Scroll to navigation

LVMAUTOACTIVATION(7) LVMAUTOACTIVATION(7)

NAME

lvmautoactivation — LVM autoactivation

DESCRIPTION

Autoactivation is the activation of LVs performed automatically by the system in response to LVM devices being attached to the machine. When all PVs in a VG have been attached, the VG is complete, and LVs in the VG are activated.

Autoactivation of VGs, or specific LVs, can be prevented using vgchange or lvchange --setautoactivation n. The lvm.conf auto_activation_volume_list is another way to limit autoactivation.

event autoactivation

LVM autoactivation is "event based", in which complete VGs are activated in response to uevents which occur during system startup or at any time after the system has started. An old form of autoactivation was "static" in which complete VGs are activated at a fixed point during system startup by a systemd service, and not in response to events.

Event based autoactivation is driven by udev, udev rules, and systemd. When a device is attached to a machine, a uevent is generated by the kernel to notify userspace of the new device. systemd-udev runs udev rules to process the new device. Udev rules use blkid to identify the device as an LVM PV and then execute the lvm-specific udev rule for the device, which triggers autoactivation.

There are two variations of event based autoactivation that may be used on a system, depending on the LVM udev rule that is installed (found in /lib/udev/rules.d/.) The following summarizes the steps in each rule which lead to autoactivation:

69-dm-lvm-metad.rules

device /dev/name with major:minor X:Y is attached to the machine
systemd/udev runs blkid to identify /dev/name as an LVM PV
udev rule 69-dm-lvm-metad.rules is run for /dev/name
the lvm udev rule runs the systemd service lvm2-pvscan@X:Yservice
the lvm2-pvscan service runs:
pvscan --cache -aay --major X --minor Y
pvscan reads the device, records that the PV is online (see pvs_online), and checks if the VG is complete.
if the VG is complete, pvscan creates the vgs_online temp file, and activates the VG.
the activation command output can be seen from systemctl status lvm2-pvscan*

69-dm-lvm.rules

device /dev/name with major:minor X:Y is attached to the machine
systemd/udev runs blkid to identify /dev/name as an LVM PV
udev rule 69-dm-lvm.rules is run for /dev/name
the lvm udev rule runs:
pvscan --cache --listvg --checkcomplete --vgonline
--autoactivation event --udevoutput --journal=output /dev/name
pvscan reads the device, records that the PV is online (see pvs_online), and checks if the VG is complete.
if the VG is complete, pvscan creates the vgs_online temp file, and prints the name of the VG for the udev rule to import: LVM_VG_NAME_COMPLETE='vgname'
if the lvm udev rule sees LVM_VG_NAME_COMPLETE from pvscan, it activates the VG using a transient systemd service named lvm-activate-<vgname>.
the lvm-activate-<vgname> service runs
vgchange -aay --autoactivation event <vgname>
the activation command output can be seen from journalctl -u lvm-activate-<vgname>

pvscan options

--cache
Read the <device> arg (and only that device), and record that the PV is online by creating the /run/lvm/pvs_online/<pvid> file containing the name of the VG and the device for the PV.

-aay
Activate the VG from the pvscan command (includes implicit --checkcomplete and --vgonline.)

--checkcomplete
Check if the VG is complete, i.e. all PVs are present on the system, by checking /run/lvm/pvs_online/<pvid> files.

--vgonline
Create /run/lvm/vgs_online/<vgname> if the VG is complete (used to ensure only one command performs activation.)

--autoactivation event
Inform the command it is used for event based autoactivation.

--listvg
Print the name of the VG using the device.

--udevoutput
Only print output that can be imported to the udev rule, using the udev environment key format, i.e. NAME='value'.

--journal=output
Send standard command output to the journal (when stdout is reserved for udev output.)

run files

Autoactivation commands use a number of temp files in /run/lvm (with the expectation that /run is cleared between boots.)

pvs_online
pvscan --cache creates a file here for each PV that is attached. The file is named with the PVID and contains the VG name and device information. The existence of the file is used to determine when all PVs for a given VG are present. The device information in these files is also used to optimize locating devices for a VG when the VG is activated.

pvs_lookup
pvscan --cache creates a file here named for a VG (if one doesn't already exist.) The file contains a list of PVIDs in the VG. This is needed when a PV is processed which has no VG metadata, in which case the list of PVIDs from the lookup file is used to check if the VG is complete.

vgs_online
The first activation command (pvscan or vgchange) to create a file here, named for the VG, will activate the VG. This resolves a race when concurrent commands attempt to activate a VG at once.

static autoactivation

A static autoactivation method is no longer provided by lvm. Setting event_activation=0 still disables event based autoactivation. WARNING: disabling event activation without an alternative may prevent a system from booting. A custom systemd service could be written to run autoactivation during system startup, in which case disabling event autoactivation may be useful.

lvm.conf filter

Device symlinks from /dev/disk/ can be used in the lvm.conf filter to guard against changes in kernel device names. The /dev/disk/by-path/ or /dev/disk/by-id/ prefixes should be included in the filter names; these prefixes help lvm detect that symlink names are used. Filters containing symlinks require special matching by commands run in the lvm udev rule.

