DESCRIPTION¶
If REF names an installed application, Flatpak runs the
application in a sandboxed environment. Extra arguments are passed on to the
application. The current branch and arch of the application is used unless
otherwise specified with --branch or --arch. See
flatpak-make-current(1).
If REF names a runtime, a shell is opened in the runtime. This is
useful for development and testing. If there is ambiguity about which branch
to use, you will be prompted to choose. Use --branch to avoid this.
The primary arch is used unless otherwise specified with --arch.
By default, Flatpak will look for the application or runtime in
the per-user installation first, then in all system installations. This can
be overridden with the --user, --system and
--installation options.
Flatpak creates a sandboxed environment for the application to run
in by mounting the right runtime at /usr and a writable directory at /var,
whose content is preserved between application runs. The application itself
is mounted at /app.
The details of the sandboxed environment are controlled by the
application metadata and various options like --share and
--socket that are passed to the run command: Access is allowed if it
was requested either in the application metadata file or with an option and
the user hasn't overridden it.
The remaining arguments are passed to the command that gets run in
the sandboxed environment. See the --file-forwarding option for
handling of file arguments.
Environment variables are generally passed on to the sandboxed
application, with certain exceptions. The application metadata can override
environment variables, as well as the --env option. Apart from that,
Flatpak always unsets or overrides the following variables, since their
session values are likely to interfere with the functioning of the
sandbox:
PATH
LD_LIBRARY_PATH
LD_PRELOAD
LD_AUDIT
XDG_CONFIG_DIRS
XDG_DATA_DIRS
XDG_RUNTIME_DIR
SHELL
TEMP
TEMPDIR
TMP
TMPDIR
PYTHONPATH
PERLLIB
PERL5LIB
XCURSOR_PATH
KRB5CCNAME
XKB_CONFIG_ROOT
GIO_EXTRA_MODULES
GDK_BACKEND
VK_ADD_DRIVER_FILES
VK_ADD_LAYER_PATH
VK_DRIVER_FILES
VK_ICD_FILENAMES
VK_LAYER_PATH
__EGL_EXTERNAL_PLATFORM_CONFIG_DIRS
__EGL_EXTERNAL_PLATFORM_CONFIG_FILENAMES
__EGL_VENDOR_LIBRARY_DIRS
__EGL_VENDOR_LIBRARY_FILENAMES
Also several environment variables with the prefix
"GST_" that are used by gstreamer are unset (since Flatpak
1.12.5).
Flatpak also overrides the XDG environment variables to point
sandboxed applications at their writable filesystem locations below
~/.var/app/$APPID/:
XDG_DATA_HOME
XDG_CONFIG_HOME
XDG_CACHE_HOME
XDG_STATE_HOME (since Flatpak 1.13)
Apps can use the --persist=.local/state and
--unset-env=XDG_STATE_HOME options to get a Flatpak 1.13-compatible
~/.local/state on older versions of Flatpak.
The host values of these variables are made available inside the
sandbox via these HOST_-prefixed variables:
HOST_XDG_DATA_HOME
HOST_XDG_CONFIG_HOME
HOST_XDG_CACHE_HOME
HOST_XDG_STATE_HOME (since Flatpak 1.13)
Flatpak sets the environment variable FLATPAK_ID to the
application ID of the running app.
Flatpak also bind-mounts as read-only the host's /etc/os-release
(if available, or /usr/lib/os-release as a fallback) to /run/host/os-release
in accordance with the os-release specification[1].
If parental controls support is enabled, flatpak will check the
current user’s parental controls settings, and will refuse to run an
app if it is blocklisted for the current user.
OPTIONS¶
The following options are understood:
-h, --help
Show help options and exit.
-u, --user
Look for the application and runtime in per-user
installations.
--system
Look for the application and runtime in the default
system-wide installations.
--installation=NAME
Look for the application and runtime in the system-wide
installation specified by NAME among those defined in
/etc/flatpak/installations.d/. Using --installation=default is
equivalent to using --system.
-v, --verbose
Print debug information during command processing.
--ostree-verbose
Print OSTree debug information during command
processing.
--arch=ARCH
The architecture to run. See flatpak
--supported-arches for architectures supported by the host.
--command=COMMAND
The command to run instead of the one listed in the
application metadata.
--cwd=DIR
The directory to run the command in. Note that this must
be a directory inside the sandbox.
--branch=BRANCH
The branch to use.
-d, --devel
Use the devel runtime that is specified in the
application metadata instead of the regular runtime, and use a seccomp profile
that is less likely to break development tools.
