NAME¶

turbostat - Report processor frequency and idle statistics

SYNOPSIS¶

turbostat [Options] command
turbostat [Options] [--interval seconds]

DESCRIPTION¶

turbostat reports processor topology, frequency, idle power-state statistics, temperature and power on X86 processors. There are two ways to invoke turbostat. The first method is to supply a command, which is forked and statistics are printed in one-shot upon its completion. The second method is to omit the command, and turbostat displays statistics every 5 seconds interval. The 5-second interval can be changed using the --interval option.

Some information is not available on older processors.

	location: {msrDDD | msr0xXXX | /sys/path... | perf/<device>/<event>}
		msrDDD is a decimal offset, eg. msr16
		msr0xXXX is a hex offset, eg. msr0x10
		/sys/path... is an absolute path to a sysfs attribute
		<device> is a perf device from /sys/bus/event_source/devices/<device> eg. cstate_core
		<event> is a perf event for given device from /sys/bus/event_source/devices/<device>/events/<event> eg. c1-residency
			perf/cstate_core/c1-residency would then use /sys/bus/event_source/devices/cstate_core/events/c1-residency
	scope: {cpu | core | package}
		sample and print the counter for every cpu, core, or package.
		default: cpu
	size: {u32 | u64 }
		MSRs are read as 64-bits, u32 truncates the displayed value to 32-bits.
		default: u64
	format: {raw | delta | percent}
		'raw' shows the MSR contents in hex.
		'delta' shows the difference in values during the measurement interval.
		'percent' shows the delta as a percentage of the cycles elapsed.
		default: delta
	name: "name_string"
		Any string that does not match a key-word above is used
		as the column header.

	name="name_string"
		For column header.
	type={raw}
		'raw' shows the counter contents in hex.
		default: raw
	format={raw | delta}
		'raw' shows the counter contents in hex.
		'delta' shows the difference in values during the measurement interval.
		default: raw
	domain={cpu%u | core%u | package%u}
		'cpu' per cpu/thread counter.
		'core' per core counter.
		'package' per package counter.
		'%u' denotes id of the domain that the counter is associated with. For example core4 would mean that the counter is associated with core number 4.
	offset=%u
		'%u' offset within the PMT MMIO region.
	lsb=%u
		'%u' least significant bit within the 64 bit value read from 'offset'. Together with 'msb', used to form a read mask.
	msb=%u
		'%u' most significant bit within the 64 bit value read from 'offset'. Together with 'lsb', used to form a read mask.
	guid=%x
		'%x' hex identifier of the PMT MMIO region.

ROW DESCRIPTIONS¶

The system configuration dump (if --quiet is not used) is followed by statistics. The first row of the statistics labels the content of each column (below). The second row of statistics is the system summary line. The system summary line has a '-' in the columns for the Package, Core, and CPU. The contents of the system summary line depends on the type of column. Columns that count items (eg. IRQ) show the sum across all CPUs in the system. Columns that show a percentage show the average across all CPUs in the system. Columns that dump raw MSR values simply show 0 in the summary. After the system summary row, each row describes a specific Package/Core/CPU. Note that if the --cpu parameter is used to limit which specific CPUs are displayed, turbostat will still collect statistics for all CPUs in the system and will still show the system summary for all CPUs in the system.

COLUMN DESCRIPTIONS¶

usec For each CPU, the number of microseconds elapsed during counter collection, including thread migration -- if any. This counter is disabled by default, and is enabled with "--enable usec", or --debug. On the summary row, usec refers to the total elapsed time to collect the counters on all cpus.

Time_Of_Day_Seconds For each CPU, the gettimeofday(2) value (seconds.subsec since Epoch) when the counters ending the measurement interval were collected. This column is disabled by default, and can be enabled with "--enable Time_Of_Day_Seconds" or "--debug". On the summary row, Time_Of_Day_Seconds refers to the timestamp following collection of counters on the last CPU.

Core processor core number. Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).

CPU Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together.

Package processor package number -- not present on systems with a single processor package.

Avg_MHz number of cycles executed divided by time elapsed. Note that this includes idle-time when 0 instructions are executed.

Busy% percent of the measurement interval that the CPU executes instructions, aka. % of time in "C0" state.

Bzy_MHz average clock rate while the CPU was not idle (ie. in "c0" state).

