entry block¶

The content of an entry block is included in the output file when blogc(1) is called without -l option, and with only one source file. It is used to render a single entry of your blog/website. All the variables defined in the source file are available inside this block (see blogc-source(7)), and will override global variables (see blogc(1)).

This is how an entry block is defined:

{% block entry %}
This content will only be included when rendering a single entry.
{% endblock %}

listing block¶

The content of a listing block is included in the output file when blogc(1) is called with -l option, and with zero or more source files. It is used to create a listing of entries, and its content will be included once for each given source file (in the order that the source files were provided to blogc(1)). All the variables defined in the source files are available inside this block (see blogc-source(7)), and will override global variables (see blogc(1)). The variables will be provided by each file, when blogc(1) iterates over them.

This is how a listing block is defined:

{% block listing %}
This content will be only included when rendering an entry listing, and
will be included once for each entry.
{% endblock %}

listing_empty block¶

This block is similar to the listing block, but its content is included only when there are no entries to be listed, either because no source files were provided or because there are no entries remaining after filtering (see blogc-pagination(7)).

This is how a listing_empty block is defined:

{% block listing_empty %}
No entries available.
{% endblock %}

listing_entry block¶

This block is identical to the entry block, but its content is included in the output file only when blogc(1) is called with -l and -e SOURCE options. The variables available in the block are provided by the source file provided using -e SOURCE option.

This is how a listing_entry block is defined:

{% block listing_entry %}
This content will only be included when rendering a listing, but with
content provided by a single entry.
{% endblock %}

When multiple listing_entry blocks are defined, blogc(1) should be called with multiple -e SOURCE options. If a listing_entry block does not have a corresponding -e SOURCE option, or if its value is an empty string, the content of the listing_entry block is not included.

listing_entry blocks inside iterator are evaluated as multiple blocks and also require multiple -e SOURCE options. blogc(1) won´t use the same source for every iteration.

listing_once block¶

The content of a listing_once block is included in the output file when blogc(1) is called with -l option, and with zero or more source files. It is like a listing block, but is only called once, and does not have access to the local variables defined in the source files. It is useful to add something before an entry listing.

The content of a listing_once block is included even if no source file is provided.

This is how a listing_once block is defined:

{% block listing_once %}
This content will be only included when rendering an entry listing, but
will be included only once.
{% endblock %}

This is a ´real world´ usage example of a listing_once block, supposing that the TITLE variable is defined:

{% block listing_once %}
<ul>
{% endblock %}
{% block listing %}
<li>{{ TITLE }}</li>
{% endblock %}
{% block listing_once %}
</ul>
{% endblock %}

Variable formatters¶

blogc(1) can apply a formatter to a variable, depending on how it is called in the template. If user append _FORMATTED to the end of the variable name, a formatter will be applied, if available for the variable name:

•

Date formatter: if variable name starts with DATE_, it is formatted with a strftime(3) format, provided by DATE_FORMAT variable. The DATE_FORMATTED "meta-variable" will return the formatted version of the DATE variable. If DATE_FORMAT is not provided, the original value will be returned.

An existing variable is not overrided by formatter. That means that if FOO_FORMATTED variable exists, it won´t be handled as a formatter "meta-variable", and FOO_FORMATTED variable value will be returned normally.

Truncated variables¶

blogc(1) can truncate the value of a variable to a maximum length, if it is called with the maximum length appended to the end of the variable, like: FOO_5 will return the 5 first characters of the FOO variable, if bigger than 5 characters.

This is applicable to the "meta-variables", like DATE_FORMATTED. It can be truncated like: DATE_FORMATTED_5, that will return the 5 first characters of the DATE_FORMATTED "meta-variable".

An existing variable is not overrided by the truncate syntax. That means that if FOO_5 variable exists, it won´t be handled as a truncate "meta-variable", and FOO_5 variable value will be returned normally.

Static variables¶

These variables are always available, and are set during the blogc(1) binary compilation.

BLOGC_VERSION

The version of blogc(1) used to build. e.g.: blogc 0.14.1.

Resource usage variables¶

It is not possible to measure the resource usage of blogc(1) until the end of the execution, because the rendering of these variables itself is using resources, and the evaluation of the used resources was already done. To get better values, it is recommended to use these variables only in the website footer.

BLOGC_RUSAGE_CPU_TIME

The CPU time used to build, up to the point where this variable was used for the first time in the template (value is cached). e.g.: 12.345ms.

BLOGC_RUSAGE_MEMORY

The memory used to build, up to the point where this variable was used for the first time in the template (value is cached). e.g.: 1.234MB.

System information variables¶

BLOGC_SYSINFO_HOSTNAME

The hostname of the machine where the build happened (short hostname only, not FQDN).

BLOGC_SYSINFO_USERNAME

The username of the user that executed the build.

BLOGC_SYSINFO_DATETIME

The GMT datetime of the build. e.g. 2019-02-10 22:00:00.

BLOGC_SYSINFO_INSIDE_DOCKER

If built inside a docker container, this variable will be defined, with value 1.

ifdef conditional¶

The content of an ifdef conditional is included in the output file when the given variable is defined in the current scope.

This is how an ifdef conditional is defined in a template:

{% ifdef TITLE %}
This is title: {{ TITLE }}
{% else %}
Untitled entry
{% endif %}

In this case, if the TITLE variable is defined, the content after the statement is included. Otherwise, the content after else statement is included.

ifndef conditional¶

The content of an ifndef conditional is included in the output file when the given variable is not defined in the current scope.

This is how an ifndef conditional is defined in a template:

{% ifndef TITLE %}
Untitled entry
{% endif %}

In this case, if the TITLE variable is not defined, the content is included. else statements are supported here, even if it does not makes much sense to be used this way.

if conditional¶

The content of an if conditional is included in the output file when the comparision between the given variable and the given static string or variable evaluates to true in the current scope. The left operand of the comparision must be a variable.

The available operators are: ==, !=, <, >, <= and >=. The comparisions are strcmp(3)-like.

This is how an if conditional is defined in a template:

{% if TITLE == "My Title" %}
Special description of "My Title"
{% else %}
Title is {{ TITLE }}
{% endif %}

Or:

{% if TITLE == DEFAULT_TITLE %}
Title is the default title
{% endif %}

foreach iterator¶

The content of a foreach iterator is included in the output file when the target variable is defined, and is repeated for each item in the list parsed from the variable value.

The variable value should be formatted as a space-separated list of items. Quotes are not supported, as this is intended to work with identifiers, like slugs, and not with arbitrary strings.

This is how a variable value would be formatted:

item1 item2 item3

For more info about how to define variables, see blogc(1) and blogc-source(7).

This is how a foreach iterator is defined in a template:

{% foreach TAGS %}
<a href="/tag/{{ FOREACH_ITEM }}/">{{ FOREACH_ITEM }}</a>
{% endforeach %}

Where TAGS is the variable with space-separated list of items, and FOREACH_ITEM is the variable defined by blogc(1), that will store the item value for a given iteration.

If the value of the TAGS variable is "item1 item2 item3", this template is rendered 3 times, one for each item value.

The FOREACH_ITEM variable can be truncated, like:

{% foreach TAGS %}
<a href="/tag/{{ FOREACH_ITEM }}/">{{ FOREACH_ITEM_5 }}</a>
{% endforeach %}