--runtime=RUNTIME
Use this runtime instead of the one that is specified in
the application metadata. This is a full tuple, like for example
org.freedesktop.Sdk/x86_64/1.2, but partial tuples are allowed. Any empty or
missing parts are filled in with the corresponding values specified by the
app.
--runtime-version=VERSION
Use this version of the runtime instead of the one that
is specified in the application metadata. This overrides any version specified
with the --runtime option.
--share=SUBSYSTEM
Share a subsystem with the host session. This overrides
the Context section from the application metadata. SUBSYSTEM must be one of:
network, ipc. This option can be used multiple times.
--unshare=SUBSYSTEM
Don't share a subsystem with the host session. This
overrides the Context section from the application metadata. SUBSYSTEM must be
one of: network, ipc. This option can be used multiple times.
--socket=SOCKET
Expose a well known socket to the application. This
overrides to the Context section from the application metadata. SOCKET must be
one of: x11, wayland, fallback-x11, pulseaudio, system-bus, session-bus,
ssh-auth, pcsc, cups, gpg-agent, inherit-wayland-socket. This option can be
used multiple times.
--nosocket=SOCKET
Don't expose a well known socket to the application. This
overrides to the Context section from the application metadata. SOCKET must be
one of: x11, wayland, fallback-x11, pulseaudio, system-bus, session-bus,
ssh-auth, pcsc, cups, gpg-agent, inherit-wayland-socket. This option can be
used multiple times.
--device=DEVICE
Expose a device to the application. This overrides to the
Context section from the application metadata. DEVICE must be one of: dri,
input, kvm, shm, all. This option can be used multiple times.
--nodevice=DEVICE
Don't expose a device to the application. This overrides
to the Context section from the application metadata. DEVICE must be one of:
dri, input, kvm, shm, all. This option can be used multiple times.
--allow=FEATURE
Allow access to a specific feature. This overrides to the
Context section from the application metadata. FEATURE must be one of: devel,
multiarch, bluetooth. This option can be used multiple times.
See flatpak-build-finish(1) for the meaning of the various
features.
--disallow=FEATURE
Disallow access to a specific feature. This overrides to
the Context section from the application metadata. FEATURE must be one of:
devel, multiarch, bluetooth. This option can be used multiple times.
--filesystem=FILESYSTEM
Allow the application access to a subset of the
filesystem. This overrides to the Context section from the application
metadata. FILESYSTEM can be one of: home, host, host-os, host-etc,
xdg-desktop, xdg-documents, xdg-download, xdg-music, xdg-pictures,
xdg-public-share, xdg-templates, xdg-videos, xdg-run, xdg-config, xdg-cache,
xdg-data, an absolute path, or a homedir-relative path like ~/dir or paths
relative to the xdg dirs, like xdg-download/subdir. The optional :ro suffix
indicates that the location will be read-only. The optional :create suffix
indicates that the location will be read-write and created if it doesn't
exist. This option can be used multiple times. See the "[Context]
filesystems" list in
flatpak-metadata(5) for details of the
meanings of these filesystems.
--nofilesystem=FILESYSTEM
Undo the effect of a previous
--filesystem=FILESYSTEM in the app's manifest and/or the overrides set
up with
flatpak-override(1). This overrides the Context section of the
application metadata. FILESYSTEM can take the same values as for
--filesystem, but the :ro and :create suffixes are not used here. This
option can be used multiple times.
This option does not prevent access to a more narrowly-scoped
--filesystem. For example, if an application has the equivalent of
--filesystem=xdg-config/MyApp in its manifest or as a system-wide
override, and flatpak override --user --nofilesystem=home as a per-user
override, then it will be prevented from accessing most of the home
directory, but it will still be allowed to access
$XDG_CONFIG_HOME/MyApp.
As a special case, --nofilesystem=host:reset will ignore
all --filesystem permissions inherited from the app manifest or
flatpak-override(1), in addition to having the behaviour of
--nofilesystem=host.
--add-policy=SUBSYSTEM.KEY=VALUE
Add generic policy option. For example,
"--add-policy=subsystem.key=v1 --add-policy=subsystem.key=v2" would
map to this metadata:
[Policy subsystem]
key=v1;v2;
This option can be used multiple times.
--remove-policy=SUBSYSTEM.KEY=VALUE
Remove generic policy option. This option can be used
multiple times.
--env=VAR=VALUE
Set an environment variable in the application. This
overrides to the Context section from the application metadata. This option
can be used multiple times.
--unset-env=VAR
Unset an environment variable in the application. This
overrides the unset-environment entry in the [Context] group of the metadata,
and the [Environment] group. This option can be used multiple times.
--env-fd=FD
Read environment variables from the file descriptor
FD, and set them as if via
--env. This can be used to avoid
environment variables and their values becoming visible to other users.