Common symlinks, e.g. beginning with wwn-, scsi-, pci-, or lvm-pv-uuid-, are recommended. Uncommon or custom symlinks created by custom udev rules may be less reliable. If a custom udev rule creates symlinks used in the lvm filter, then the udev rule should be started prior to the lvm rule.

EXAMPLES

VG "vg" contains two PVs:

$ pvs -o name,vgname,uuid /dev/sdb /dev/sdc

PV VG PV UUID
/dev/sdb vg 1uKpaT-lFOZ-NLHX-j4jI-OBi1-QpdE-HZ5hZY
/dev/sdc vg 5J3tM8-aIPe-2vbd-DBe7-bvRq-TGj0-DaKV2G

use of --cache:

$ pvscan --cache /dev/sdb

pvscan[12922] PV /dev/sdb online. $ pvscan --cache /dev/sdc
pvscan[12923] PV /dev/sdc online. $ cat /run/lvm/pvs_online/1uKpaTlFOZNLHXj4jIOBi1QpdEHZ5hZY 8:16 vg:vg dev:/dev/sdb $ cat /run/lvm/pvs_online/5J3tM8aIPe2vbdDBe7bvRqTGj0DaKV2G 8:32 vg:vg dev:/dev/sdc

use of -aay:

$ pvscan --cache -aay /dev/sdb

pvscan[12935] PV /dev/sdb online, VG vg incomplete (need 1). $ pvscan --cache -aay /dev/sdc
pvscan[12936] PV /dev/sdc online, VG vg is complete.
pvscan[12936] VG vg run autoactivation.
1 logical volume(s) in volume group "vg" now active $ cat /run/lvm/pvs_online/1uKpaTlFOZNLHXj4jIOBi1QpdEHZ5hZY 8:16 vg:vg dev:/dev/sdb $ cat /run/lvm/pvs_online/5J3tM8aIPe2vbdDBe7bvRqTGj0DaKV2G 8:32 vg:vg dev:/dev/sdc $ ls /run/lvm/vgs_online/vg /run/lvm/vgs_online/vg

use of --listvg:

$ pvscan --cache --listvg /dev/sdb

VG vg $ pvscan --cache --listvg /dev/sdc
VG vg $ cat /run/lvm/pvs_online/1uKpaTlFOZNLHXj4jIOBi1QpdEHZ5hZY 8:16 vg:vg dev:/dev/sdb $ cat /run/lvm/pvs_online/5J3tM8aIPe2vbdDBe7bvRqTGj0DaKV2G 8:32 vg:vg dev:/dev/sdc

use of --checkcomplete:

$ pvscan --cache --listvg --checkcomplete --vgonline /dev/sdb

pvscan[12996] PV /dev/sdb online, VG vg incomplete (need 1).
VG vg incomplete $ pvscan --cache --listvg --checkcomplete --vgonline /dev/sdc
pvscan[12997] PV /dev/sdc online, VG vg is complete.
VG vg complete

use of --udevoutput:

$ pvscan --cache --listvg --checkcomplete --vgonline --udevoutput /dev/sdb
LVM_VG_NAME_INCOMPLETE='vg'
$ pvscan --cache --listvg --checkcomplete --vgonline --udevoutput /dev/sdc
LVM_VG_NAME_COMPLETE='vg'

use of --listlvs:

$ lvs -o name,devices vg

LV Devices
lvol0 /dev/sdb(0)
lvol1 /dev/sdc(0)
lvol2 /dev/sdb(1),/dev/sdc(1) $ pvscan --cache --listlvs --checkcomplete /dev/sdb
pvscan[13288] PV /dev/sdb online, VG vg incomplete (need 1).
VG vg incomplete
LV vg/lvol0 complete
LV vg/lvol2 incomplete $ pvscan --cache --listlvs --checkcomplete /dev/sdc
pvscan[13289] PV /dev/sdc online, VG vg is complete.
VG vg complete
LV vg/lvol1 complete
LV vg/lvol2 complete

LVM TOOLS 2.03.24(2) (2024-05-16) Red Hat, Inc