Scroll to navigation

FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)

NAME

fence_ilo2 - Fence agent for HP iLO

fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

fence_ilo2 is a Power Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.

fence_ilo2 accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo2 can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

Fencing action (Default Value: reboot)
IP address or hostname of fencing device
TCP/UDP port to use for connection with device (Default Value: 443)
Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.
Login password or passphrase
Script to run to retrieve password
IP address or hostname of fencing device (together with --port-as-ip)
Force ribcl version to use
Use SSL connection with verifying certificate (Default Value: 1)
Use SSL connection without verifying certificate
Use SSL connection with verifying certificate
Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up.
Login name This parameter is always required.
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
Write debug information to given file
Display version information and exit
Display help and exit
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
Wait X seconds before fencing is started (Default Value: 0)
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
Wait X seconds for cmd prompt after login (Default Value: 10)
Make "port/plug" to be an alias to IP address
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 0)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
Count of attempts to retry power on (Default Value: 3)
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

Power on machine.
Power off machine.
Reboot machine.
This returns the status of the plug/virtual machine.
Check the health of fence device
Display the XML metadata describing this resource.

The operational behavior of this is not known.
Validate if all required parameters are entered.

STDIN PARAMETERS

Fencing action (Default Value: reboot)
IP address or hostname of fencing device Obsoletes: ipaddr
TCP/UDP port to use for connection with device (Default Value: 443)
Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.
Login password or passphrase Obsoletes: passwd
Script to run to retrieve password Obsoletes: passwd_script
IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port
Force ribcl version to use Obsoletes: ribcl
Use SSL connection with verifying certificate (Default Value: 1)
Use SSL connection without verifying certificate
Use SSL connection with verifying certificate
Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up.
Login name This parameter is always required. Obsoletes: login
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
Write debug information to given file Obsoletes: debug
Display version information and exit
Display help and exit
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
Wait X seconds before fencing is started (Default Value: 0)
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
Wait X seconds for cmd prompt after login (Default Value: 10)
Make "port/plug" to be an alias to IP address
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 0)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
Count of attempts to retry power on (Default Value: 3)
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
2009-10-20 fence_ilo2 (Fence Agent)