Each environment variable is in the form VAR=VALUE
followed by a zero byte. This is the same format used by env -0 and
/proc/*/environ.
--own-name=NAME
Allow the application to own the well known name NAME on
the session bus. If NAME ends with .*, it allows the application to own all
matching names. This overrides to the Context section from the application
metadata. This option can be used multiple times.
--talk-name=NAME
Allow the application to talk to the well known name NAME
on the session bus. If NAME ends with .*, it allows the application to talk to
all matching names. This overrides to the Context section from the application
metadata. This option can be used multiple times.
--no-talk-name=NAME
Don't allow the application to talk to the well known
name NAME on the session bus. If NAME ends with .*, it allows the application
to talk to all matching names. This overrides to the Context section from the
application metadata. This option can be used multiple times.
--system-own-name=NAME
Allow the application to own the well known name NAME on
the system bus. If NAME ends with .*, it allows the application to own all
matching names. This overrides to the Context section from the application
metadata. This option can be used multiple times.
--system-talk-name=NAME
Allow the application to talk to the well known name NAME
on the system bus. If NAME ends with .*, it allows the application to talk to
all matching names. This overrides to the Context section from the application
metadata. This option can be used multiple times.
--system-no-talk-name=NAME
Don't allow the application to talk to the well known
name NAME on the system bus. If NAME ends with .*, it allows the application
to talk to all matching names. This overrides to the Context section from the
application metadata. This option can be used multiple times.
--persist=FILENAME
If the application doesn't have access to the real
homedir, make the (homedir-relative) path FILENAME a bind mount to the
corresponding path in the per-application directory, allowing that location to
be used for persistent data. This overrides to the Context section from the
application metadata. This option can be used multiple times.
--no-session-bus
Run this instance without the filtered access to the
session dbus connection. Note, this is the default when run with
--sandbox.
--session-bus
Allow filtered access to the session dbus connection.
This is the default, except when run with --sandbox.
In sandbox mode, even if you allow access to the session bus the
sandbox cannot talk to or own the application ids (org.the.App.*) on the bus
(unless explicitly added), only names in the .Sandboxed subset
(org.the.App.Sandboxed.* and
org.mpris.MediaPlayer2.org.the.App.Sandboxed.*).
--no-a11y-bus
Run this instance without the access to the accessibility
bus. Note, this is the default when run with --sandbox.
--a11y-bus
Allow access to the accessibility bus. This is the
default, except when run with --sandbox.
--sandbox
Run the application in sandboxed mode, which means
dropping all the extra permissions it would otherwise have, as well as access
to the session/system/a11y busses and document portal.
--log-session-bus
Log session bus traffic. This can be useful to see what
access you need to allow in your D-Bus policy.
--log-system-bus
Log system bus traffic. This can be useful to see what
access you need to allow in your D-Bus policy.
-p, --die-with-parent
Kill the entire sandbox when the launching process
dies.
--parent-pid=PID
Specifies the pid of the "parent" flatpak, used
by --parent-expose-pids and --parent-share-pids.
--parent-expose-pids
Make the processes of the new sandbox visible in the
sandbox of the parent flatpak, as defined by --parent-pid.
--parent-share-pids
Use the same process ID namespace for the processes of
the new sandbox and the sandbox of the parent flatpak, as defined by
--parent-pid. Implies --parent-expose-pids.
--instance-id-fd
Write the instance ID string to the given file
descriptor.
--file-forwarding
If this option is specified, the remaining arguments are
scanned, and all arguments that are enclosed between a pair of '@@' arguments
are interpreted as file paths, exported in the document store, and passed to
the command in the form of the resulting document path. Arguments between
"@@u" and "@@" are considered URIs, and any
"file:" URIs are exported. The exports are non-persistent and with
read and write permissions for the application.
--app-path=PATH
Instead of mounting the app's content on /app in the
sandbox, mount PATH on /app, and the app's content on /run/parent/app.
If the app has extensions, they will also be redirected into /run/parent/app,
and will not be included in the LD_LIBRARY_PATH inside the
sandbox.
--app-path=
As a special case, --app-path= (with an empty
PATH) results in an empty directory being mounted on /app.
--usr-path=PATH
Instead of mounting the runtime's files on /usr in the
sandbox, mount
PATH on /usr, and the runtime's normal files on
/run/parent/usr. If the runtime has extensions, they will also be redirected
into /run/parent/usr, and will not be included in the
LD_LIBRARY_PATH
inside the sandbox.
This option will usually only be useful if it is combined with
--app-path= and --env=LD_LIBRARY_PATH=....