TSC_MHz average MHz that the TSC ran during the entire interval.

IRQ The number of interrupts serviced by that CPU during the measurement interval. The system total line is the sum of interrupts serviced across all CPUs. turbostat parses /proc/interrupts to generate this summary.

SMI The number of System Management Interrupts serviced CPU during the measurement interval. While this counter is actually per-CPU, SMI are triggered on all processors, so the number should be the same for all CPUs.

C1, C2, C3... The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system.

C1%, C2%, C3% The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved.

CPU%c1, CPU%c3, CPU%c6, CPU%c7 show the percentage residency in hardware core idle states. These numbers are from hardware residency counters.

CoreTmp Degrees Celsius reported by the per-core Digital Thermal Sensor.

PkgTmp Degrees Celsius reported by the per-package Package Thermal Monitor.

GFX%rc6 The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms or /sys/class/drm/card0/gt/gt0/rc6_residency_ms or /sys/class/drm/card0/device/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver being used.

GFXMHz Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the graphics driver being used.

GFXAMHz Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz or /sys/class/drm/card0/gt_act_freq_mhz or /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/act_freq depending on the graphics driver being used.

SAM%mc6 The percentage of time the SA Media is in the "module C6" state, mc6, during the measurement interval. From /sys/class/drm/card0/gt/gt1/rc6_residency_ms or /sys/class/drm/card0/device/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver being used.

SAMMHz Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the graphics driver being used.

SAMAMHz Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/act_freq depending on the graphics driver being used.

Pkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7 percentage residency in hardware package idle states. These numbers are from hardware residency counters.

PkgWatt Watts consumed by the whole package.

CorWatt Watts consumed by the core part of the package.

GFXWatt Watts consumed by the Graphics part of the package -- available only on client processors.

RAMWatt Watts consumed by the DRAM DIMMS -- available only on server processors.

PKG_% percent of the interval that RAPL throttling was active on the Package. Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system. Note that the meaning of this field is model specific. For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits. Comparing PkgWatt and PkgTmp to system limits is necessary.

RAM_% percent of the interval that RAPL throttling was active on DRAM.

UncMHz per-package uncore MHz, instantaneous sample.

UMHz1.0 per-package uncore MHz for domain=1 and fabric_cluster=0, instantaneous sample. System summary is the average of all packages.

TOO MUCH INFORMATION EXAMPLE¶

By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters. This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug.

When you are not interested in all that information, and there are several ways to see only what you want. First the "--quiet" option will skip the configuration information, and turbostat will show only the counter columns. Second, you can reduce the columns with the "--hide" and "--show" options. If you use the "--show" option, then turbostat will show only the columns you list. If you use the "--hide" option, turbostat will show all columns, except the ones you list.

To find out what columns are available for --show and --hide, the "--list" option is available. Usually, the CATEGORY names above are used to refer to groups of counters. Also, for convenience, the special string "sysfs" can be used to refer to all of the sysfs C-state counters at once:

sudo ./turbostat --show sysfs --quiet sleep 10
10.003837 sec
	C1	C1E	C3	C6	C7s	C1%	C1E%	C3%	C6%	C7s%
	4	21	2	2	459	0.14	0.82	0.00	0.00	98.93
	1	17	2	2	130	0.00	0.02	0.00	0.00	99.80
	0	0	0	0	31	0.00	0.00	0.00	0.00	99.95
	2	1	0	0	52	1.14	6.49	0.00	0.00	92.21
	1	2	0	0	52	0.00	0.08	0.00	0.00	99.86
	0	0	0	0	71	0.00	0.00	0.00	0.00	99.89
	0	0	0	0	25	0.00	0.00	0.00	0.00	99.96
	0	0	0	0	74	0.00	0.00	0.00	0.00	99.94
	0	1	0	0	24	0.00	0.00	0.00	0.00	99.84

ONE SHOT COMMAND EXAMPLE¶

If turbostat is invoked with a command, it will fork that command and output the statistics gathered after the command exits. In this case, turbostat output goes to stderr, by default. Output can instead be saved to a file using the --out option. In this example, the "sleep 10" command is forked, and turbostat waits for it to complete before saving all statistics into "ts.out". Note that "sleep 10" is not part of turbostat, but is simply an example of a command that turbostat can fork. The "ts.out" file is what you want to edit in a very wide window, paste into a spreadsheet, or attach to a bugzilla entry.

