Public Member Functions¶

SbBox3f (void)
SbBox3f (float xmin, float ymin, float zmin, float xmax, float ymax, float zmax)
SbBox3f (const SbVec3f &minpoint, const SbVec3f &maxpoint)
SbBox3f (const SbBox3d &box)
SbBox3f (const SbBox3s &box)
SbBox3f (const SbBox3i32 &box)
SbBox3f & setBounds (float xmin, float ymin, float zmin, float xmax, float ymax, float zmax)
SbBox3f & setBounds (const SbVec3f &minpoint, const SbVec3f &maxpoint)
SbBox3f & setBounds (const SbBox3d &box)
SbBox3f & setBounds (const SbBox3s &box)
SbBox3f & setBounds (const SbBox3i32 &box)
void getBounds (float &xmin, float &ymin, float &zmin, float &xmax, float &ymax, float &zmax) const
void getBounds (SbVec3f &minpoint, SbVec3f &maxpoint) const
const SbVec3f & getMin (void) const
SbVec3f & getMin (void)
const SbVec3f & getMax (void) const
SbVec3f & getMax (void)
void extendBy (const SbVec3f &pt)
void extendBy (const SbBox3f &box)
void transform (const SbMatrix &matrix)
void makeEmpty (void)
SbBool isEmpty (void) const
SbBool hasVolume (void) const
float getVolume (void) const
SbBool intersect (const SbVec3f &pt) const
SbBool intersect (const SbBox3f &box) const
SbVec3f getClosestPoint (const SbVec3f &point) const
SbBool outside (const SbMatrix &mvp, int &cullbits) const
SbVec3f getCenter (void) const
void getOrigin (float &originX, float &originY, float &originZ) const
void getSize (float &sizeX, float &sizeY, float &sizeZ) const
SbVec3f getSize (void) const
void getSpan (const SbVec3f &dir, float &dmin, float &dmax) const
void print (FILE *file) const

Related Symbols¶

(Note that these are not member symbols.)
int operator== (const SbBox3f &b1, const SbBox3f &b2)
int operator!= (const SbBox3f &b1, const SbBox3f &b2)

SbBox3f::SbBox3f (void) [inline]¶

The default constructor makes an empty box.

SbBox3f::SbBox3f (float minx, float miny, float minz, float maxx, float maxy, float maxz) [inline]¶

Constructs a box with the given corners.

minx should be less than maxx, miny should be less than maxy and minz should be less than maxz if you want to make a valid box.

SbBox3f::SbBox3f (const SbVec3f & minval, const SbVec3f & maxval) [inline]¶

Constructs a box with the given corners.

The coordinates of min should be less than the coordinates of max if you want to make a valid box.

SbBox3f & SbBox3f::setBounds (float minx, float miny, float minz, float maxx, float maxy, float maxz) [inline]¶

Reset the boundaries of the box.

minx should be less than maxx, miny should be less than maxy and minz should be less than maxz if you want to make a valid box.

Returns reference to self.

See also

SbBox3f & SbBox3f::setBounds (const SbVec3f & minval, const SbVec3f & maxval) [inline]¶

Reset the boundaries of the box with the given corners.

The coordinates of min should be less than the coordinates of max if you want to make a valid box.

Returns reference to self.

See also

SbBox3f & SbBox3f::setBounds (const SbBox3d & box)¶

Reset the boundaries to the boundaries of the given box.

Returns reference to self.

See also

SbBox3f & SbBox3f::setBounds (const SbBox3s & box)¶

Reset the boundaries to the boundaries of the given box.

Returns reference to self.

See also

SbBox3f & SbBox3f::setBounds (const SbBox3i32 & box)¶

Reset the boundaries to the boundaries of the given box.

Returns reference to self.

See also

void SbBox3f::getBounds (float & minx, float & miny, float & minz, float & maxx, float & maxy, float & maxz) const [inline]¶

Returns the box boundaries.

See also

void SbBox3f::getBounds (SbVec3f & minobj, SbVec3f & maxobj) const [inline]¶

Returns the box corner points.

See also

const SbVec3f & SbBox3f::getMin (void) const [inline]¶

Returns the minimum point. This should usually be the lower left corner point of the box.

See also

SbVec3f & SbBox3f::getMin (void) [inline]¶

Returns a modifiable reference the minimum point.

const SbVec3f & SbBox3f::getMax (void) const [inline]¶

Returns the maximum point. This should usually be the upper right corner point of the box.

See also

SbVec3f & SbBox3f::getMax (void) [inline]¶

Returns a modifiable reference the maximum point.

void SbBox3f::extendBy (const SbVec3f & point)¶

Extend the boundaries of the box by the given point, i.e. make the point fit inside the box if it isn't already so.

void SbBox3f::extendBy (const SbBox3f & box)¶

Extend the boundaries of the box by the given box parameter. This is equal to calling extendBy() twice with the corner points.

void SbBox3f::transform (const SbMatrix & matrix)¶

Transform the box by the matrix, and change its boundaries to contain the transformed box.

Doesn't touch illegal/empty boxes.

void SbBox3f::makeEmpty (void)¶

Marks this as an empty box.

See also

SbBool SbBox3f::isEmpty (void) const [inline]¶

Check if this has been marked as an empty box.

See also

SbBool SbBox3f::hasVolume (void) const [inline]¶

Check if the box has been correctly specified and by that virtue has volume.

float SbBox3f::getVolume (void) const [inline]¶

Check if the box has 'positive' volume, i.e. the lower left corner is actually lower and more left than the maximum point.

SbBool SbBox3f::intersect (const SbVec3f & point) const¶

Check if the given point lies within the boundaries of this box.

SbBool SbBox3f::intersect (const SbBox3f & box) const¶

Check if the given box lies wholly or partly within the boundaries of this box.

SbVec3f SbBox3f::getClosestPoint (const SbVec3f & point) const¶

Return the point on the box closest to the given point.

SbBool SbBox3f::outside (const SbMatrix & mvp, int & cullbits) const¶

Check if the box is outside the view volume defined by the mvp matrix. Sets cullbits according to which planes we're inside or outside. Bit 0 (0x1) is cleared when box is completely inside left and right clipping planes. Bit 1 (0x2) is cleared when box is inside top and bottom clipping planes. Bit 2 (0x4) is cleared when box is inside near and far clipping planes.

Returns TRUE if box is completely outside one of the clipping planes. FALSE otherwise.

SbVec3f SbBox3f::getCenter (void) const [inline]¶

Returns the center point of the box.

void SbBox3f::getOrigin (float & x0, float & y0, float & z0) const [inline]¶

Returns the coordinates of the box origin (i.e. the lower left corner).

See also

void SbBox3f::getSize (float & dx, float & dy, float & dz) const [inline]¶

Returns width, height and depth of box.

SbVec3f SbBox3f::getSize (void) const [inline]¶

Returns width, height and depth of box as a 3D vector.

Since

void SbBox3f::getSpan (const SbVec3f & dir, float & dmin, float & dmax) const¶

Find the span of the box in the given direction (i.e. how much room in the given direction the box needs). The distance is returned as the minimum and maximum distance from origo to the closest and furthest plane defined by the direction vector and each of the box' corners. The difference between these values gives the span.

void SbBox3f::print (FILE * fp) const¶

Dump the state of this object to the file stream. Only works in debug version of library, method does nothing in an optimized compile.

int operator== (const SbBox3f & b1, const SbBox3f & b2) [related]¶

Check b1 and b2 for equality.

int operator!= (const SbBox3f & b1, const SbBox3f & b2) [related]¶

Check b1 and b2 for inequality.