1. Manuals
  2. Tumbleweed
  3. OpenIPMI
  4. solterm(1)

Scroll to navigation

solterm(1) IPMI Serial over LAN program solterm(1)

NAME

solterm - An IPMI Serial over LAN program

SYNOPSIS

solterm

<connection parms> [-e escape_char] [-notencrypted] [-notauthenticated] [-bitrate (9600|19200|38400|57600|115200)] [-alerts (succeed|defer|fail)] [-holdoff] [-ack-retries n] [-ack-timeout microseconds] [-v] [-q]

DESCRIPTION

The solterm program allows a user to make a remote serial connection over IPMI. The requires that the remote system support IPMI 2.0 Serial Over LAN.

OPTIONS

<connection parms>
The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)

The character to use to escape, or exit, the program. Entering this chatacter right after a newline is entered causes the program to go into command mode. A single character after this performs a command. The default escape character is "~" as shown below. Suppported commands are:
~.
Terminate the program
~B
Send a serial BREAK over the connection
~F
Flush all buffers
~R
Assert the Ring Indicator (RI) line
~r
Deassert the Ring Indicator (RI) line
~D
Assert DCD and DSR lines
~d
Deassert DCD and DSR lines
~C
Pause the output using CTS
~c
Put CTS under BMC control
~?
Help on escape commands
~~
Enter the escape character twice to send it.

Do not encrypt the SOL data going over the connection.

Do not do integrity checks on the SOL data going over the connection.

Set the bitrate to the given value. The default is whatever the BMC has set it to.

This specifies what to do if a alert that requires a callout occurs on the line.
specifies that serial/modem alerts are to succeed while SoL is active.
specifies that serial/modem alerts are to be deferred for the duration of the SoL session.
specifies that serial/modem alerts automatically fail during the SoL session. This is the default.

Specifies that CTS, DTR, and DSR are to be deasserted at the start of the SoL session so that the configuration may be modifeid before the handshake is released.

Be more verbose. Maybe specified multiple time for more output.

Be less verbose. Maybe specified multiple time for less output.

SEE ALSO

openipmi_conparms(7)

KNOWN PROBLEMS

None

AUTHOR

Darius Davis <dariusd@users.sourceforge.net>

05/13/03 OpenIPMI