[root@hsw]# ./turbostat -o ts.out sleep 10
[root@hsw]#

PERIODIC INTERVAL EXAMPLE¶

Without a command to fork, turbostat displays statistics ever 5 seconds. Periodic output goes to stdout, by default, unless --out is used to specify an output file. The 5-second interval can be changed with the "-i sec" option.

sudo turbostat --quiet --show CPU,frequency
	Core	CPU	Avg_MHz	Busy%	Bzy_MHz	TSC_MHz	CPU%c7	UncMhz
	-	-	524	12.48	4198	3096	74.53	3800
	0	0	4	0.09	4081	3096	98.88	3800
	0	4	1	0.02	4063	3096
	1	1	2	0.06	4063	3096	99.60
	1	5	2	0.05	4070	3096
	2	2	4178	99.52	4199	3096	0.00
	2	6	3	0.08	4159	3096
	3	3	1	0.04	4046	3096	99.66
	3	7	0	0.01	3989	3096
	Core	CPU	Avg_MHz	Busy%	Bzy_MHz	TSC_MHz	CPU%c7	UncMhz
	-	-	525	12.52	4198	3096	74.54	3800
	0	0	4	0.10	4051	3096	99.49	3800
	0	4	2	0.04	3993	3096
	1	1	3	0.07	4054	3096	99.56
	1	5	4	0.10	4018	3096
	2	2	4178	99.51	4199	3096	0.00
	2	6	4	0.09	4143	3096
	3	3	2	0.06	4026	3096	99.10
	3	7	7	0.17	4074	3096

This example also shows the use of the --show option to show only the desired columns.

SYSTEM CONFIGURATION INFORMATION EXAMPLE¶

By default, turbostat always dumps system configuration information before taking measurements. In the example above, "--quiet" is used to suppress that output. Here is an example of the configuration information:

