies to both clients and servers. In particular, namespaces on a server are not effective for read access control; you should only grant read access to a namespace to clients that you would trust with read access to the entire repository.

The known attack vectors are as follows:

BUGS¶

Using --recurse-submodules can only fetch new commits in already checked out submodules right now. When e.g. upstream added a new submodule in the just fetched commits of the superproject the submodule itself cannot be fetched, making it impossible to check out that submodule later without having to do a fetch again. This is expected to be fixed in a future Git version.

SEE ALSO¶

git-fetch(1), git-merge(1), git-config(1)

GIT¶

Part of the git(1) suite