turbostat version 2022.04.16 - Len Brown <lenb@kernel.org>
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00001-ge6891250e3b5 ...
CPUID(0): GenuineIntel 0x16 CPUID levels
CPUID(1): family:model:stepping 0x6:9e:9 (6:158:9) microcode 0xea
CPUID(0x80000000): max_extended_levels: 0x80000008
CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM
CPUID(6): APERF, TURBO, DTS, PTM, HWP, HWPnotify, HWPwindow, HWPepp, No-HWPpkg, EPB
cpu7: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
CPUID(7): SGX
cpu7: MSR_IA32_FEATURE_CONTROL: 0x00000005 (Locked )
CPUID(0x15): eax_crystal: 2 ebx_tsc: 258 ecx_crystal_hz: 0
TSC: 3096 MHz (24000000 Hz * 258 / 2 / 1000000)
CPUID(0x16): base_mhz: 3100 max_mhz: 4200 bus_mhz: 100
cpu7: MSR_MISC_PWR_MGMT: 0x00401cc0 (ENable-EIST_Coordination DISable-EPB DISable-OOB)
RAPL: 5825 sec. Joule Counter Range, at 45 Watts
cpu7: MSR_PLATFORM_INFO: 0x80839f1011f00
8 * 100.0 = 800.0 MHz max efficiency frequency
31 * 100.0 = 3100.0 MHz base frequency
cpu7: MSR_IA32_POWER_CTL: 0x002c005d (C1E auto-promotion: DISabled)
cpu7: MSR_TURBO_RATIO_LIMIT: 0x2728292a
39 * 100.0 = 3900.0 MHz max turbo 4 active cores
40 * 100.0 = 4000.0 MHz max turbo 3 active cores
41 * 100.0 = 4100.0 MHz max turbo 2 active cores
42 * 100.0 = 4200.0 MHz max turbo 1 active cores
cpu7: MSR_CONFIG_TDP_NOMINAL: 0x0000001f (base_ratio=31)
cpu7: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 ()
cpu7: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 ()
cpu7: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1)
cpu7: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0)
cpu7: MSR_PKG_CST_CONFIG_CONTROL: 0x1e008008 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, locked, pkg-cstate-limit=8 (unlimited))
Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz)
/dev/cpu_dma_latency: 2000000000 usec (default)
current_driver: intel_idle
current_governor: menu
current_governor_ro: menu
cpu7: POLL: CPUIDLE CORE POLL IDLE
cpu7: C1: MWAIT 0x00
cpu7: C1E: MWAIT 0x01
cpu7: C3: MWAIT 0x10
cpu7: C6: MWAIT 0x20
cpu7: C7s: MWAIT 0x33
cpu7: C8: MWAIT 0x40
cpu7: C9: MWAIT 0x50
cpu7: C10: MWAIT 0x60
cpu7: cpufreq driver: intel_pstate
cpu7: cpufreq governor: performance
cpufreq intel_pstate no_turbo: 0
cpu7: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch)
cpu0: MSR_PM_ENABLE: 0x00000001 (HWP)
cpu0: MSR_HWP_CAPABILITIES: 0x01101f53 (high 83 guar 31 eff 16 low 1)
cpu0: MSR_HWP_REQUEST: 0x00005353 (min 83 max 83 des 0 epp 0x0 window 0x0 pkg 0x0)
cpu0: MSR_HWP_INTERRUPT: 0x00000001 (EN_Guaranteed_Perf_Change, Dis_Excursion_Min)
cpu0: MSR_HWP_STATUS: 0x00000004 (No-Guaranteed_Perf_Change, No-Excursion_Min)
cpu0: EPB: 6 (balanced)
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
cpu0: MSR_PKG_POWER_INFO: 0x00000168 (45 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
cpu0: MSR_PKG_POWER_LIMIT: 0x42820800218208 (UNlocked)
cpu0: PKG Limit #1: ENabled (65.000 Watts, 64.000000 sec, clamp ENabled)
cpu0: PKG Limit #2: ENabled (65.000 Watts, 0.002441* sec, clamp DISabled)
cpu0: MSR_VR_CURRENT_CONFIG: 0x00000000
cpu0: PKG Limit #4: 0.000000 Watts (UNlocked)
cpu0: MSR_DRAM_POWER_LIMIT: 0x5400de00000000 (UNlocked)
cpu0: DRAM Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_PP0_POLICY: 0
cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: Cores Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_PP1_POLICY: 0
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: GFX Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00640000 (100 C) (100 default - 0 offset)
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88200800 (68 C)
cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
cpu7: MSR_PKGC3_IRTL: 0x0000884e (valid, 79872 ns)
cpu7: MSR_PKGC6_IRTL: 0x00008876 (valid, 120832 ns)
cpu7: MSR_PKGC7_IRTL: 0x00008894 (valid, 151552 ns)
cpu7: MSR_PKGC8_IRTL: 0x000088fa (valid, 256000 ns)
cpu7: MSR_PKGC9_IRTL: 0x0000894c (valid, 339968 ns)
cpu7: MSR_PKGC10_IRTL: 0x00008bf2 (valid, 1034240 ns)

The max efficiency frequency, a.k.a. Low Frequency Mode, is the frequency available at the minimum package voltage. The TSC frequency is the base frequency of the processor -- this should match the brand string in /proc/cpuinfo. This base frequency should be sustainable on all CPUs indefinitely, given nominal power and cooling. The remaining rows show what maximum turbo frequency is possible depending on the number of idle cores. Note that not all information is available on all processors.

ADD COUNTER EXAMPLE¶

Here we limit turbostat to showing just the CPU number for cpu0 - cpu3. We add a counter showing the 32-bit raw value of MSR 0x199 (MSR_IA32_PERF_CTL), labeling it with the column header, "PRF_CTRL", and display it only once, after the conclusion of a 0.1 second sleep.

sudo ./turbostat --quiet --cpu 0-3 --show CPU --add msr0x199,u32,raw,PRF_CTRL sleep .1
0.101604 sec
CPU	  PRF_CTRL
-	0x00000000
0	0x00000c00
1	0x00000800
2	0x00000a00
3	0x00000800

ADD PERF COUNTER EXAMPLE¶

Here we limit turbostat to showing just the CPU number for cpu0 - cpu3. We add a counter showing time spent in C1 core cstate, labeling it with the column header, "pCPU%c1", and display it only once, after the conclusion of 0.1 second sleep. We also show CPU%c1 built-in counter that should show similar values.

sudo ./turbostat --quiet --cpu 0-3 --show CPU,CPU%c1 --add perf/cstate_core/c1-residency,cpu,delta,percent,pCPU%c1 sleep .1
0.102448 sec
CPU     pCPU%c1 CPU%c1
-       34.89   34.89
0       45.99   45.99
1       45.94   45.94
2       23.83   23.83
3       23.84   23.84

ADD PMT COUNTER EXAMPLE¶

Here we limit turbostat to showing just the CPU number 0. We add two counters, showing crystal clock count and the DC6 residency. All the parameters passed are based on the metadata found in the PMT XML files.

For the crystal clock count, we label it with the column header, "XTAL", we set the type to 'raw', to read the number of clock ticks in hex, we set the format to 'delta', to display the difference in ticks during the measurement interval, we set the domain to 'package0', to collect it and associate it with the whole package number 0, we set the offset to '0', which is a offset of the counter within the PMT MMIO region, we set the lsb and msb to cover all 64 bits of the read 64 bit value, and finally we set the guid to '0x1a067102', that identifies the PMT MMIO region to which the 'offset' is applied to read the counter value.

For the DC6 residency counter, we label it with the column header, "Die%c6", we set the type to 'txtal_time', to obtain the percent residency value we set the format to 'delta', to display the difference in ticks during the measurement interval, we set the domain to 'package0', to collect it and associate it with the whole package number 0, we set the offset to '0', which is a offset of the counter within the PMT MMIO region, we set the lsb and msb to cover all 64 bits of the read 64 bit value, and finally we set the guid to '0x1a067102', that identifies the PMT MMIO region to which the 'offset' is applied to read the counter value.

sudo ./turbostat --quiet --cpu 0 --show CPU --add pmt,name=XTAL,type=raw,format=delta,domain=package0,offset=0,lsb=0,msb=63,guid=0x1a067102 --add pmt,name=Die%c6,type=txtal_time,format=delta,domain=package0,offset=120,lsb=0,msb=63,guid=0x1a067102
0.104352 sec
CPU                   XTAL      Die%c6
-       0x0000006d4d957ca7      0.00
0       0x0000006d4d957ca7      0.00
0.102448 sec

INPUT¶

For interval-mode, turbostat will immediately end the current interval when it sees a newline on standard input. turbostat will then start the next interval. Control-C will be send a SIGINT to turbostat, which will immediately abort the program with no further processing.

SIGNALS¶

SIGINT will interrupt interval-mode. The end-of-interval data will be collected and displayed before turbostat exits.

SIGUSR1 will end current interval, end-of-interval data will be collected and displayed before turbostat starts a new interval.

NOTES¶

turbostat must be run as root. Alternatively, non-root users can be enabled to run turbostat this way:

# setcap cap_sys_admin,cap_sys_rawio,cap_sys_nice=+ep path/to/turbostat

# chmod +r /dev/cpu/*/msr

# chmod +r /dev/cpu_dma_latency

turbostat reads hardware counters, but doesn't write them. So it will not interfere with the OS or other programs, including multiple invocations of itself.

turbostat may work poorly on Linux-2.6.20 through 2.6.29, as acpi-cpufreq periodically cleared the APERF and MPERF MSRs in those kernels.

AVG_MHz = APERF_delta/measurement_interval. This is the actual number of elapsed cycles divided by the entire sample interval -- including idle time. Note that this calculation is resilient to systems lacking a non-stop TSC.

TSC_MHz = TSC_delta/measurement_interval. On a system with an invariant TSC, this value will be constant and will closely match the base frequency value shown in the brand string in /proc/cpuinfo. On a system where the TSC stops in idle, TSC_MHz will drop below the processor's base frequency.

Busy% = MPERF_delta/TSC_delta

Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval

Note that these calculations depend on TSC_delta, so they are not reliable during intervals when TSC_MHz is not running at the base frequency.

Turbostat data collection is not atomic. Extremely short measurement intervals (much less than 1 second), or system activity that prevents turbostat from being able to run on all CPUS to quickly collect data, will result in inconsistent results.

The APERF, MPERF MSRs are defined to count non-halted cycles. Although it is not guaranteed by the architecture, turbostat assumes that they count at TSC rate, which is true on all processors tested to date.

REFERENCES¶

Volume 3B: System Programming Guide" https://www.intel.com/products/processor/manuals/

FILES¶

/dev/cpu/*/msr

SEE ALSO¶

msr(4), vmstat(8)

AUTHOR¶

Written by Len Brown <len.brown@intel.com>